Parts Organizer Small: 3 Drawer and Box Picks for the Workbench
A small parts organizer keeps screws, fasteners and small hardware sorted at the workbench, and this guide covers drawer cabinets and latching boxes that fit a small garage.
On this page
A brake job leaves a bench covered in fasteners: caliper bolts in a pile, clips beside them, washers mixed in with screws that all look alike until the wrong piece goes back in the wrong hole. A parts organizer small enough to sit beside the work keeps each kind of fastener in its own drawer or compartment, so the right piece is in hand when the wrench turns. This guide covers drawer cabinets and latching boxes for a small garage workbench.
As an Amazon Associate I earn from qualifying purchases. GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: what a small parts organizer is, drawer cabinets against latching boxes, the picks for the bench, and how to size a pick.
| # | Product | Shop Score | Buy |
|---|---|---|---|
| 1 |  IRIS USA 64-Drawer Screw Organizer | 9.6/10 | Buy on Amazon |
| 2 |  Amazon Basics 19-Removable Compartment Small Parts | 9.6/10 | Buy on Amazon |
| 3 |  CRAFTSMAN Storage Organizer | 9.6/10 | Buy on Amazon |
IRIS USA 64-Drawer Screw Organizer
A 64-drawer cabinet for screws, nails and electronics components, made in the USA, that stacks or mounts on the wall.
Pros
- 64 small drawers sort tiny parts by kind
- Drawers measure 6.87 by 2.12 by 1.62 in
- Stacks on built-in grooves or mounts on the wall
- Made in the USA from durable, recyclable materials
Cons
- Depth and width read in opposite order in the bullets and the spec table
- No warranty term is stated
- 1.62 in drawer height limits each drawer to small parts
- 6.09 lb before it holds any parts
Amazon Basics 19-Removable Compartment Small Parts
A portable box with 19 removable compartments, a clear lid and a carrying handle, sized 16.5 by 13.2 by 2.4 in.
Pros
- 19 removable compartments in varied sizes
- Clear lid shows contents without opening
- Heavy-duty latches lock the lid down
- Built-in handle carries it to the job
Cons
- No warranty term is stated
- Fewer part kinds fit than in a 64-drawer cabinet
- 2.4 in depth limits tall parts
- No stacking feature is stated
CRAFTSMAN Storage Organizer
A 3-pack of latching boxes with 10 compartments each and removable dividers, sized 11.5 by 2.5 by 8.5 in.
Pros
- 3-pack, 10 compartments in each box
- Removable dividers change compartment sizes
- Two side latches lock the top lid
- Lid interlocks with dividers
Cons
- No warranty term is stated
- 2.5 in depth limits tall parts
- No clear lid is stated
- No carrying handle is stated
Parts organizer small: what it means at the workbench
A small parts organizer is a compact box or cabinet divided into many small compartments, made to hold screws, nails, fasteners and other small hardware that would otherwise roll around a drawer or sit in a mixed pile. The point is the sort, not the box: each kind of part gets its own space.
Size is the whole question here. A cabinet with many small drawers suits a bench where fasteners are sorted by kind and stay put. A latching box suits parts that travel from the bench to the car and back, since the lid holds the sort in place. Either shape earns its place only when the compartments fit the parts.
Drawer cabinet or latching box: which shape fits the job
The drawer cabinet is the bench fixture. It sits in a fixed spot and holds a wide sort: screws by size, nails by length, and electronics components each in their own drawer. The IRIS USA cabinet follows this shape, with drawers for screws, nails, electronics components and hardware, and it stacks or mounts on the wall to free bench space.
The latching box is the carrier. It closes with latches and rides to the car on its handle or in a tool bag. The Amazon Basics box follows this shape, with a clear lid that shows the contents and a built-in handle.
The CRAFTSMAN boxes follow it too, with lids that interlock with the dividers to keep parts from moving between compartments.
Parts organizer small: the 3 picks for the bench
Sorting starts with the fasteners themselves: screws and small hardware go in the drawer cabinet at the bench, while the latching boxes carry the rest to the job.
How to size a small parts organizer before buying
| Pick | Size | Compartments | Lid |
|---|---|---|---|
| IRIS USA 64-Drawer | 7 x 19.5 x 15.5 in | 64 drawers | Drawers, no lid stated |
| Amazon Basics TO-002 | 16.5 x 13.2 x 2.4 in | 19 removable | Clear lid, heavy-duty latches |
| CRAFTSMAN CMST60964M | 11.5 x 2.5 x 8.5 in | 10 per box | Lid interlocks with dividers |
- Measure the tallest part against the drawer depth. A drawer that is too shallow leaves the part proud of the top.
- Measure the bench space the cabinet or box will occupy. A cabinet that hangs over the edge gets knocked.
- Count the kinds of parts, then match the drawer or compartment count.
- Check the lid. Latches or an interlocking lid keep the sort in place when the box moves.
- Decide bench, wall or travel. Stacking, wall mounting and a handle change where the box lives.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Keeping small parts sorted after the sort
A sort holds when every part goes back to its drawer or compartment after the job.
FAQ: garage tools
How many compartments does a small parts organizer need?
As many as the kinds of parts you sort. The IRIS USA cabinet lists 64 small drawers for a bench sort, and the Amazon Basics box lists 19 compartments for a smaller sort.
Can a small parts organizer hold screws and nails?
Yes. The IRIS USA listing names screws, nails, electronics components and hardware among the parts its drawers hold. The Amazon Basics listing names small parts, hardware and accessories, and the CRAFTSMAN listing names small parts and larger hand tools.
Should a parts organizer sit on the bench or hang on the wall?
Either, if the listing allows it. The IRIS USA cabinet stacks on built-in grooves or mounts on the wall. The CRAFTSMAN boxes stack. The Amazon Basics box carries by its built-in handle.
What keeps small parts from moving between compartments?
The lid and the dividers. The CRAFTSMAN lid interlocks with the dividers, which the listing states prevents movement of small parts from one compartment to another, and its two side latches lock the top lid. The Amazon Basics lid locks down with heavy-duty latches, which the listing states keeps contents stored during transport.
How do I check that a drawer fits the parts I sort?
Measure the part against the drawer size in the listing. The IRIS USA drawers measure 6.87 in long, 2.12 in wide and 1.62 in high. The Amazon Basics box is 2.4 in deep. Each CRAFTSMAN box is 2.5 in deep.
Related: tool storage, the best tool storage for a small garage, our screwdriver bit organizer picks and the socket organizer picks.
