Best Zip Tie Gun (2026): 5 Guns Compared
Five zip tie guns for nylon and stainless steel ties, compared by tie width, tension settings, build, length and warranty.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallRV Rhodes 427089.5/10View on Amazon - 2
Widest Tie RangeKnoweasy 5199.5/10View on Amazon - 3
Best Steel BuildKnoweasy 600A9.5/10View on Amazon - 4
Best for Stainless TiesDelgada D049.4/10View on Amazon
A bundle of wires under the dash turns into a rat’s nest without a tie gun: loose loops snag, tails poke out, and hand-pulled ties never sit as tight as they should. A zip tie gun pulls each tie to the same tension and cuts the tail flush, so the bundle stays neat and nothing sharp sticks out. Picking the best zip tie gun comes down to tie width, tension control, and whether the ties are nylon or stainless steel, and the guns below are scored on what each listing states.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall RV Rhodes 42708: Adjustable tension, built-in cutter, ties up to 1/4 in, and the only stated warranty here, 12 months. Check price on Amazon
- Widest Tie Range Knoweasy 519: Handles nylon ties from 0.11 to 0.35 inches wide, the widest range in this set. Check price on Amazon
- Best Steel Build Knoweasy 600A: Die-cast steel flush-cut tool with a steel handle and dial adjuster, 7 inches long. Check price on Amazon
- Best for Stainless Ties Delgada D04: The only gun here for stainless steel ties, with 4 tension levels and automatic cutting. Check price on Amazon
Picks for the garage
RV RHODES 42708 Zip Tie Gun/Cable Tie Install
An adjustable-tension zip tie gun with a built-in cutter for nylon ties up to 1/4 inch wide, and the only stated warranty here at 12 months.
Pros
- Adjustable tension with a built-in cutter
- Handles nylon ties up to 1/4 inch wide
- 12-month warranty, the only stated warranty here
- Compact at 6.0 inches long and 11.0 ounces
Cons
- No tie material is stated beyond nylon
- No minimum tie width is stated
- No stated tension levels or settings count
- No handle material or grip detail is stated
Cable Tie Gun,Knoweasy Zip Tie Tool and Tensioning
A zip tie gun for nylon ties from 0.11 to 0.35 inches wide, the widest range in this set, with an ergonomic grip and a 12-month service stated.
Pros
- Widest tie range here: 0.11 to 0.35 inches
- Ergonomic grip for tightening varied tie sizes
- A 12-month worry-free service is stated
- Suits electrical, industrial and construction work, as the listing states
Cons
- States a 12-month service, not a warranty term
- No tension adjustment is stated
- No cutter detail is stated beyond tensioning and cutting
- No length or dimensions are stated in the listing
Cable Tie Gun,Knoweasy Fastening Cable Tie
A die-cast steel flush-cut gun with a steel handle and dial adjuster for nylon ties from 0.09 to 0.19 inches, 7 inches long.
Pros
- Die-cast steel body with a steel handle
- Flush cut with a dial adjuster for smooth cutting
- 7 inches long with an ergonomic handle and trigger
- A 12-month worry-free service is stated
Cons
- States a 12-month service, not a warranty term
- Tie range tops out at 0.19 inches, narrower than the 519
- No tension setting count is stated
- No cutter blade detail is stated beyond flush cut
Krismose Cable Tie Gun, Die-Cast Steel Flush Cut
A die-cast steel flush-cut gun with a 1 to 3 tension dial for nylon ties from 0.09 to 0.19 inches, 6.29 inches long.
Pros
- Die-cast steel body with a flush cut and no sharp edges
- Tension dial with 1 to 3 levels
- Contoured handle and trigger for one-hand use
- Handles standard nylon ties from 0.09 to 0.19 inches
Cons
- Title says 6.29 inches while the spec table says 6.1 inches
- No warranty term is stated in the listing
- Tie range tops out at 0.19 inches
- No weight is stated in the listing
Delgada Metal Cable Tie Gun for Stainless Steel
A high carbon steel gun for stainless steel ties only, with automatic tightening and cutting and 4 tension levels.
Pros
- Made of high carbon steel for stainless steel ties
- Automatically tightens and cuts the excess tie
- 4 tension levels, with level 4 the most tightening force
- Smooth cut with no burr, as the listing states
Cons
- Cuts stainless steel ties only, not nylon ties
- No warranty term is stated in the listing
- Tie thickness is limited to within 0.3 mm
- No weight is stated in the listing
Compared on paper
| Model | Shop Score | Tie width | Tension | Length | Material | Warranty |
|---|---|---|---|---|---|---|
| RV Rhodes 42708 | 9.5/10 | Up to 1/4 in | Adjustable | 6.0 in | Not stated | 12 months |
| Knoweasy 519 | 9.5/10 | 0.11 to 0.35 in | Not stated | Not stated | Not stated | None stated |
| Knoweasy 600A | 9.5/10 | 0.09 to 0.19 in | Dial adjuster | 7 in | Die-cast steel | None stated |
| Krismose ZDQ002 | 9.5/10 | 0.09 to 0.19 in | 1-3 levels | 6.29 in | Die-cast steel | None stated |
| Delgada D04 | 9.4/10 | Up to 7.9 mm | 4 levels | 7.08 in | High carbon steel | None stated |
Specifications are manufacturer rated, as published on each listing and collected 2 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each gun is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No gun here states a safety listing, so every gun here scores zero on that criterion. Only the RV Rhodes gun states a warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| RV Rhodes 42708 | 9.5 | 29 | 20 | 20 | 0 | 3 |
| Knoweasy 519 | 9.5 | 32 | 20 | 21 | 0 | 0 |
| Knoweasy 600A | 9.5 | 30 | 21 | 20 | 0 | 0 |
| Krismose ZDQ002 | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Delgada D04 | 9.4 | 28 | 21 | 19 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
Five listings were read for this guide. All five state a tie width, while three state a tension adjustment and three state a build material. Only one states a warranty term, and none states a safety listing. One listing disagrees with itself on length, and one gun cuts stainless steel ties only.
Buying guide: how to pick the best zip tie gun
Tie width first
Match the gun to the ties on the shelf. The Knoweasy 519 takes nylon ties from 0.11 to 0.35 inches wide, the widest range here, while the RV Rhodes gun takes ties up to 1/4 inch. The Knoweasy 600A and the Krismose gun take ties from 0.09 to 0.19 inches. The Delgada gun takes stainless steel ties up to 7.9 mm wide and 0.3 mm thick, and it only cuts stainless steel ties.
Tension settings
A tension dial sets how tight the tie pulls before the cutter fires. The Krismose gun has 1 to 3 levels, and the Delgada gun has 4 levels, with level 1 for cutting and level 4 for the most tightening force. The RV Rhodes gun has adjustable tension without a stated setting count. The two Knoweasy guns state no tension adjustment.
Flush cut and sharp tails
A flush cut leaves no sharp tail sticking out of the bundle. The Knoweasy 600A and the Krismose gun both state a flush cut, and the Krismose listing adds that the cut leaves no sharp edges. The Delgada listing states a smooth cut with no burr. Check the cut on a spare tie before working through a full bundle.
Nylon or stainless steel
Four guns here are for nylon ties, and the Delgada gun cuts stainless steel ties only. Nylon ties suit wiring, loom and general bundling in the garage. Stainless steel ties suit the power, pipeline and sign work the Delgada listing names. Pick the gun that matches the ties already in the drawer.
Length and storage
Lengths here run from 6.0 inches for the RV Rhodes gun to 7.08 inches for the Delgada gun, with the Knoweasy 600A at 7 inches. The Delgada gun has a hook on top for carrying and storage. The Knoweasy 519 states no length, so check the fit in the drawer before ordering.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Match the gun to the ties on hand: nylon ties from 0.09 to 0.35 inches across these guns, and stainless steel ties only for the Delgada gun.
- Check the tension settings before the first bundle: the Krismose gun has 1 to 3 levels and the Delgada gun has 4 levels.
- Confirm the gun fits the drawer or tool bag: lengths run from 6.0 to 7.08 inches where stated, and the Delgada gun has a hook on top for storage.
- Check the warranty on arrival: only the RV Rhodes gun states a 12-month warranty.
- Keep spare ties in the sizes the gun takes, since a gun that takes ties up to 0.19 inches cannot pull a 0.35 inch tie.
FAQ: garage tools
How does a zip tie gun work?
Feed the tie through the head, squeeze the handle, and the gun pulls the tie tight, then the cutter trims the tail flush. The RV Rhodes gun tightens and cuts with a squeeze of the handle, and the Knoweasy 600A uses a dial adjuster to cut the tie smoothly. A flush cut leaves no sharp tail sticking out of the bundle.
What tie width should the gun take?
Match the gun to the ties on the shelf. The Knoweasy 519 takes nylon ties from 0.11 to 0.35 inches wide, the widest range here. The RV Rhodes gun takes ties up to 1/4 inch, and the Knoweasy 600A and Krismose gun take ties from 0.09 to 0.19 inches. The Delgada gun takes stainless steel ties up to 7.9 mm wide.
Can a zip tie gun cut stainless steel ties?
Only a gun made for them. The Delgada gun cuts stainless steel ties only, with 4 tension levels and automatic cutting. The other four guns here are for nylon ties, so check the tie type before buying.
Do I need adjustable tension on a zip tie gun?
A tension dial lets the pull be set for the job. The Krismose gun has 1 to 3 levels, and the Delgada gun has 4 levels, with level 1 for cutting and level 4 for the most tightening force. The RV Rhodes gun has adjustable tension without a stated setting count, and the two Knoweasy guns state no tension adjustment.
Related: the diagnostics and electrical hub, the best wire connectors, the best wire loom kit, split vs braided wire loom, and the best wire stripper kit.
