Best Corded Reciprocating Saw: 4 Picks (2026)

Compare the picks

Specifications are manufacturer rated, as published on each listing and collected 20 October 2026. “Not stated” means the listing does not give the figure.

How we scored them

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

What the listings tell you

We read four corded recip saw listings. Stated amps run 7.5 to 15. Two state a stroke length: 1-1/8 inches and 1-1/4 inches. Three state vibration control by name. Two state a warranty term: 3-year and 1-year limited. One states an OSHA specification met.

How to pick the best corded reciprocating saw

Amps and power

Stated amps: the Makita at 15, the SKIL SPT44A at 13, the DEWALT at 12 and the Skil 9206 at 7.5. Stated wattage: the SKIL SPT44A at 1560, the Makita at 1510, the DEWALT at 1100 and the Skil 9206 at 900. For heavy demolition, the Makita’s stated 15 amps is the most; for lighter garage cutting, the Skil 9206’s stated 7.5 amps is the stated entry point.

Stroke length and speed

The DEWALT states 0 to 2,900 SPM with a 1-1/8-inch stroke length. The Makita states a 1-1/4-inch stroke with a variable speed control dial and electronic speed control that maintains constant speed under load. The SKIL SPT44A and Skil 9206 state variable speed with no stroke figure. For faster cutting, the Makita’s stated 1-1/4-inch stroke is the longest here.

Vibration control

The Makita states Anti-Vibration Technology with an internal counterbalance system. The SKIL SPT44A states patented Buzzkill technology that suppresses vibration up to 35 percent better than the competition. The Skil 9206 states a counter balance for vibration control. The DEWALT states no vibration feature. For long cutting sessions, the named vibration systems are the stated differentiators.

Blade changes

The DEWALT states a keyless, lever-action 4-position blade clamp for flush cutting. The SKIL SPT44A states a secure tool-less blade clamp. The Skil 9206 states tool-less blade change. The Makita states no blade-change figure. For flush cuts against a surface, the DEWALT’s stated 4-position clamp is the named feature.

Warranty

The DEWALT states a 3-year limited warranty, the longest stated term. The SKIL SPT44A states a 1-year limited warranty. The Skil 9206 states a limited warranty with no term, and the Makita states warranty with no term. For stated coverage, the DEWALT’s 3-year term is the leader.

Speed control per listing

Triggers and dials

The DEWALT states a variable speed trigger that lets the user instantly control speed. The Makita states a variable speed control dial to match speed to the application, plus electronic speed control that maintains constant speed under load, with a large 2-finger trigger and lock-on button. The SKIL SPT44A states a variable speed trigger that controls tool speed for cutting specialized materials, with an oversize trigger for cutting in multiple positions. The Skil 9206 states variable speed with no trigger detail. For matching speed to the material, the Makita’s stated dial is the most precise stated control; for trigger work, the DEWALT and SKIL SPT44A state variable triggers.

Constant speed under load

Only the Makita states electronic speed control that maintains constant speed under load. The other three state variable speed with no load-compensation claim. For cutting dense material that bogs a saw down, the Makita’s stated constant-speed feature is the named difference.

Handle design and ergonomics

What each listing states

The Makita states a large 2-finger trigger with a lock-on button for added convenience. The SKIL SPT44A states an oversize trigger for flexibility in multiple positions. The Skil 9206 states an ergonomic handle as a special feature. The DEWALT states a plastic handle material with no ergonomic claim. The SKIL SPT44A states handle materials of plastic, rubber and aluminum. For gloved garage work, the Makita’s stated lock-on button and the SKIL SPT44A’s stated oversize trigger are the named comfort features.

Dimensions and weight

The DEWALT states 19.38 by 7.13 by 4 inches at 8 lb. The Skil 9206 states 18 by 5.5 by 3.38 inches at 7.1 lb, the lightest stated here. The SKIL SPT44A states 19.7 by 3.6 by 8 inches at 9 lb, the heaviest stated here. The Makita states 26.5 by 11.5 by 4.75 inches at 4.6 kg. For overhead or one-handed work, the Skil 9206’s stated 7.1 lb is the lightest; for two-handed demolition, the SKIL SPT44A’s stated 9 lb reflects its 13-amp motor.

Blades and materials

Blade figures stated

The DEWALT states an 8-inch high speed steel blade. The SKIL SPT44A states an 8-inch blade in alloy steel and high speed steel. The Makita states a 4-inch high speed steel blade. The Skil 9206 states a metal blade with no length figure, plus a wood cutting blade in the box. Surface recommendations stated: wood for the DEWALT, the Skil 9206 and the SKIL SPT44A; metal for the Makita. For exhaust and metal cutting, the Makita’s stated metal recommendation is the named pick; for wood demolition, the other three state wood.

What is in the box

The DEWALT states one recip saw and one manual in the box. The Skil 9206 states one recip saw, one wood cutting blade and a wrench. The SKIL SPT44A states the saw only. The Makita states no clear box contents figure. For starting work out of the box, the Skil 9206’s stated blade and wrench are the most complete stated kit.

Power source details

Corded 120V

The DEWALT, Skil 9206 and SKIL SPT44A each state a corded electric power source at 120 volts. The Makita’s title states 15 AMP with no voltage figure; its spec table shows conflicting figures, so the review follows the title. All four are corded saws with no battery to charge, which is the stated advantage of this category: continuous power for long cuts.

Wattage and efficiency

Stated wattage: the SKIL SPT44A at 1560, the Makita at 1510, the DEWALT at 1100 and the Skil 9206 at 900. Higher stated watts track with higher stated amps here. For a shop circuit, all four run on standard 120V outlets per the three listings that state voltage.

Blade clamps and pivoting feet

Clamp designs stated

The DEWALT states a keyless, lever-action 4-position blade clamp that allows flush cutting and increased versatility. The SKIL SPT44A states a secure tool-less blade clamp that holds up to harsh jobsite demands. The Skil 9206 states tool-less blade change. The Makita states no blade-clamp figure. For flush cuts against a wall or floor, the DEWALT’s stated 4-position clamp is the only named flush-cutting feature here; for fast blade swaps, all three SKIL and DEWALT listings state tool-less designs.

Pivoting foot

Only the Skil 9206 states a pivoting foot, described as providing additional stability when cutting tough materials. The other three state no foot figure. For steady cutting on uneven stock, the Skil 9206’s stated pivoting foot is the named feature.

Gear housing and durability

What the listings state

The Skil 9206 states a heavy duty metal gear housing for added ruggedness and durability. The DEWALT states a brushless motor as a special feature. The Makita states brushless as a special feature as well. The SKIL SPT44A states no gear-housing or motor-type figure beyond its 13-amp motor. For stated housing toughness, the Skil 9206’s metal gear housing is the named build detail.

Finish and grip materials

The DEWALT states a yellow color with a plastic handle. The SKIL SPT44A states red with handle materials of plastic, rubber and aluminum. The Makita states green and black with a plastic handle. The Skil 9206 states multi color with a plastic handle. For grip comfort in the listing text, the SKIL SPT44A’s stated rubber handle component is the only named anti-slip material.

Frequently Asked Questions

Which states the most amps?

The Makita at a stated 15 amps. The SKIL SPT44A states 13, the DEWALT 12 and the Skil 9206 7.5.

Which state a stroke length?

The Makita at a stated 1-1/4 inches and the DEWALT at 1-1/8 inches. The SKIL pair states no stroke figure.

Which state vibration control?

The Makita with stated AVT, the SKIL SPT44A with stated Buzzkill, and the Skil 9206 with a stated counter balance. The DEWALT states none.

Which state a warranty term?

The DEWALT at a stated 3-year limited warranty and the SKIL SPT44A at a stated 1-year limited warranty. The other two state no term.

Related: the best air impact wrench for dually trucks and the lug wrench vs impact wrench comparison.