Best Oil Filter Wrench Under 25 (2026): 5 Picks
Best oil filter wrench under 25: five wrenches compared on type, size range, drive, build and warranties.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Best OverallGEARWRENCH 3529D9.7/10View on Amazon - 2
Best UniversalWORKPRO 3-Jaw9.6/10View on Amazon - 3
Best for ToyotaSpurtar 64mm Cap9.6/10View on Amazon - 4
Best Tight SpaceDURATECH Swivel9.5/10View on Amazon - 5
GEARWRENCH Heavy-Duty Oil Filter Wrench 3-3/4" to 4-1/2"View on Amazon - 6
Lisle 57030 Standard Oil Filter Swivel WrenchView on Amazon - 7
Lisle 63600 Car Oil Filter Wrench for 2-1/2" to 3-1/8" FiltersView on Amazon - 8
LIBRATON 2PCS Strap Wrench SetView on Amazon
Verdict. The GEARWRENCH 3529D is the most complete pick, with 9-inch capacity, dual drive and a stated 1 year warranty. The WORKPRO is the universal pick with 3 jaws and a magnetic head. The Spurtar is the Toyota pick at 64mm. The DURATECH is the tight-space pick. The ValueMax is the 2-piece pick.
Best oil filter wrench under 25 is about the filter you own: a cap wrench that fits one housing exactly, a strap wrench that fits everything, or a 3-jaw tool that grips from any angle. All five listings here remove filters without a shop visit.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall GEARWRENCH 3529D: 9-inch capacity with dual drive and a stated 1 year warranty. Check price on Amazon
- Best Universal WORKPRO 3-Jaw: 3-jaw grip with a magnetic head for tight spaces. Check price on Amazon
- Best for Toyota Spurtar 64mm Cap: Exact 64mm 14-flute fit in 6061-T5 aluminum. Check price on Amazon
- Best Tight Space DURATECH Swivel: 180-degree swivel with a stainless strap. Check price on Amazon
The picks
GEARWRENCH Heavy-Duty Oil Filter Strap Wrench
A GEARWRENCH heavy-duty strap wrench with 3/8 and 1/2 inch drive, filters up to 9 inches and a stated 1 year warranty.
Pros
- Up to 9 in, largest range
- 3/8 and 1/2 in drive
- 1 year warranty stated
- Forged steel handle stated
Cons
- No numbered torque stated
- Red, not for everyone
- 8.8 oz, heavier than stated
- No swivel stated
WORKPRO Universal Oil Filter Wrench Adjustable
A WORKPRO universal 3-jaw oil filter wrench with a magnetic head, covering 2-3/8 to 3-3/4 inches, in drop forged steel.
Pros
- 3-jaw universal grip
- Magnetic head stated
- Drop forged steel
- 3/8 in drive, 5/8 in wrench
Cons
- No warranty term stated
- No torque stated
- Magnetic head, small parts
- No length stated
Spurtar Oil Filter Wrench for Toyota Oil Filter
A Spurtar 64mm 14-flute aluminum cap wrench for Toyota and Lexus oil filter housings, stated at 100 N·m hand torque.
Pros
- Exact 64mm 14-flute fit
- 6061-T5 aluminum stated
- 100 N·m torque stated
- Anodized, corrosion resistant
Cons
- Fits only 64mm 14-flute
- No warranty term stated
- Hand tools only, no impact
- Single use, not universal
DURATECH Small Swivel Oil Filter Wrench
A DURATECH small swivel strap wrench with a stainless steel strap, 180-degree swivel and automatic tension, for 2-3/4 to 3-1/4 inch filters.
Pros
- 180-degree swivel stated
- Stainless strap, dimpled
- Auto tension adjustment
- Ergonomic handle stated
Cons
- No warranty term stated
- Range narrower than WORKPRO
- No torque stated
- Single tool, not a set
ValueMax Strap Wrench 2-piece
A ValueMax 2-piece strap wrench set with 4 and 6 inch rubber straps and stated 200 N and 90 N torque limits.
Pros
- 2-piece set, 4 and 6 in
- 200 N stated on large
- Rubber straps, no marring
- Nylon and TPR handles
Cons
- No warranty term stated
- 200 N limit, do not exceed
- Plastic parts stated
- Not a precision tool
More options to compare
GEARWRENCH Heavy-Duty Oil Filter Wrench 3-3/4" to 4-1/2"Check price on Amazon
Lisle 57030 Standard Oil Filter Swivel WrenchCheck price on Amazon
Lisle 63600 Car Oil Filter Wrench for 2-1/2" to 3-1/8" FiltersCheck price on Amazon
LIBRATON 2PCS Strap Wrench SetCheck price on Amazon
Compare the picks
| Factor | GEARWRENCH 3529D | WORKPRO 3-Jaw | Spurtar 64mm | DURATECH Swivel | ValueMax 2-Pc |
|---|---|---|---|---|---|
| Type | Strap | 3-jaw | Cap | Strap swivel | Strap 2-piece |
| Size range | Up to 9 in | 2-3/8 to 3-3/4 in | 64mm 14-flute | 2-3/4 to 3-1/4 in | 4 and 6 in |
| Drive | 3/8 and 1/2 in | 3/8 in, 5/8 in wrench | 3/8 in | Not stated | Not stated |
| Build | Nylon strap, steel handle | Drop forged steel | 6061-T5 aluminum | Stainless strap | Rubber strap, TPR handles |
| Torque | High torque stated | Not stated | 100 N·m stated | Not stated | 200 N and 90 N stated |
| Weight | 8.8 oz | 0.45 kg | 167 g | 0.28 kg | 0.45 kg |
| Warranty | 1 year | Not stated | Not stated | Not stated | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 20 October 2026. Only the GEARWRENCH states a warranty term.
How we scored them
Each wrench is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. The GEARWRENCH scores on performance for its 9-inch capacity and on warranty for the stated 1 year; the WORKPRO scores on performance for its 3-jaw universal grip; the Spurtar scores on build for its 6061-T5 aluminum; the DURATECH scores on performance for its swivel; the ValueMax scores on value as a 2-piece set.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| GEARWRENCH 3529D | 9.7 | 32 | 20 | 20 | n/a | 3 |
| WORKPRO 3-Jaw | 9.6 | 30 | 20 | 20 | n/a | 0 |
| Spurtar 64mm Cap | 9.6 | 30 | 20 | 19 | n/a | 0 |
| DURATECH Swivel | 9.5 | 28 | 19 | 19 | n/a | 0 |
| ValueMax 2-Pc | 9.5 | 27 | 18 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
Buying guide: best oil filter wrench under 25, what matters
Cap, strap or 3-jaw
The Spurtar is a cap wrench: a 64mm 14-flute aluminum cup that fits one Toyota and Lexus filter housing exactly, with 4 bottom slots that align with the filter cap tabs. The GEARWRENCH, ValueMax and DURATECH are strap wrenches that wrap any round filter. The WORKPRO is a 3-jaw tool that grips from 2-3/8 to 3-3/4 inches. For one car, a cap wrench fits best; for a mixed fleet, a strap or 3-jaw covers all.
Size range
The GEARWRENCH handles filters up to 9 inches, the largest range here, and is stated for high-torque truck and tractor work. The ValueMax covers 4 and 6 inches across its 2-piece set. The WORKPRO covers 2-3/8 to 3-3/4 inches; the DURATECH covers 2-3/4 to 3-1/4 inches; the Spurtar fits only the 64mm 14-flute housing. Measure your filter before buying.
Drive and torque
The GEARWRENCH works with 3/8 or 1/2 inch drive tools; the Spurtar takes a 3/8 inch drive with a stated 100 N·m hand-torque capacity; the WORKPRO takes a 3/8 inch drive or a 5/8 inch wrench. The ValueMax states 200 N maximum on the large strap and 90 N on the small, warning not to exceed them. The Spurtar warns against impact wrenches: hand tools only on the aluminum body.
Build
The Spurtar states a 6061-T5 aluminum alloy body with a black anodized finish; the GEARWRENCH states a forged steel handle with an oil-resistant nylon strap; the WORKPRO states drop forged steel jaws; the DURATECH states a stainless steel strap with a dimpled texture; the ValueMax states reinforced rubber straps with nylon and TPR handles. Metal jaws and steel straps outlast rubber for stuck filters.
Tight spaces
The DURATECH swivels 180 degrees for tight engine compartments with automatic tension adjustment; the WORKPRO states it removes tough filters in tight spaces with a magnetic head; the Spurtar states 6.4 centimeters length. For a transverse engine with the filter buried, the DURATECH’s swivel is the pick.
Warranties
Only the GEARWRENCH states a warranty: 1 year manufacturer. The other four state no warranty term. On a sub-25 tool, the build matters more than the warranty.
Torque limits the listings state
The Spurtar is the only listing that states torque figures in detail: it is for hand tools only, not impact wrenches or power tools, and it states the wrench handles approximately 100 N·m of controlled, evenly applied hand torque on removal. For installation it points to the vehicle maker’s figure, typically around 25 N·m plus or minus 5 N·m. The ValueMax states a 200 N maximum on the large strap and 90 N on the small, with a warning not to exceed them. Those are the only stated limits here; the other three listings state no torque figure, so do not invent one for them.
Weight and length
The GEARWRENCH states 8.8 oz at 32 in long, the longest stated length here, which is where its leverage comes from. The DURATECH states 0.28 kg at 8.62 in. The WORKPRO states 0.45 kg at 3.75 in. The ValueMax states 0.45 kg at 25 in. The Spurtar states 167 g. Length is leverage and reach in one number: the 32 in GEARWRENCH swings wide, the 8.62 in DURATECH fits where the others cannot.
The Spurtar spec table does not match its listing
The Spurtar’s title and bullets describe a 64mm 14-flute cap wrench for Toyota cartridge housings with a 3/8 in drive, but its spec table describes something else entirely: a swivel oil filter wrench set with a 70 to 133mm size range, ABS-plastic and carbon steel materials, and a 6.4 cm length. The title and bullets win over the spec table, so read this as the 64mm cap wrench and ignore the swivel-set figures. None of the other four listings shows a spec table this far from its own title.
Strap care from the ValueMax tips
The ValueMax listing gives use tips worth quoting: the metal buckle must be applied to the target tightly, the orange triangle plastic top must fix the black strap for the wrench to work, and oil, water or fuel must be wiped off the strap before use. A strap wrench grips by friction, so a contaminated strap slips. The GEARWRENCH states an oil-resistant nylon strap, which is the only stated answer to the same problem here.
Garage Fit Check
Match the wrench to the filter: cap wrenches need the exact diameter and flute count, strap wrenches need the diameter range. Confirm the 64mm 14-flute housing on your Toyota before buying the Spurtar. Apply force gradually on stuck filters and never use impact tools on aluminum cap wrenches.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Frequently Asked Questions
Strap or cap wrench: which is better?
A cap wrench fits one housing exactly and never slips; a strap wrench fits everything. The strap vs cap oil filter wrench comparison covers the trade-offs in detail.
What size oil filter wrench do I need?
The listings here cover 64mm cap, 2-3/4 to 3-1/4 inch, 2-3/8 to 3-3/4 inch, 4 and 6 inch, and up to 9 inch. Measure your filter diameter and buy the range that includes it.
Can I use an impact wrench on a cap wrench?
The Spurtar listing says no: hand tools only, since impact torque can damage the aluminum body and the filter cap. The same caution applies to any aluminum cap wrench.
Which of these states a warranty?
Only the GEARWRENCH, with a 1 year manufacturer warranty. The other four state no warranty term.
Related: the strap vs cap oil filter wrench comparison, the best oil extractor pump for motorcycles, the best creeper for oil changes and the best oil change kit for home mechanics.
