Best Easy Out Kit for Bolts (2026): 5 Picks for Stuck Fasteners
Five bolt extractor kits compared by piece count, extractor types, materials and storage, for rounded, rusted and damaged fasteners.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWYBENZ 46-Piece Set9.7/10View on Amazon - 2
Most PiecesVEVOR 65-Piece Set9.6/10View on Amazon - 3
Drill Bits IncludedYEKEPRO 40-Piece Set9.6/10View on Amazon - 4
Most CompactGRLCOOD 14-Piece Set9.5/10View on Amazon - 5
Bolt Extractor KitView on Amazon - 6
26Pcs Bolt Extractor KitView on Amazon - 7
72Pcs Bolt Extractor KitView on Amazon
A rounded bolt head on a brake caliper bracket can stop a Saturday brake job cold. The socket spins, the corners are gone, and the usual wrench set has nothing left to grab. That is the moment a best easy out kit for bolts earns its drawer space, with extractors shaped to bite into damaged heads and back them out.
This guide compares five extractor kits, from a 6-piece spiral set to a 65-piece kit with drill bits, by piece count, extractor types, materials and storage. The WYBENZ 46-piece set leads on coverage, while the GRLCOOD 14-piece set suits a small drawer and the VEVOR 65-piece set covers the widest spread of fastener types.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall WYBENZ 46-Piece Set: 46 pieces covering bolt, multi-spline, lug nut and spiral extractors with dual-head drill-extract tools. Check price on Amazon
- Most Pieces VEVOR 65-Piece Set: 65 pieces with nut removers, hex extractors, drill bits and spiral extractors in an organized case. Check price on Amazon
- Drill Bits Included YEKEPRO 40-Piece Set: 40 pieces with 10 left-hand cobalt drill bits plus bolt sockets and multi-spline extractors. Check price on Amazon
- Most Compact GRLCOOD 14-Piece Set: 14 pieces in a 1.57 lb palm-sized case with sizes from 1/4 inch to 3/4 inch. Check price on Amazon
Picks for the garage
46Pcs Screw Extractor Set & Impact Lug Nut
A 46-piece extractor kit with bolt extractors, multi-spline screw extractors, lug nut extractors and dual-head drill-extract tools, forged from Cr-Mo steel with an orange storage case.
Pros
- 16 bolt extractors from 1/4 inch to 3/4 inch plus 13 multi-spline extractors
- 6 dual-head tools drill a pilot hole and extract in one tool
- 4 lug nut extractors from 17 mm to 22 mm
- Forged Cr-Mo steel with 4341 HSS extractors and S2 bits
Cons
- No weight stated
- No warranty term stated
- Lug nut extractors cover 17 mm to 22 mm only
- Stripped screw extractors cover sizes 0 to 4 only
YEKEPRO 40 Pcs Broken Bolt Extractor Kit with Easy
A 40-piece kit with bolt extractor sockets, multi-spline screw extractors, left-hand cobalt drill bits and spiral screw extractors in chrome molybdenum steel.
Pros
- 15 bolt extractor sockets plus 10 multi-spline extractors
- 10 left-hand cobalt drill bits with titanium coating
- 5 spiral screw extractors for damaged screws
- Chrome molybdenum steel build for damaged fasteners
Cons
- No weight stated
- No warranty term stated
- No case or storage box described
- No size range stated for the extractor sockets
VEVOR Bolt Extractor Kit
A 65-piece extractor set with plum-style and cyclone-style nut removers, hex extractors, drill bits and spiral screw extractors in an organized case.
Pros
- 65 pieces covering nut removers, hex extractors, drill bits and spiral extractors
- Laser-etched markings for quick size identification
- Works with common hand tools and power tools
- Organized case keeps pieces ready for the next job
Cons
- 6.9 lb weight
- Case measures 17.32 by 9.84 by 2.68 inches
- No warranty term stated
- No single steel grade named, only selected steels
Bolt Extractor Kit, 14 PCS Impact Bolt & Nut
A 14-piece bolt extractor socket set with sizes from 1/4 inch to 3/4 inch, a 3/8 inch adapter and a palm-sized blow-molded case.
Pros
- 13 sockets from 1/4 inch to 3/4 inch with laser-etched sizes
- Left-hand spiral design grips broken and stuck bolts
- Works with power tools and hand tools
- 1.57 lb in a palm-sized blow-molded case
Cons
- No drill bits included
- No warranty term stated
- 14 pieces cover fewer fastener types than larger kits
- Adapter is 3/8 inch only
6PCs Damaged Screw Extractor Kits
A 6-piece spiral screw extractor set in sizes 1 to 6 for damaged, broken and rusted threaded heads and bolts, packed in a storage case.
Pros
- 6 extractors covering 4 mm to 25 mm applicable ranges
- Bearing steel with hardened surfaces
- Storage case included for carrying
- Listing gives low-speed use guidance for electric hand rotators
Cons
- No drill bits or adapters listed
- No weight stated
- No warranty term stated
- Smallest count in this group at 6 pieces
Other tools worth a look
Bolt Extractor KitCheck price on Amazon
26Pcs Bolt Extractor KitCheck price on Amazon
72Pcs Bolt Extractor KitCheck price on Amazon
Compared on paper
| Model | Shop Score | Pieces | Extractor types | Material | Case | Weight |
|---|---|---|---|---|---|---|
| WYBENZ 46-Piece Set | 9.7/10 | 46 | Bolt, multi-spline, lug nut, spiral | Cr-Mo steel, 4341 HSS, S2 bits | Orange case | Not stated |
| YEKEPRO 40-Piece Set | 9.6/10 | 40 | Bolt socket, multi-spline, spiral | Chrome molybdenum steel | Not stated | Not stated |
| VEVOR 65-Piece Set | 9.6/10 | 65 | Nut remover, hex, spiral, drill bits | Selected steels | Organized case | 6.9 lb |
| GRLCOOD 14-Piece Set | 9.5/10 | 14 | Bolt and nut remover sockets | Alloy steel | Blow-molded case | 1.57 lb |
| Zeromall 6-Piece Set | 9.4/10 | 6 | Spiral screw extractors | Bearing steel | Storage case | Not stated |
*Piece counts are as stated on each listing. Specifications are manufacturer rated, as published on each listing and collected 4 November 2026.
How the points were given
Each kit is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A kit that delivers what its listing promises for its class scores near the top of each measure, while missing specs and narrow coverage score lower.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| WYBENZ 46-Piece Set | 9.7 | 32 | 22 | 22 | n/a | 0 |
| YEKEPRO 40-Piece Set | 9.6 | 30 | 21 | 21 | n/a | 0 |
| VEVOR 65-Piece Set | 9.6 | 29 | 20 | 21 | n/a | 0 |
| GRLCOOD 14-Piece Set | 9.5 | 27 | 20 | 20 | n/a | 0 |
| Zeromall 6-Piece Set | 9.4 | 24 | 19 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
Five extractor listings were compared. Piece counts run from 6 to 65, and two listings name chrome molybdenum or Cr-Mo steel while the others name alloy steel, selected steels or bearing steel. Two listings state a weight, and none states a warranty term. Drill bits appear in three kits, and four kits list a storage case, while the YEKEPRO listing describes no case.
How to pick the best easy out kit for bolts
Match the extractor to the fastener
Bolt extractor sockets grip rounded nuts and bolts, multi-spline extractors fit stripped screw heads, and lug nut extractors fit lug nuts. The WYBENZ kit lists bolt extractors, multi-spline extractors, lug nut extractors and spiral extractors, while the GRLCOOD kit lists socket-style extractors. Check the fastener type on the job before choosing a kit.
Drill bits in the kit
Some kits include drill bits for drilling a pilot hole before extraction. The YEKEPRO kit includes 10 left-hand cobalt drill bits, the VEVOR kit includes drill bits, and the WYBENZ kit uses dual-head tools that drill and extract in one tool. A kit without drill bits pairs with a drill and bits already in the drawer.
Size range and markings
Size ranges differ: the GRLCOOD sockets run from 1/4 inch to 3/4 inch, the WYBENZ bolt extractors run from 1/4 inch to 3/4 inch with lug nut extractors from 17 mm to 22 mm, and the Zeromall extractors cover applicable ranges from 4 mm to 25 mm. Laser-etched markings on the GRLCOOD and VEVOR kits help with size identification.
Case and storage
An organized case keeps small extractors together between jobs. The WYBENZ kit comes in an orange case, the GRLCOOD kit in a blow-molded case, and the VEVOR kit in an organized case. The GRLCOOD case measures 6.57 by 3.74 by 1.57 inches, while the VEVOR case measures 17.32 by 9.84 by 2.68 inches, so drawer space differs.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Drawer space: the GRLCOOD case measures 6.57 by 3.74 by 1.57 inches, while the VEVOR case measures 17.32 by 9.84 by 2.68 inches.
- Power: the GRLCOOD kit works with power tools and hand tools, and the WYBENZ kit works with hand tools, ratchets and power drills.
- Storage: four kits list a case, so extractors stay organized between jobs.
- Before the first job: check the size range against the fasteners on the vehicle, since ranges run from 4 mm to 25 mm on the Zeromall set and from 1/4 inch to 3/4 inch on the GRLCOOD and WYBENZ bolt extractors.
FAQ: garage tools
How do you use a bolt extraction kit?
Fit the extractor over the damaged fastener and turn it in reverse so the spiral grip bites. The YEKEPRO listing advises striking the extractor with a hammer first so it grips stronger, and the WYBENZ dual-head tools drill a pilot hole with one end and extract with the other after flipping the tool. The Zeromall listing advises working at low speeds with an electric hand rotator until the screw comes out.
What sizes do these extractor kits cover?
The GRLCOOD sockets and the WYBENZ bolt extractors cover 1/4 inch to 3/4 inch, the WYBENZ lug nut extractors cover 17 mm to 22 mm, and the Zeromall extractors cover applicable ranges from 4 mm to 25 mm. Match the extractor to the fastener size before starting.
Can an extractor kit work with power tools?
Yes, on the kits that state it. The GRLCOOD kit suits power tools and hand tools, and the WYBENZ kit works with hand tools, ratchets and power drills. Use low speeds where the listing advises it, as the Zeromall listing does.
Do these kits include drill bits?
Three kits list drill bits. The YEKEPRO kit includes 10 left-hand cobalt drill bits, the VEVOR kit includes drill bits, and the WYBENZ kit uses dual-head tools that drill and extract in one tool.
Related: the best penetrating oil for rust, the best breaker bar for home mechanics, the bolt extractor vs screw extractor comparison, the best impact socket set for trucks and the engine and shop equipment hub.
