Best Transfer Punch Set for Metal (2026): 5 Picks

Compared on paper

Specifications are manufacturer rated, collected 1 November 2026. The Accusize set is the only one that states a warranty term, 30 days, and the HHIP set is the only one that states hardened ends that resist mushrooming, so those two earn the only warranty and safety points here.

How the points were given

Each set is scored on performance, build, value, safety and warranty, using only what the listing publishes. Size range and stated precision earn performance points, and hardened steel with a labeled index earns build points. A factor the listing does not state scores zero.

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

What the listings tell you

Three listings are 28-piece sized sets covering 3/32 to 1/2 by 64ths plus 17/32, and all three come in a labeled index or stand. The LLDSIMEX set is metric, 25 punches from 1 to 13 mm by 0.5 mm. The AD listing is not a sized set at all: it is a universal center aligner, sold as a set of 2, that replaces sized punches. The Accusize listing states Rc 61-63 hardness and a 30-day warranty. The HHIP listing states an undersize of 0.0025 in for a snug slip fit and hardened ends that resist mushrooming.

Buying guide: choosing the best transfer punch set for metal

Size range: fractional or metric

Three sets cover 3/32 to 1/2 by 64ths plus 17/32: HHIP, Accusize and HORUSDY. The LLDSIMEX set covers 1 to 13 mm by 0.5 mm for metric holes. The AD aligner has no sizes at all: it adapts to the hole instead of matching one punch to each size.

Precision fit

The HHIP set is the only one that states an undersize figure: each punch is undersized by 0.0025 in for a snug slip fit into drilled holes. The Accusize set states Rc 61-63 hardness. The HORUSDY, LLDSIMEX and AD listings state no undersize figure.

Length and handling

The HHIP, Accusize and LLDSIMEX punches are each 4-7/8 in long. The HORUSDY listing states no punch length. The AD aligner has a knurled body for better grip, and its sliding centre punch is struck to mark the workpiece.

Steel and finish

The HHIP punches are heat-treated and tempered carbon tool steel with a black oxide finish. The HORUSDY punches are heat treated alloy steel with a black oxide film. The LLDSIMEX punches are heat-treated tempered tool steel with an industrial black oxide finish. The Accusize listing states Rc 61-63 hardness but names no steel type for the punches. The AD aligner has a hardened guide cone and is CNC made.

Storage

The HHIP punches sit in a labeled metal index stand. The Accusize punches sit in a metal index inside a sturdy steel case. The HORUSDY punches sit in an easy-to-see index stand. The LLDSIMEX and AD listings state no storage index or case.

Garage Fit Check

Before the first job, check these points:

• The HHIP, Accusize and HORUSDY sets each hold 28 punches in a labeled index or stand, so check bench space for the stand before the first job.
• The AD listing states its aligner replaces different sized regular transfer punches, so one tool covers many hole sizes.
• The LLDSIMEX set is metric, 1 to 13 mm, so match it to metric holes.
• The HHIP listing notes transfer punches need through holes, and blind hole spotters and inserts are sold separately.
• The Accusize set is the only one with a stated warranty term, 30 days.

FAQ: garage tools

What size transfer punch set do I need for metal?

Three sets here cover 3/32 to 1/2 by 64ths plus 17/32, which suits most fractional drilled holes in the shop. The LLDSIMEX set covers 1 to 13 mm by 0.5 mm for metric holes. The AD aligner adapts to the hole instead of matching a punch to each size.

Do transfer punches need through holes?

Yes, per the HHIP listing: transfer punches need through holes, and blind hole spotters and inserts are sold separately. Check the hole before choosing the punch.

What does undersize 0.0025 in mean?

The HHIP punches are undersized by 0.0025 in, which gives a snug slip fit into drilled holes for precise center-point transfers. No other listing here states an undersize figure.

Is a universal transfer punch aligner the same as a set?

No. The AD aligner is a single tool, sold as a set of 2, that adapts to the hole with a hardened guide cone and a sliding centre punch. A sized set gives one punch for each hole size, so the punch matches the hole exactly.

Which transfer punch set has a warranty?

Only the Accusize set states one: 30 days, per its spec table. The HHIP, HORUSDY, LLDSIMEX and AD listings state no warranty term.

Related: the best punch set under 30, the best punch set for roll pins, the best punch set with tray and our engine and shop equipment hub.