Air Compressor Filter Assembly: What It Does and How to Fit One
An air compressor filter assembly cleans the air entering the pump, and fitting the right one comes down to thread size, filter size and the rating the compressor calls for.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Air Compressor Intake Filter9.6/10View on Amazon - 2
Air Compressor Air Intake Filter Elements #14 A4249.6/10View on Amazon - 3
2 Pcs 1/2" Thread Air Compressor Silencer Filter9.5/10View on Amazon - 4
VIAIR Direct Inlet Air Filter Assembly9.4/10View on Amazon
An air compressor filter assembly is the filter that sits on the intake of a compressor and cleans the air before it reaches the pump. It keeps dust and grit out of the pump and the tank, and the assembly is the filter element plus the housing or thread that holds it on the intake. This guide covers what the filter does, how to match one to a compressor, and how to fit it.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Air Compressor Intake Filter
An aftermarket intake filter with a 5 micron nominal rating and 35 CFM, sized at 4.38 inches across and 2.5 inches tall.
Pros
- 5 micron nominal rating with KS media
- 35 CFM with a 1.12 sq ft surface area
- Plastisol molded end caps, metallic inner support
- Aftermarket replacement for Solberg 15 and Ingersoll Rand
Cons
- Single filter only, no spare element in the box
- Maximum temperature rating of 150°F
- Aftermarket part rather than an OEM filter
- 2.5 inch height needs clearance above the intake

Air Compressor Air Intake Filter Elements #14 A424
A 2-pack of intake filter elements with 99% filtration efficiency, sized at 4.375 inches across and 2.3 inches tall.
Pros
- 99% filtration efficiency, heavy duty paper element
- Galvanized steel mesh for strength and protection
- 2-pack, so a spare element is in the box
- Fits Ingersoll Rand SS5, 2340 and 2475 and Solberg 14
Cons
- Elements only, no housing or thread included
- Fits only the models on the compatibility list
- 2.3 inch height must match the old element
- No warranty term is stated

2 Pcs 1/2" Thread Air Compressor Silencer Filter
A 2-pack of 1/2 inch thread silencer filters with a coated metal shell and sound-absorbing elements, plus 2 spare elements.
Pros
- Standard 1/2 inch threading for a quick, straightforward fit
- Filters moisture, dust and debris, cuts intake noise
- Coated metal shell, sound-absorbing filter elements
- 2 silencers plus 2 spare elements in the box
Cons
- Monthly replacement adds upkeep
- Only fits a matching 1/2 inch intake thread
- Check the size against your machine before ordering
- No warranty term is stated

VIAIR Direct Inlet Air Filter Assembly
A direct inlet air filter assembly with a black plastic housing and a 1/4 inch male NPT port.
Pros
- Complete assembly with housing and 1/4 inch male NPT port
- 1 year manufacturer warranty
- Direct inlet design for a simple fit at the intake
- Housing included, no separate element housing needed
Cons
- Plastic housing rather than a metal shell
- Single assembly only, no spare element in the box
- Only fits a 1/4 inch NPT intake port
- Housing is 10.0 by 6.0 by 4.0 inches, so check clearance
What an air compressor filter assembly does
The filter assembly sits at the intake and cleans the air the pump draws in. The Zizlurnar silencer filter (on Amazon) lists filtering moisture, dust and debris from intake air, and the Moisture Boss filter (on Amazon) uses KS media to filter contaminants. The housing holds the element in place at the intake port.
The ALL Tool Depot elements use a heavy duty paper element with galvanized steel mesh, and the Moisture Boss filter lists a 5 micron nominal rating and 35 CFM.
How to fit an air compressor filter assembly
Start with the thread on the compressor intake. The Zizlurnar filter uses standard 1/2 inch threading, which the maker lists for most air compressor intake ports, while the VIAIR assembly (on Amazon) uses a 1/4 inch male NPT port. Check the size that suits your machine before you order.
For a replacement element, match the outside diameter, inside diameter and height of the old one. The ALL Tool Depot elements measure 2.3 inches tall with a 4.375 inch outside diameter and a 3 inch inside diameter, and the Moisture Boss filter measures 4.38 inches across, 3 inches inside and 2.5 inches tall.
Drain the tank after use so water does not rust it from the inside, never exceed the tool's rated pressure, wear eye protection, and run 240V units on the circuit the manual calls for. Do not run a gas engine compressor in a closed garage. Read our Safety Disclaimer.
Which filter assembly fits your compressor
Match the thread, the size and the rating. The thread decides whether the assembly screws onto the intake at all, so a 1/2 inch thread filter will not fit a 1/4 inch port. The Moisture Boss lists a 5 micron nominal rating, and the ALL Tool Depot elements list 99% filtration efficiency.
Filter assemblies for the job
The fitting step needs the assembly itself: the intake filter that threads onto the port and the replacement elements that keep it working.
FAQ: garage tools
What thread size does an air compressor filter assembly use?
It depends on the compressor. The Zizlurnar filter uses standard 1/2 inch threading, and the VIAIR assembly uses a 1/4 inch male NPT port.
How often should I replace the filter element?
Zizlurnar recommends replacing the element once a month. Follow the schedule in the compressor manual.
What size replacement element fits my compressor?
Match the outside diameter, inside diameter and height of the old element. The ALL Tool Depot elements measure 2.3 inches tall, 4.375 inches across and 3 inches inside, while the Moisture Boss filter measures 4.38 inches across, 3 inches inside and 2.5 inches tall.
Can I fit a filter assembly without special tools?
Zizlurnar says its filter installs on most air compressor intake ports without special tools or professional help.
Related: air compressors, air compressor fittings types and sizes, best air compressor filter lubricator.




