Best ATV Lift Stand (2026): 5 Stands Compared
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDAYIMADE Bike Stand9.6/10View on Amazon - 2
Highest CapacityVEVOR Dirt Bike Lift9.6/10View on Amazon - 3
Lowest WeightPOLARBEAR Bike Stand9.6/10View on Amazon - 4
Widest DeckOMT Scissor Lift Jack9.6/10View on Amazon - 5
Tallest LiftTUSK Scissor Lift9.5/10View on Amazon
An oil change on a dirt bike starts with the bike in the air, and the best atv lift stand is the one that holds it there while you work. We compared 5 lift stands for dirt bikes, ATVs and motorcycles on capacity, lift height, weight, locks and warranty, using only what each Amazon listing publishes.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall DAYIMADE Bike Stand: 1-year warranty, 4 tool trays and a 1000 lb capacity Check price on Amazon
- Highest Capacity VEVOR Dirt Bike Lift: 1200 lb capacity with a hook lock and damped descent Check price on Amazon
- Lowest Weight POLARBEAR Bike Stand: 1200 lb capacity at 14.88 pounds with a damper shock Check price on Amazon
- Widest Deck OMT Scissor Lift Jack: 9.1 x 14.6 in deck with 5 locking holes and a safety bar Check price on Amazon
- Tallest Lift TUSK Scissor Lift: 13.75 to 34 in lift on casters for standing-height work Check price on Amazon
Picks for the garage
Adjustable Dirt Bike Stand with with Tool Trays
A hydraulic dirt bike stand with 4 built-in tool trays, a 1000 lb capacity and a 9.65 to 16.73 inch lift range, with a 1 year warranty stated.
Pros
- 4 built-in tool trays in the base for bolts, tools and parts
- 1 year warranty stated in the spec table
- Anti-slip rubber platform protects the bike frame
- Adjustable height from 9.65 to 16.73 inches
Cons
- 1000 lb capacity is lower than the 1200 lb stands here
- Weight is stated as 7.5 KG with no pound figure
- No safety certification stated
- No locking mechanism is stated in the listing
VEVOR Dirt Bike Lift Stand
A hydraulic dirt bike lift stand with a 1200 lb capacity, a 9.8 to 18.3 inch lift range, a hook lock and a damped descent, in heavy-duty steel.
Pros
- 1200 lb capacity, the highest here with the POLARBEAR stand
- Hook lock fixes the height for safer use
- Damped hydraulic rod gives a slow, controlled descent
- Solid steel screw rod and heavy-duty steel frame
Cons
- Title says 9.8 to 18.3 inches while the bullets say 10 to 18 inches
- No warranty stated in the listing
- No safety certification stated
- No tool tray is stated in the listing
POLARBEAR Aluminum Adjustable Dirt Bike Stand
An aluminum hydraulic dirt bike stand with a 1200 lb capacity, a 10.6 to 17.32 inch lift range and a 14.88 pound build, with a safety buckle and damper shock.
Pros
- 1200 lb capacity at 14.88 pounds, the lowest weight here
- Aviation-grade aluminum alloy platform and linkage block
- Safety buckle and damper shock for a smooth landing
- Removable rubber gasket with grooves for a stable park
Cons
- Bullets say 14.88 pounds while the spec table says 14.0 pounds
- No warranty stated in the listing
- No safety certification stated
- No tool tray is stated in the listing
OMT 1100lb Motorcycle Scissor Lift Jack Wide Deck
An 1100 lb capacity steel scissor jack with a 9.1 x 14.6 in rubber deck, 5 locking holes, safety bar and a 1 year warranty.
Pros
- 1100 lb load capacity with heavy-duty steel build
- 9.1 x 14.6 in wide deck with rubber padding
- Mechanical safety bar with 5 locking hole positions
- 1 year manufacturer warranty
Cons
- Spec table lists 13 in max rise while title and bullets state 14.6 in
- Spec table lists dimensions of 1.57 x 10.24 x 4.33 in
- Manual operation only, power tools not recommended
- No safety standard certification stated
Tusk Scissor Lift Stand
A steel scissor lift stand with casters, a 300 lb capacity and a 13.75 to 34 inch lift range, with a foot pedal and a rubber non-slip top pad.
Pros
- Tallest lift here: 13.75 to 34 inches for standing-height work
- Casters for moving the stand around the garage
- Foot pedal lift, no handle pumping
- Rubber non-slip top pad protects the frame
Cons
- 300 lb capacity is the lowest here by a wide margin
- 67.0 pounds, the heaviest stand here
- No warranty stated in the listing
- No safety certification stated
Compared on paper
| Stand | Shop Score | Capacity | Lift height | Weight | Warranty |
|---|---|---|---|---|---|
| DAYIMADE Bike Stand | 9.6/10 | 1000 lbs | 9.65 to 16.73 in | 7.5 KG | 1 Year |
| VEVOR Dirt Bike Lift | 9.6/10 | 1200 lbs | 9.8 to 18.3 in | 15.21 pounds | Not stated |
| POLARBEAR Bike Stand | 9.6/10 | 1200 lbs | 10.6 to 17.32 in | 14.88 pounds | Not stated |
| OMT Scissor Lift Jack | 9.6/10 | 1100 lb | 3.7 to 14.6 in | Not stated | Not stated |
| TUSK Scissor Lift | 9.5/10 | 300 lb | 13.75 to 34 in | 67.0 pounds | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 4 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each stand is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a safety listing such as ALI or ASME, so all score zero on safety, and only the DAYIMADE stand states a warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DAYIMADE Bike Stand | 9.6 | 29 | 20 | 20 | n/a | 2 |
| VEVOR Dirt Bike Lift | 9.6 | 30 | 21 | 21 | n/a | 0 |
| POLARBEAR Bike Stand | 9.6 | 30 | 21 | 20 | n/a | 0 |
| TUSK Scissor Lift | 9.5 | 26 | 20 | 20 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
Capacity splits this group more than anything else. The VEVOR and POLARBEAR stands list 1200 lbs, the OMT lists 1100 lb, the DAYIMADE lists 1000 lbs and the TUSK lists 300 lb. The TUSK stand is a different kind of tool: a scissor lift with casters that raises a bike to standing height, while the hydraulic stands lift from low heights for bench work. Lift height runs from 3.7 to 14.6 inches on the OMT to 13.75 to 34 inches on the TUSK, so the right stand depends on the job and the bike. Only the DAYIMADE listing states a warranty term, with 1 Year in the spec table, and none of the 5 listings states a safety listing.
How to choose the best atv lift stand
Capacity first
Match the stated capacity to the machine before anything else. A 300 lb stand suits a light dirt bike, while a 1200 lb stand covers heavier dirt bikes and ATVs. The VEVOR listing names Yamaha, Kawasaki, Honda and Suzuki dirt bikes, and the POLARBEAR and DAYIMADE listings both name ATV use. Never load a stand past the capacity its listing states. For more dirt bike options, see our best motorcycle lift stand for dirt bikes picks.
Lift height and ground clearance
Check the minimum height against your bike before you buy. The VEVOR listing says to measure the minimum ground clearance of your bike’s engine and make sure it is not less than the stand’s minimum height. The OMT lifts from 3.7 to 14.6 inches, the DAYIMADE from 9.65 to 16.73 inches, the POLARBEAR from 10.6 to 17.32 inches and the VEVOR from 9.8 to 18.3 inches. The TUSK is the outlier: it lifts from 13.75 to 34 inches, so it suits standing-height work rather than low bench work.
Locks and descent
A lift stand needs a way to stay up. The VEVOR stand has an installation hook lock to fix the height, the POLARBEAR stand has a safety buckle, and the OMT has 5 locking holes with a safety bar that drops in to hold the deck. The VEVOR and POLARBEAR stands also list a damped descent, so the bike comes down slowly instead of dropping. Never get under a vehicle supported only by a jack: use rated stands on solid, level ground, follow the owner’s manual lift points, and follow the lift maker’s concrete and ceiling requirements where they apply. Our best motorcycle lift stand roundup lists more jacks and stands.
Weight and moving it around
Stand weight matters when the stand moves between the garage and the track. The POLARBEAR stand lists 14.88 pounds, the VEVOR lists 15.21 pounds and the DAYIMADE lists 7.5 KG, while the TUSK lists 67.0 pounds but rolls on casters. The OMT listing states no weight. A light stand is easy to carry; a heavy stand with casters is easy to roll, so pick the kind of moving you actually do.
Check the lift's rated capacity against your heaviest vehicle, and its ceiling and concrete requirements (thickness and strength) before you buy. Install it exactly as the manufacturer specifies, use the mechanical locks before you go under, and look for ALI certification on the model. See the Automotive Lift Institute (ALI). Read our Safety Disclaimer.
Garage Fit Check
- Check ground clearance first: the VEVOR listing says to measure the minimum ground clearance of your bike’s engine against the stand’s minimum height.
- Match capacity to the machine: the TUSK stand is rated to 300 lb, while the VEVOR and POLARBEAR stands are rated to 1200 lbs.
- Mind the weight: the POLARBEAR stand lists 14.88 pounds and the TUSK lists 67.0 pounds.
- Store it where it fits: the tallest lift here reaches 34 inches, and the TUSK stand rolls on casters.
FAQ: garage tools
What capacity ATV lift stand do I need?
Match the stand to the machine. The stands here list 300 lb, 1000 lbs, 1100 lb and 1200 lbs. Check your bike’s weight against the stated capacity before you buy, and never load a stand past its listed capacity.
How high do these lift stands go?
The TUSK stand lifts from 13.75 to 34 inches, the VEVOR from 9.8 to 18.3 inches, the POLARBEAR from 10.6 to 17.32 inches, the DAYIMADE from 9.65 to 16.73 inches and the OMT from 3.7 to 14.6 inches.
Which stand here states a warranty?
Only the DAYIMADE stand, with 1 Year in the spec table. The other 4 listings state no warranty term.
Do any of these stands have tool storage?
The DAYIMADE stand lists 4 built-in tool trays in the base. The other listings state no tool storage.
Can I use a dirt bike stand for an ATV?
The listings name dirt bikes, ATVs and motorcycles. The POLARBEAR and DAYIMADE listings both name ATV use, so check the capacity and the platform size against your machine.
Related: the best motorcycle lift stand for dirt bikes, the best ATV and mower lift, our paddock stand vs motorcycle lift stand comparison and our car lifts hub. Also see our best ATV lift ramps and our best paddock stand for dirt bike picks.
