Best Blind Rivet Removal Tool (2026): 4 Picks Compared
Four blind rivet removal tools compared by rivet sizes, drill size, weight and warranty, from a complete EROSHAK kit to a title-only Aircraft Tool Supply pick.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Complete KitEROSHAK Rivet Remover9.5/10View on Amazon - 2
Best Single-Size RemoverSASKATE Rivet Remover9.4/10View on Amazon - 3
Best Rivet InstallerAstro Pneumatic ADR149.4/10View on Amazon - 4
Best Lightweight PickAircraft Tool Supply9.2/10View on Amazon
A rivet head sits flush against a panel that has to come off, and prying at it only tears the metal around the hole. The best blind rivet removal tool drills out just the head, so the hole stays round and the panel stays usable. This guide compares four tools that do that job with a drill, from a complete kit with guides and bits to a title-only pick with little more than a weight to go on.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Complete Kit EROSHAK Rivet Remover: Guides and bits for 5 rivet sizes, for a 1/4 in drill, in a reusable container. Check price on Amazon
- Best Single-Size Remover SASKATE Rivet Remover: Alloy steel remover with a bit for 3/16 in rivets, for a 1/4 in drill. Check price on Amazon
- Best Rivet Installer Astro Pneumatic ADR14: Converts a drill into a power pop riveter for rivets up to 1/4 in. Check price on Amazon
- Best Lightweight Pick Aircraft Tool Supply: A rivet removal tool at 0.45 lb, per the spec table. Check price on Amazon
Picks for the garage
Rivet Removal Tool,POP Rivet Drill
A drill adapter rivet remover with guides and drill bits for 5 rivet sizes, for a 1/4 in pneumatic or electric drill, in a reusable container.
Pros
- Guides and drill bits for 5 rivet sizes in one kit
- Removes only the rivet head, so the hole and metal stay intact
- Fits any 1/4 in pneumatic or electric drill
- Reusable container with a threaded lid for storage
Cons
- Drill not included
- Title lists 7/32 in while the bullets list 1/32 in
- No weight stated in the listing
- Warranty line reads 6 mouths with no clear term stated
SASKATE Blind Rivet Removal Tools
An alloy steel drill remover with a bit for 3/16 in rivets, for a 1/4 in pneumatic or electric drill.
Pros
- Alloy steel build for frequent use
- Bit included for 3/16 in rivets
- Removes only the rivet head, so holes and finish stay intact
- Fits any standard 1/4 in pneumatic or electric drill
Cons
- Covers only 3/16 in rivets, not a range of sizes
- No weight stated in the listing
- No warranty term stated
- No dimensions stated in the listing
Astro Pneumatic Tool ADR14 XL Blind Rivet Adapter
A blind rivet adapter kit that converts a cordless, pneumatic or corded drill into a power pop riveter, with nose pieces for 6 rivet sizes.
Pros
- Converts a drill into a power pop riveter
- Nose pieces for 6 rivet sizes, up to 1/4 in
- CNC machined from solid billet aluminum with Japanese bearings
- Works on rivet bodies up to 0.65 in, with a maximum stroke of 0.7 in
Cons
- Installs blind rivets rather than removing them
- No warranty term stated
- Stainless limited to 7/32 in
- Stem can stick on soft rivets without lube
Aircraft Tool Supply Rivet Removal Tool
A rivet removal tool listed with a weight and dimensions and little else.
Pros
- Lowest weight here at 0.45 lb
- Compact at 6.75 x 3.0 x 1.0 in
- One item in the box, nothing extra to sort
- Simple rivet removal tool with no extras to learn
Cons
- No rivet sizes stated in the listing
- No drill size stated in the listing
- No warranty term stated
- No material stated in the listing
Compared on paper
| Model | Shop Score | Type | Rivet sizes | Drill size | Weight | Warranty |
|---|---|---|---|---|---|---|
| EROSHAK Rivet Remover | 9.5/10 | Drill adapter remover | 1/8 to 1/4 in | 1/4 in | Not stated | Not stated |
| SASKATE Rivet Remover | 9.4/10 | Drill remover | 3/16 in | 1/4 in | Not stated | Not stated |
| Astro Pneumatic ADR14 | 9.4/10 | Blind rivet adapter kit | 3/32 to 1/4 in | Cordless, pneumatic or corded drill | 1.8 lb | Not stated |
| Aircraft Tool Supply | 9.2/10 | Rivet removal tool | Not stated | Not stated | 0.45 lb | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 1 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each tool is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a UL, ETL or CSA listing, so all score zero on safety, and none states a clear warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| EROSHAK Rivet Remover | 9.5 | 32 | 21 | 21 | 0 | 0 |
| SASKATE Rivet Remover | 9.4 | 28 | 21 | 20 | 0 | 0 |
| Astro Pneumatic ADR14 | 9.4 | 26 | 22 | 19 | 0 | 0 |
| Aircraft Tool Supply | 9.2 | 19 | 16 | 15 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
We read 4 rivet tool listings. Two are drill adapter removers, one installs blind rivets instead of removing them, and one is listed with little more than a weight and dimensions. Only 2 state a weight, and none states a clear warranty term. One listing contradicts itself on rivet sizes, with the title and the bullets giving different sizes.
Buying guide: the best blind rivet removal tool for your garage
Rivet size
Match the tool to the rivet diameter. The EROSHAK title covers 1/8, 5/32, 3/16, 7/32 and 1/4 in rivets, though the bullets list 1/32 in instead of 7/32 in. The Astro kit includes nose pieces for 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4 in rivets, and the SASKATE covers 3/16 in rivets only. The Aircraft Tool Supply listing states no rivet sizes, so check the listing before buying.
Removal or installation
Three of these tools remove rivets by drilling out the head. The Astro kit does the opposite job: it turns a drill into a power pop riveter that sets blind rivets. If you need to take rivets out, pick a remover; if you need to set them, the Astro kit is the one here that does it. For the difference between blind rivets and rivet nuts, see our blind rivet vs rivet nut guide.
Drill size and depth control
The EROSHAK and SASKATE removers attach to a 1/4 in pneumatic or electric drill, and the Astro kit works with a cordless, pneumatic or corded drill. Both removers work by adjusting the drill depth so only the rivet head comes off, which is what keeps the hole round. Cobalt and high speed bits fit the EROSHAK guides, and the SASKATE bit suits 3/16 in rivets.
Weight and storage
The Aircraft Tool Supply tool weighs 0.45 lb and the Astro kit weighs 1.8 lb, while the EROSHAK and SASKATE listings state no weight. The EROSHAK kit packs into a reusable container with a threaded lid, so the guides and bits stay together between jobs.
Garage Fit Check
- Check the rivet diameter against the guides or nose pieces before the first job.
- Have a 1/4 in pneumatic or electric drill ready for the EROSHAK and SASKATE removers.
- Keep the EROSHAK kit in its reusable container so the guides and bits stay together.
- Use spray lube on soft rivets with the Astro kit, and clean debris often.
Wear eye protection with every air tool, use impact-rated sockets on impact wrenches, disconnect the air line before changing accessories, and finish lug nuts with a torque wrench to the vehicle's spec. See OSHA eye and face protection. Read our Safety Disclaimer.
FAQ: garage tools
How to use blind rivets?
Blind rivets are set with a rivet tool that pulls the stem through the rivet body. The Astro kit turns a drill into a power pop riveter for that job, with nose pieces for 3/32 to 1/4 in rivets. To take a blind rivet out, drill out only the head with a remover like the EROSHAK or SASKATE.
Are blind rivets waterproof?
The listings here do not state whether blind rivets are waterproof. If water matters for the job, check the rivet listing itself for a waterproof claim before buying.
How to use a blind rivet gun?
Fit the nose piece that matches the rivet size. The Astro kit turns a drill into a power pop riveter, and the listing says to use spray lube to prevent jamming on soft rivets, clean debris often, and move to the next size up nosepiece if the stem keeps sticking.
How to measure blind rivets?
Measure the rivet diameter, then match it to the tool. The EROSHAK kit covers 1/8 to 1/4 in rivets, the Astro kit includes nose pieces for 3/32 to 1/4 in rivets, and the SASKATE bit suits 3/16 in rivets.
How are blind rivets installed?
A blind rivet is set by pulling its stem through the body with a rivet tool. The Astro kit does this from a drill, with nose pieces for 3/32 to 1/4 in rivets, a maximum stroke of 0.7 in, and room for rivet bodies up to 0.65 in.
Related: the blind rivet vs rivet nut guide, the pneumatic rivet gun vs rivet nut gun comparison, the electric vs pneumatic rivet gun guide, the cobalt vs HSS drill bits guide and our air tools hub.
