Best Double Straight Hooks for Pegboard (2026): 5 Compared

Tools buried in a drawer are tools you never reach for, and the best double straight hooks for pegboard are the hooks that hold two tools on one peg and keep them where you can see them. A double arm hook spreads the load across two arms, and a vinyl or rubber tip keeps the tool from sliding off. This guide compares the hook sets in the list by pack size, length, load and stated warranty, using only what each listing states.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	INCLY 36 Pack 4/6 Inch Double Arm Pegboard Hooks	9.7/10	Buy on Amazon
2	Nlmyt 10 Pcs Pegboard Hooks	9.6/10	Buy on Amazon
3	HUHOLE 8 Pack 4 Inch Double Arm Pegboard Hooks	9.5/10	Buy on Amazon
4	16 Pcs Peg Hooks for Pegboard	9.5/10	Buy on Amazon
5	Double Arm Metal Pegboard Hooks 10 Pack	9.5/10	Buy on Amazon

1

INCLY 36 Pack 4/6 Inch Double Arm Pegboard Hooks

INCLY·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

36 pack of double arm pegboard hooks in 4 and 6 inch sizes, in hardened steel, with a 40 lb stated load and rubber tips.

Check price on Amazon

Pros

• 36 hooks, 18 in 4 inch and 18 in 6 inch
• Load bearing up to 40 lbs
• Hardened steel, rust-resistant and corrosion-resistant
• Rubber tips for protection

Cons

• No warranty term is stated
• No vinyl coating is stated
• No hook above 6 inches is in the pack
• Only 2 sizes in the pack

2

Nlmyt 10 Pcs Pegboard Hooks

Nlmyt·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10 pack of 6 inch double pegboard hooks with a wider 1.33 inch double arm spacing, in galvanized metal, with a 20 lb stated load.

Check price on Amazon

Pros

• 6 inch hooks, the longest here
• Wider double arm spacing of 1.33 inches
• Galvanized, anti-corrosion and anti-rust
• Rubber tipped hooks support 20 lbs

Cons

• No warranty term is stated
• Only 10 hooks in the pack
• No hook below 6 inches is in the pack
• No vinyl coating is stated

3

HUHOLE 8 Pack 4 Inch Double Arm Pegboard Hooks

HUHOLE·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

8 pack of 4 inch double arm pegboard hooks in steel, vinyl coated, for 1/4 inch pegboard, with a 30 lb stated load.

Check price on Amazon

Pros

• Stated load of 30 lbs
• Vinyl coated finish reduces scratches and improves grip
• Double arm design for balanced support
• Fits 1/4 inch pegboards with 1 inch spacing

Cons

• No warranty term is stated
• Only 8 hooks in the pack
• Only 4 inch hooks in the pack
• No rubber tips are stated

4

16 Pcs Peg Hooks for Pegboard

JOUTYFOR·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

16 pack of 4 inch double pegboard hooks with a wider 1.33 inch double arm spacing, in galvanized metal, with a 20 lb stated load.

Check price on Amazon

Pros

• 16 hooks in the pack
• Wider double arm spacing of 1.33 inches
• Double arm diameter of 0.2 inches
• Galvanized, anti-corrosion and rust-proof

Cons

• No warranty term is stated
• Only 4 inch hooks in the pack
• No 6 inch size is in the pack
• No vinyl coating is stated

5

Double Arm Metal Pegboard Hooks 10 Pack

Generic·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10 pack of 3.74 inch double arm metal pegboard hooks with a galvanized finish, rubber tips and a J-shape, for 3/16 to 1/4 inch holes.

Check price on Amazon

Pros

• Rubber tips prevent slipping and scratches
• J-shape with 1 inch depth locks tools in place
• Fits 3/16 inch to 1/4 inch diameter holes
• Tool-free installation, easy to remove or reposition

Cons

• No warranty term is stated
• No load figure is stated in the listing
• Only 3.74 inch hooks in the pack
• No pack above 10 is offered

Compared on paper

Specs such as CFM, PSI and torque are the manufacturer’s ratings as listed, collected 1 November 2026. None of these hook sets states a warranty term.

How the points were given

Each hook set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For pegboard hooks, safety points come from stated rubber or vinyl tips and rust-proof finishes.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.

What the listings tell you

We read 5 double straight hook sets for this guide. None stated a warranty term, and all 5 fit 1/4 inch pegboard holes. The INCLY set is the largest at 36 hooks in 4 and 6 inch sizes, and the HUHOLE set is the smallest at 8 hooks. The INCLY set has the highest stated load at 40 lbs, and the Generic set states no load figure.

How to choose the best double straight hooks for pegboard

Pack size and length

Pick a pack that covers the tools on the wall. The INCLY set has 36 hooks in 4 and 6 inch sizes, with 18 hooks of each size. The JOUTYFOR set has 16 hooks at 4 inches, and the Nlmyt and Generic sets have 10 hooks each. The Nlmyt hooks are 6 inches long, and the Generic hooks are 3.74 inches long.

Load

Check the stated load before hanging heavy tools. The INCLY hooks support up to 40 lbs, the HUHOLE hooks support up to 30 lbs, and the Nlmyt and JOUTYFOR hooks support 20 lbs. The Generic listing states no load figure, so check the listing before hanging heavy tools.

Pegboard fit

All 5 sets here fit 1/4 inch pegboard holes. The HUHOLE hooks fit 1/4 inch pegboards with 1 inch spacing, and the INCLY and Nlmyt hooks fit 1/4 inch holes with 2 inch spacing. The Generic hooks fit 3/16 inch to 1/4 inch diameter holes, and the JOUTYFOR hooks fit 1/4 inch pegboard holes.

Tips and finish

Rubber or vinyl tips keep tools from sliding off and scratching. The HUHOLE hooks have a vinyl coated finish, and the INCLY, Nlmyt, Generic and JOUTYFOR hooks have rubber tips. The INCLY hooks are hardened steel, rust-resistant and corrosion-resistant, and the Nlmyt, Generic and JOUTYFOR hooks have a galvanized finish.

Warranty

None of the hook sets in this guide states a warranty term. The listings state no warranty term, so check the listing for support notes before ordering.

For the rest of the wall, see our best pegboard hooks small set and best metal pegboard tool storage.

Garage Fit Check

• Check the hole size first: all 5 sets here fit 1/4 inch pegboard holes.
• Check the spacing: the HUHOLE hooks fit 1 inch spacing, and the INCLY hooks fit 2 inch spacing.
• The INCLY hooks support up to 40 lbs, per the listing.
• The Generic hooks fit 3/16 inch to 1/4 inch diameter holes, per the listing.
• Keep the old hook for size comparison until the new hook is fitted.

FAQ: garage tools

What are double straight hooks for pegboard?

A double straight hook has two straight arms that hold tools on a pegboard. The sets here have double arm designs for balanced support, and the HUHOLE listing states the double arm structure offers balanced support for frequently used tools.

What size pegboard hooks do I need?

Match the hook to the pegboard hole and the tool. All 5 sets here fit 1/4 inch pegboard holes. The INCLY set has 4 and 6 inch hooks, the Nlmyt hooks are 6 inches long, and the HUHOLE and JOUTYFOR hooks are 4 inches long.

How much weight can a pegboard hook hold?

It depends on the hook. The INCLY hooks support up to 40 lbs, the HUHOLE hooks support up to 30 lbs, and the Nlmyt and JOUTYFOR hooks support 20 lbs. The Generic listing states no load figure.

Do pegboard hooks need screws?

None of the sets here states screws are needed. The Generic listing states no extra tools are required for installation, with a press to fix and easy removal. The hooks fit 1/4 inch pegboard holes.

Are pegboard hooks metal or plastic?

The sets here are metal. The INCLY hooks are hardened steel, and the Nlmyt, Generic and JOUTYFOR hooks have a galvanized finish. The HUHOLE hooks are steel hangers with a vinyl coated finish.

More garage guides

More from the tool storage shelf: pegboard vs slatwall, tool storage, best tool storage for shed.