Best Heat Resistant Welding Gloves (2026): 4 Leather Pairs Compared

Compared on paper

Specifications are manufacturer rated, as published on each listing and collected 11 November 2026. Where a listing contradicts itself, both figures are shown.

How the points were given

Each pair is scored out of 10 on performance, build, value, safety and warranty, using the weights published on the How We Pick page. None of the four listings states a safety certification, so every pair scores zero on safety, and only one gives a clear warranty term.

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.

What the listings tell you

Four welding glove listings were compared. All four stated a length and a heat rating, though one listing gave two different ratings. Three stated a leather thickness, two stated a foil layer, and only one stated a clear warranty term. None stated a safety certification.

How to pick the best heat resistant welding gloves

Length and cuff coverage

Three of the pairs here are 16 inches long, and the fourth is 23.6 inches long. The 16-inch pairs cover the hands, wrists and forearms, and the TICONN pair adds a 7.5-inch cuff with an adjustable elastic band at the opening, while the ARCCAPTAIN pair has a 7-inch sleeve. Measure the cuff against your forearm and sleeve before the first job, and pick the longer pair when sparks and hot debris reach past the wrist.

Heat rating and layers

Heat ratings here run from 662°F to 1000°F. The TICONN pair is rated to 1000°F with three layers: a 2.4 mm cowhide outer, a foil middle layer and a flame-retardant cotton lining. The VCLPOWER pair is rated to 932°F with a foil layer under the palm and fingers, and the ARCCAPTAIN pair is rated to 662°F with a multi-layer build. The MOUTCLMB pair needs a second look: the title says 932°F while the bullets say 662°F, so the listing gives both figures.

Leather and stitching

Leather thickness runs from 1.2 mm on the VCLPOWER pair to 2.4 mm on the TICONN pair, with the MOUTCLMB pair at 1.5 mm. The VCLPOWER and TICONN pairs use Kevlar stitching or Kevlar thread at the seams and stress points, and the ARCCAPTAIN pair uses reinforced double stitching with extra leather protection. A double-layer palm shows up on three of the pairs here, which matters because the palm takes the most wear from gripping hot metal.

Lining and comfort

Every pair here has a cotton lining: the VCLPOWER pair uses a cotton liner, the TICONN pair uses a flame-retardant cotton inner layer, the ARCCAPTAIN pair uses a soft insulated cotton lining with a denim cotton-lined cuff, and the MOUTCLMB pair uses a cotton lining with sweat absorption. The TICONN pair adds an adjustable elastic band at the opening to stop the glove slipping, and the ARCCAPTAIN pair uses a straight thumb design for dexterity.

Fit and sizing

Sizes stated are 16-inch L on the VCLPOWER and TICONN pairs and Large on the MOUTCLMB pair, while the ARCCAPTAIN pair is listed in Black-Red, L. Check the size field on the listing before ordering, since none of the listings states a size chart or a range of sizes.

Garage Fit Check

• Length: three pairs are 16 inches long and one is 23.6 inches, so check which cuff length fits your arms and sleeves before the first job.
• Heat rating: ratings run from 662°F to 1000°F across these picks, so match the rating to the welding you plan to do.
• Storage: all four pairs have a leather outer and a cotton lining, so give them a dry spot on the shelf away from grinding dust and sparks.
• Fit: sizes listed are 16-inch L and Large, so check the size field on the listing before ordering.
• Warranty: only one pair states a clear warranty term, a 2-year warranty, so note which pairs carry no stated term.

FAQ: garage tools

How do you use welding gloves?

Put the gloves on before striking an arc or handling hot metal, and wear them for MIG, Stick, TIG and Flux-Core welding, as well as forge work. The long cuff covers the wrists and forearms, so pull the cuff over the sleeve and check that it stays in place before the first bead.

What do welding gloves protect you from?

Welding gloves protect the hands, wrists and forearms from welding sparks, hot debris, embers, radiant heat and molten metal splatter. The double-layer palm and the leather outer also guard against abrasion from rough surfaces and grinding debris.

What material are welding gloves made from?

The pairs here are made from cowhide leather, with thicknesses from 1.2 mm to 2.4 mm where the listing states one. Two pairs add an insulating aluminum foil middle layer, and every pair has a cotton lining, with Kevlar stitching or Kevlar thread at the seams and stress points.

Can welding gloves get wet?

None of the four listings states whether the gloves can get wet, and none gives care instructions for wet gloves. The listings describe a cowhide leather outer with a cotton lining, so check the listing before using a wet pair for hot work.

How are welding gloves made?

The pairs here are built in layers: a cowhide leather outer, an aluminum foil middle layer on two of the pairs, and a cotton lining inside. The palm gets a second layer of cowhide on three of the pairs, the thumb crotch is strengthened with thickened cowhide on the VCLPOWER pair, and the seams use Kevlar stitching or Kevlar thread.

Related: our engine and shop equipment hub, the best MIG welder for home garage and the best leather welding gloves. Also see our flux core welding tips and best welding magnets for body panels.