Best Impact Driver (2026): 5 Drivers Compared
Five cordless impact drivers compared by torque, speed, battery, kit contents and warranty, using only stated specs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGoYwato 21V Brushless9.7/10View on Amazon - 2
Best QuietDEWALT DCF870B9.5/10View on Amazon - 3
Best CompactMilwaukee 2953-209.5/10View on Amazon - 4
Best Kit ValueCRAFTSMAN CMCF801D19.4/10View on Amazon - 5
Best M18 FuelMilwaukee M18 Fuel9.4/10View on Amazon
A rusted screw that will not budge with a hand driver is the moment a garage needs an impact driver, and the best impact driver is the tool with enough torque for the fastener and a battery that lasts the job. This guide compares cordless impact drivers by torque, speed, battery, kit contents and warranty, using only what each maker publishes. The picks below run from a full kit with spare batteries to a quiet hydraulic driver for indoor work.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall GoYwato 21V Brushless: 2655 in-lbs, 2 batteries, 14 sockets, 10 bits Check price on Amazon
- Best Quiet DEWALT DCF870B: Hydraulic, 57% quieter, 3-year warranty Check price on Amazon
- Best Compact Milwaukee 2953-20: 2000 in-lbs, 3,900 RPM, 4.47 in, 2.2 lb Check price on Amazon
- Best Kit Value CRAFTSMAN CMCF801D1: 1800 in-lbs, battery and charger included Check price on Amazon
- Best M18 Fuel Milwaukee M18 Fuel: 2000 in-lbs, Tri-LED, 4-mode control Check price on Amazon
Picks for the garage

GoYwato 2655In-lbs 21V Brushless 1/4" Cordless
A 21V brushless impact driver kit with 2655 in-lbs of torque, 2 4.0Ah batteries, a charger, 14 sockets and 10 bits in a case.
Pros
- 2655 in-lbs of max torque, the highest here
- 2 4.0Ah batteries and a charger for extended runtime
- 14 sockets and 10 screwdriver bits in a storage case
- 75A over-current, 230A short-circuit and 70°C high-temperature protections
Cons
- Weighs 3.62 pounds, the heaviest here
- No RPM figure is stated, so speed cannot be compared
- 1-year warranty, shorter than the DEWALT 3-year term
- Reverse auto-stop must be switched on with the yellow button

DEWALT 20V MAX 1/4 Inch Hydraulic Impact Driver
A 20V MAX hydraulic impact driver listed at up to 57% quieter operation, with 9 LEDs, a 20-minute work light and a 3-year limited warranty.
Pros
- Hydraulic drive at up to 57% quieter operation
- Up to 40% faster driving for large screws
- 9 LEDs with a 20-minute work light mode
- 3-year limited warranty is stated
Cons
- No torque figure is stated
- Battery is not included
- No RPM figure is stated
- No weight is stated

Milwaukee 2953-20 18V Cordless 1/4" Hex Impact
An 18V cordless 1/4-inch hex impact driver with 2000 in-lbs of torque, 3,900 RPM and Tri-LED lights, tool only.
Pros
- 2000 in-lbs of torque with 3,900 RPM
- Tri-LED lights for workspace visibility
- 4-mode drive control
- 4.47 inches long and 2.2 pounds
Cons
- Tool only, with no battery or charger included
- No warranty term is stated
- No quick-release chuck is stated
- No case is stated

CRAFTSMAN Cordless 1/4 Impact Driver with 2 Ah
A 20V cordless 1/4-inch impact driver with 1800 in-lbs of torque, 2900 RPM and a 2Ah battery, charger and PH2 bit in the box.
Pros
- 2Ah battery, charger and PH2 bit included
- Up to 120 fasteners per charge
- 1800 in-lbs of max torque for deck screws and lag bolts
- Variable speed trigger with up to 2900 RPM
Cons
- No warranty term is stated
- 1800 in-lbs is the lowest torque here
- No socket set is stated
- VERSATRACK clips and accessories are sold separately

Milwaukee Electric - M18 Fuel. 1/4 HEX Impact
An M18 Fuel 1/4-inch hex impact driver with 2000 in-lbs of torque, Tri-LED lighting and 4-mode drive control.
Pros
- 2000 in-lbs of torque
- Great trigger control for smooth acceleration on small fasteners
- Tri-LED lighting for workspace visibility
- 4-mode drive control
Cons
- No RPM figure is stated
- No battery is stated
- No charger is stated
- No case is stated
Other tools worth a look
DEWALT Screwdriver Bit SetCheck price on Amazon
CRAFTSMAN Hand Impact DriverCheck price on Amazon
SWANLAKE 20PCS Power Nut Driver Set for Impact DrillCheck price on Amazon
Custom Leathercraft CLC 5021 Impact Driver HolsterCheck price on Amazon
HORUSDY 22-Piece Power Nut Driver Set for Impact DrillCheck price on Amazon
Compared on paper
| Driver | Shop Score | Torque | Speed | Battery | Warranty |
|---|---|---|---|---|---|
| GoYwato 21V Brushless | 9.7/10 | 2655 in-lbs | Not stated | 2 x 4.0Ah included | 1-year |
| DEWALT DCF870B | 9.5/10 | Not stated | Not stated | Not included | 3-year limited |
| Milwaukee 2953-20 | 9.5/10 | 2000 in-lbs | 3,900 RPM | Tool only | Not stated |
| CRAFTSMAN CMCF801D1 | 9.4/10 | 1800 in-lbs | 2900 RPM | 2Ah included | Not stated |
| Milwaukee M18 Fuel | 9.4/10 | 2000 in-lbs | Not stated | Not stated | Not stated |
We copy each listing’s rated specs exactly as the manufacturer gives them; as of 14 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each driver is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For impact drivers, safety means stated battery protections. Only the GoYwato states battery safety protections, so it alone scores above zero on safety, and two give a clear warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| GoYwato 21V Brushless | 9.7 | 33 | 22 | 22 | 7 | 2 |
| DEWALT DCF870B | 9.5 | 28 | 21 | 20 | 0 | 3 |
| Milwaukee 2953-20 | 9.5 | 30 | 21 | 19 | 0 | 0 |
| CRAFTSMAN CMCF801D1 | 9.4 | 28 | 20 | 21 | 0 | 0 |
| Milwaukee M18 Fuel | 9.4 | 29 | 20 | 19 | 0 | 0 |
The displayed number is the weighted point total scaled linearly between 9.2 and 9.8. Earning more points is the only way up.
What the listings tell you
We compared five impact driver listings. Four state a torque figure, from 1800 to 2655 in-lbs, while the DEWALT hydraulic model states none. Two give a speed in RPM, and two include a battery in the box. Two state a clear warranty term, and one states battery safety protections.
How to choose the best impact driver
Torque and speed
Start with torque. The GoYwato lists 2655 in-lbs, the two Milwaukee models list 2000 in-lbs each, and the CRAFTSMAN lists 1800 in-lbs. The DEWALT hydraulic model states no torque figure, so its power cannot be compared on that number. For speed, the Milwaukee 2953-20 lists 3,900 RPM and the CRAFTSMAN lists 2900 RPM, while the other three state no RPM figure. Match the torque to the fastener: lag bolts and rusted screws need the higher figures, while small screws suit the lower speeds.
Battery or tool only
Check the box before you order. The CRAFTSMAN includes a 2Ah battery and charger, and the GoYwato includes 2 4.0Ah batteries and a charger. The Milwaukee 2953-20 is tool only, the DEWALT battery is not included, and the M18 Fuel listing states no battery. A spare battery keeps the job going while the other charges, so a kit with two batteries suits long jobs. See best cordless combo kit for mechanics for a full cordless set.
Kit contents
The GoYwato kit lists 14 sockets, 10 screwdriver bits and a storage case, and the CRAFTSMAN includes a PH2 bit. The other three state no bits or sockets in the box. A belt hook comes with the DEWALT, and a metal belt clip with the Milwaukee 2953-20. If you need sockets for the driver, see best socket adapter set for drill.
Noise and light
The DEWALT hydraulic model runs at up to 57% quieter operation, and the GoYwato brushless motor operates quietly. For light, the DEWALT has 9 LEDs with a 20-minute work light mode, the Milwaukee models have Tri-LED lights, and the CRAFTSMAN and GoYwato each have a bright LED. Light matters in a dim corner of the garage, so check the LED count before ordering.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Check what comes in the box before the job: the CRAFTSMAN includes a 2Ah battery, charger and PH2 bit, and the GoYwato includes 2 4.0Ah batteries, a charger, 14 sockets, 10 bits and a case.
- The Milwaukee 2953-20 measures 4.47 inches long and weighs 2.2 pounds, so it fits where a longer driver cannot reach.
- Keep the GoYwato case on the shelf with the 14 sockets and 10 bits inside, so the set stays together.
- Charge the GoYwato batteries with the included charger before the job, and keep the spare charged while you work.
FAQ: garage tools
What torque should an impact driver have?
Torque here runs from 1800 to 2655 in-lbs. The GoYwato lists 2655 in-lbs, the two Milwaukee models list 2000 in-lbs, and the CRAFTSMAN lists 1800 in-lbs. The DEWALT hydraulic model states no torque figure.
Do these impact drivers come with a battery?
The CRAFTSMAN includes a 2Ah battery and charger, and the GoYwato includes 2 4.0Ah batteries and a charger. The Milwaukee 2953-20 and the DEWALT are tool only, and the M18 Fuel listing states no battery.
Which impact driver makes the least noise?
The DEWALT hydraulic model runs at up to 57% quieter operation. The GoYwato brushless motor is also described as running quietly.
What comes in the GoYwato kit?
The kit lists 1 driver, 2 4.0Ah batteries, 1 charger, a 14-piece socket set, 10 screwdriver bits, a carrying case and a user manual.
Which impact driver has a warranty?
The DEWALT states a 3-year limited warranty, and the GoYwato states a 1-year warranty. The other three state no clear warranty term.
Related: the mid torque vs high torque impact wrench, the best cordless combo kit for mechanics, our drills and drivers hub and our power tools hub. Also see our best small cordless electric screwdriver. Also see our best socket adapter set for drill. Also see our drill bit size guide.




