Best Oil Transfer Pump (2026): 5 Pumps Compared
Five oil transfer pumps, manual and battery powered, compared by flow rate, lift, hose reach and warranty.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Best battery pickDEWALT DCE050B9.5/10View on Amazon - 2
Best M18 pickMilwaukee 2771-209.4/10View on Amazon - 3
Best manual siphonSMART JERRY Siphon Pump9.4/10View on Amazon - 4
Best bottle pumpJewheg Quart Bottle Pump9.3/10View on Amazon - 5
TIGEROAR Oil Transfer Pump 110V Electric Fuel Transfer PumpView on Amazon - 6
Diesel Transfer Pump 110V 20GPM Oil Transfer PumpView on Amazon - 7
Fluid Pump for Quart BottlesView on Amazon - 8
Slippery Pete Fluid Pump for Gallon Bottles and Wide MouthView on Amazon - 9
Amarine Made Oil PumpView on Amazon
Drain plug out, oil draining, and then the awkward part: getting the old oil from the drain pan into jugs without painting the garage floor. A funnel works until the pan is wider than the funnel, and then it does not. The best oil transfer pump skips the funnel entirely, moving used oil, gear lube or transmission fluid from one container to another with a squeeze, a crank or a battery.
Five pumps made this list: two battery powered workhorses and three manual pumps, from a quart-bottle pump to a siphon kit with long hoses. Here is what each listing actually states, scored on performance, build, value, safety and warranty, so you can match the pump to the fluid and the job.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best battery pick DEWALT DCE050B: 20V pump moving up to 10 gpm with a 25 foot lift, self-priming with an LED power switch. Check price on Amazon
- Best M18 pick Milwaukee 2771-20: 18V M18 pump with 8 gpm flow and an 18 foot lift for water treatment and maintenance. Check price on Amazon
- Best manual siphon SMART JERRY Siphon Pump: Hand siphon moving 2.9 to 3.2 gallons per minute through two 52 inch hoses, with a 180 day warranty. Check price on Amazon
- Best bottle pump Jewheg Quart Bottle Pump: Quart-bottle pump with 8cc per stroke and a 3rd hand adapter for gear oil and transmission fluid. Check price on Amazon
The picks
DEWALT 20V MAX Transfer Pump, 10 GPM
A 20V MAX battery transfer pump moving up to 10 gpm with a 25 foot lift, self-priming with an LED-embedded power switch, sold as a bare tool; headline figures are stated with tap water.
Pros
- Up to 10 gpm with a 25 foot lift (figures stated with tap water)
- Self-priming pump with LED-embedded power switch
- Moves up to 300 gallons and 4.5 gpm at 45 feet of head
- Tool Connect tag ready for asset tracking
Cons
- Sold as a bare tool; 20V battery is separate
- Headline figures are stated with tap water, not oil
- No warranty term is stated
- 16.19 x 6.69 x 9.82 in, the largest pump here
Milwaukee 2771-20 M18 Transfer Pump Brand
An 18V M18 battery transfer pump with 8 gpm flow and an 18 foot maximum lift, running on M18 REDLITHIUM battery packs for water treatment and maintenance work.
Pros
- 8 gpm flow with an 18 foot maximum lift
- Runs on M18 REDLITHIUM battery packs
- Battery powered with no cords or manual pumping
- Compact plastic housing for jobsite use
Cons
- No warranty term is stated
- Listing gives both 1 pound and 8.8 lb for weight
- Flow figure has no stated fluid
- Battery packs are separate from the pump listing
Manual Fuel Transfer Pump
A manual hand siphon pump moving 2.9 to 3.2 gallons per minute through two 52 inch hoses, handling gasoline, motor oil, transmission fluid, water and coolant, with a stated 180 day warranty.
Pros
- 2.9 to 3.2 gallons per minute by hand pumping or siphoning
- Two 52 inch hoses reach deep tanks and barrels
- Handles gasoline, motor oil, transmission fluid, water and coolant
- 180 day warranty, the only stated term here
Cons
- Manual operation is slower than battery pumps
- No lift height is stated
- 0.5 kg of plastic; no metal parts stated
- Air inflation adapter adds parts to keep track of
HORUSDY Multi-Use Siphon Fuel Transfer Pump Kit
A manual 3-in-1 siphon pump kit moving up to 3 gallons per minute, for transfer, evacuation and inflation, in a compact 9.9 x 2.1 x 9 inch plastic body that disassembles without tools.
Pros
- Up to 3 gallons per minute for fueling small tanks
- 3-in-1: transfer, evacuation and inflation
- Disassembles without tools for easy cleaning
- Compact 9.9 x 2.1 x 9 inch plastic body
Cons
- Warranty field reads 1 with no usable unit
- No lift height is stated
- Manual operation is slower than battery pumps
- 0.25 inch barb fittings are small for thick oil
Fluid Pump for Standard Quart Bottles， 8cc Per
A manual pump that threads onto standard quart bottles with a 28mm cap, moving 8cc per stroke with a 3rd hand adapter that holds the fill tube in place for gear oil and transmission fluid.
Pros
- Threads onto standard quart bottles with a 28mm cap
- 8cc per pump stroke for measured fills
- 3rd hand adapter holds the fill tube while pumping
- Suits gear oil, transmission fluid and engine oil
Cons
- No warranty term is stated
- Quart-bottle format limits volume per fill
- No lift height is stated
- 19.6 in long; needs clearance above the bottle
More options to compare
TIGEROAR Oil Transfer Pump 110V Electric Fuel Transfer PumpCheck price on Amazon
Diesel Transfer Pump 110V 20GPM Oil Transfer PumpCheck price on Amazon
Fluid Pump for Quart BottlesCheck price on Amazon
Slippery Pete Fluid Pump for Gallon Bottles and Wide MouthCheck price on Amazon
Amarine Made Oil PumpCheck price on Amazon
Compare the picks
| Model | Shop Score | Type | Flow | Warranty |
|---|---|---|---|---|
| DEWALT DCE050B | 9.5/10 | Battery, 20V | 10 gpm (tap water) | Not stated |
| Milwaukee 2771-20 | 9.4/10 | Battery, 18V | 8 gpm | Not stated |
| SMART JERRY Siphon Pump | 9.4/10 | Manual siphon | 2.9-3.2 gpm | 180 days (listed) |
| HORUSDY Siphon Pump Kit | 9.3/10 | Manual siphon | 3 gal/min | Not stated |
| Jewheg Quart Bottle Pump | 9.3/10 | Manual, quart bottle | 8cc per stroke | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 22 October 2026. Where a listing contradicts itself, both figures are shown.
How we scored them
Each pump is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a UL, ETL or CSA listing, so all score zero on safety, and only the SMART JERRY states a warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DEWALT DCE050B | 9.5 | 32 | 21 | 19 | 0 | 0 |
| Milwaukee 2771-20 | 9.4 | 29 | 21 | 19 | 0 | 0 |
| SMART JERRY Siphon Pump | 9.4 | 26 | 19 | 19 | 0 | 1 |
| HORUSDY Siphon Pump Kit | 9.3 | 24 | 18 | 19 | 0 | 0 |
| Jewheg Quart Bottle Pump | 9.3 | 23 | 18 | 19 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
Best oil transfer pump: what the listings tell you
We read five pump listings. Two are battery powered, at 20V and 18V, with stated flow rates of 10 and 8 gpm; three are manual, moving roughly 3 gallons per minute by hand or 8cc per stroke from a quart bottle. Only one states a warranty term, none states a safety listing, and one listing contradicts itself on weight. The battery listings frame their headline figures around tap water, so read those numbers as water performance, not oil performance, and the manual listings name oil directly.
Buying guide: moving oil and fluids
Manual or battery
A manual pump is the simple answer: no charging, no cords, nothing to fail but your forearm. The SMART JERRY and HORUSDY are hand siphon pumps that move just under or about 3 gallons per minute, and the Jewheg threads onto a quart bottle and moves 8cc per stroke. A battery pump is the fast answer: the DEWALT moves up to 10 gpm and the Milwaukee 8 gpm, both figures stated with water. Pick manual for occasional oil changes and top-offs; pick battery when you move large volumes or do it every weekend.
Flow rate and lift
Flow rate is how fast the fluid moves; lift is how high the pump can push it. The DEWALT lists up to 10 gpm with a 25 foot lift, plus 4.5 gpm at 45 feet of head, and the Milwaukee lists 8 gpm with an 18 foot lift. The manual pumps state no lift height at all, which makes sense: a siphon works by gravity and hand pressure, not by pushing a column of fluid uphill. Match the pump to the job: draining a pan into a jug on the floor needs flow, while filling a tall storage tank needs lift.
Hoses, bottles and reach
The fluid has to get from here to there, and the hose is what does it. The SMART JERRY ships two 52 inch flexible tubes for reaching deep into tanks and barrels, and its quick connect fittings come apart without tools. The HORUSDY is a compact 9.9 x 2.1 x 9 inch unit with barb fittings at 0.25 inches. The Jewheg takes a different approach entirely: it threads onto a standard quart bottle with a 28mm cap, and a butterfly adapter holds the fill tube in the hole like a third hand while you pump. Measure your reach before you buy, not after.
What fluids each pump handles
Not every pump likes every fluid. The SMART JERRY lists gasoline, motor oil, transmission fluid, water and coolant; the HORUSDY lists gas, oil and liquids generally; the Jewheg lists engine oil, transmission fluid, gear lube, kerosene and even shampoo. The DEWALT listing frames its work around a 60 percent water and 40 percent propylene glycol mixture for HVAC, and the Milwaukee around water treatment and maintenance. If your job is used motor oil, the manual pumps name it outright; the battery pumps state their figures with water, so treat oil as the harder case.
Batteries, bare tools and warranties
Read the power fine print. The DEWALT is sold as a bare tool, so the 20V battery comes separately, and it is Tool Connect tag ready for asset tracking. The Milwaukee runs on M18 REDLITHIUM battery packs. The manual pumps need no power at all, which is their own kind of reliability. On warranties, only the SMART JERRY states a term, 180 days; the HORUSDY warranty field reads 1 with no unit, which is not a usable term, and the other three state nothing. For fuel-specific jobs, see our best fuel transfer pump guide.
Oil vs water ratings
Pump makers state flow with thin fluids, and the listings here prove it: the DEWALT’s 10 gpm and the Milwaukee’s 8 gpm sit beside water treatment and HVAC applications, not crankcase drains. Oil is thicker than water, and cold oil thicker still, so a pump’s water figure is the optimistic end of its range. The manual pumps dodge this problem by naming oil outright: the SMART JERRY lists motor oil and transmission fluid, the HORUSDY lists oil, and the Jewheg is built around gear lube. When a listing gives no oil figure, assume the real oil flow lands below the headline number and size the job accordingly.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- The battery pumps are the big ones: 16.19 x 6.69 x 9.82 in for the DEWALT and about 15 x 7 x 8 in for the Milwaukee. The manual pumps fit in a drawer.
- Battery pumps need their platform: 20V MAX for the DEWALT (bare tool, battery separate), M18 REDLITHIUM packs for the Milwaukee.
- Check hose reach before the first job: the SMART JERRY ships two 52 inch tubes; the others state no hose length.
- Match the fluid to the listing: the manual pumps name motor oil and transmission fluid; the battery pumps state their figures with water.
Frequently Asked Questions
What is a transfer pump?
A pump that moves liquid from one container to another: out of a drain pan into a jug, out of a tank into a machine. Manual versions use hand pumping or siphoning; battery versions use a motor, like the 20V DEWALT and the 18V Milwaukee here.
What does a fuel transfer pump do?
It moves fuel between tanks and machines without pouring. The HORUSDY and SMART JERRY listings both name gasoline among their compatible fluids, alongside oil, transmission fluid, water and coolant.
How do I clean an oil transfer pump?
The HORUSDY listing says its pump disassembles without tools for easy cleaning. The SMART JERRY notes simple regular maintenance for long service life. Flush with the next fluid or a compatible cleaner, and let the pump dry before storage.
Can a manual siphon pump move motor oil?
Yes, per the listings: the SMART JERRY names motor oil and transmission fluid among its compatible fluids, and the HORUSDY lists oil generally. Thick cold oil moves slower than warm oil, so work with the fluid at room temperature when you can.
Do the battery pumps include a battery?
The DEWALT DCE050B is sold as a bare tool, so the 20V battery is separate. The Milwaukee 2771-20 runs on M18 REDLITHIUM battery packs, which the listing names as its compatible power source.
Related: the best fuel transfer pump, the best oil extractor pump for transmission fluid, the best oil extractor pump for cars, our engine and shop equipment hub and the best garage floor mat for workshop.
