Best Open End Ratcheting Wrench Set (2026): 4 Sets Compared
Four open end ratcheting wrench sets, from 6 to 22 pieces, compared on sizes, teeth, swing arc, flex heads and storage, with the listings as stated.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Largest SetDISEN 22-Piece Set9.7/10View on Amazon - 2
Best Flex-HeadAnbull 10-Piece SAE Set9.6/10View on Amazon - 3
Best Quick-SlideWORKPRO 8-Piece Set9.6/10View on Amazon - 4
Best Tubing WrenchDURATECH 6-Piece Set9.5/10View on Amazon
A bolt buried behind a bracket in the engine bay is the job that shows what a ratcheting wrench is for: a standard wrench has to come off and go back on for every turn, while a ratcheting wrench keeps turning. This best open end ratcheting wrench set roundup covers four sets, from 6 to 22 pieces, and compares them on sizes, teeth, swing arc, flex heads and storage.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Largest Set DISEN 22-Piece Set: 22 pieces in metric and SAE, with 72 teeth and a 5-degree swing arc. Check price on Amazon
- Best Flex-Head Anbull 10-Piece SAE Set: 180-degree flex head with an open end, in 10 SAE sizes with a storage box. Check price on Amazon
- Best Quick-Slide WORKPRO 8-Piece Set: Quick-Slide open end with 72 teeth and a 5-degree swing arc, in 8 metric sizes. Check price on Amazon
- Best Tubing Wrench DURATECH 6-Piece Set: Open flex-head tubing wrench in 6 metric sizes with a storage bag. Check price on Amazon
Picks for the garage
DISEN 22 PCS Ratcheting Wrenches Set
A 22-piece set with metric and SAE sizes, a 72-tooth ratchet, a 12-point box end and an organizer bag.
Pros
- 22 pieces: 11 metric sizes and 11 SAE sizes
- 72-tooth ratchet with a 5-degree swing arc
- 12-point full-drive box end for a firmer grip
- Open end and box end on each wrench
Cons
- No flex head, fixed head only
- Metric range has gaps between sizes
- No warranty term is stated
- No weight is stated
10PCS SAE Flex-Head Ratcheting Wrench Set
A 10-piece SAE set with a 180-degree open flex-head, a 72-tooth ratchet and a storage box.
Pros
- 180-degree pivoting flex head with an open end
- 10 SAE sizes from 5/16 to 3/4 in
- 72-tooth ratchet with a 5-degree swing arc
- Rugged organizer storage box included
Cons
- SAE only, no metric sizes
- 10 pieces cover fewer sizes than the 22-piece DISEN set
- No warranty term is stated
- No weight is stated
WORKPRO 8-piece Anti-Slip Ratcheting Wrench Set
An 8-piece metric set with a Quick-Slide open end, a 72-tooth ratchet, anti-slip grip and a roll-up pouch.
Pros
- Quick-Slide open end keeps turning without repositioning
- 72-tooth ratchet with a 5-degree swing arc
- Anti-slip design grips fasteners securely
- Hardness up to HRC 50, rust-resistant coating
Cons
- Metric only, no SAE sizes
- No flex head, fixed head only
- No warranty term is stated
- No weight is stated
DURATECH 6-Piece Ratcheting Wrench Set with Open
A 6-piece metric set with an open flex-head tubing wrench, a 72-tooth ratchet and a storage bag.
Pros
- 180-degree rotating head with an open end
- Open-end tubing wrench for narrow spaces
- 72-tooth ratchet with a 5-degree swing arc
- Storage bag for easy carrying and hanging
Cons
- Only 6 sizes, the smallest set here
- Metric only, no SAE sizes
- Rotating head is carbon steel, while the wrench is chrome vanadium
- No warranty term is stated
Compared on paper
| Model | Shop Score | Pieces | Sizes | Teeth | Swing arc | Head | Storage |
|---|---|---|---|---|---|---|---|
| DISEN 22-Piece Set | 9.7/10 | 22 | Metric 6-18 mm, SAE 1/4-3/4 in | 72 | 5 degrees | Open end and box end | Organizer bag |
| Anbull 10-Piece SAE Set | 9.6/10 | 10 | SAE 5/16-3/4 in | 72 | 5 degrees | 180-degree open flex-head | Storage box |
| WORKPRO 8-Piece Set | 9.6/10 | 8 | Metric 8-17 mm | 72 | 5 degrees | Quick-Slide open end | Roll-up pouch |
| DURATECH 6-Piece Set | 9.5/10 | 6 | Metric 10-17 mm | 72 | 5 degrees | 180-degree open flex-head | Storage bag |
Specifications are manufacturer rated, as published on each listing and collected 5 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each set is scored on performance, build, value, safety and warranty. None of the 4 listings states a safety listing or a warranty term, so all score zero on safety and warranty.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DISEN 22-Piece Set | 9.7 | 32 | 21 | 22 | n/a | 0 |
| Anbull 10-Piece SAE Set | 9.6 | 30 | 21 | 20 | n/a | 0 |
| WORKPRO 8-Piece Set | 9.6 | 29 | 21 | 20 | n/a | 0 |
| DURATECH 6-Piece Set | 9.5 | 27 | 20 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
The 4 listings in this roundup all state a 72-tooth ratchet and a 5-degree swing arc. The Anbull and DURATECH sets state a 180-degree flex head. None states a warranty term, and none states a safety listing.
Buying guide: best open end ratcheting wrench set
Open end vs box end
The open end slides onto a fastener from the side, which is how these sets reach nuts on lines and studs where a ring end cannot pass over the top. The box end, or the ratcheting ring end, grips all around the fastener for the turning work. Every set here has an open end; the DISEN set pairs it with a 12-point box end on each wrench. For line work, see the crowfoot vs flare nut wrench comparison.
Teeth and swing arc
All 4 sets here list a 72-tooth ratchet with a 5-degree swing arc, so the wrench only needs a small swing to catch the next tooth in a tight spot. A smaller swing arc matters most in an engine bay or behind a bracket, where a full swing will not fit.
Flex head or fixed head
The Anbull and DURATECH sets list a 180-degree flex head that pivots around obstacles, while the WORKPRO and DISEN sets list a fixed head. A flex head reaches bolts at an angle; a fixed head keeps the wrench straight. If most of your work is at an angle, see the best long flex head ratcheting wrench set.
Metric, SAE or both
The WORKPRO and DURATECH sets are metric only, the Anbull set is SAE only, and the DISEN set covers both metric and SAE. Match the set to the fasteners on your cars: metric for most imports and newer cars, SAE for older American cars. For a set that covers both, see the best ratcheting wrench set SAE and metric.
Storage
The Anbull set comes with a storage box, the WORKPRO set with a roll-up pouch, and the DURATECH and DISEN sets with a storage bag. A box stacks on a shelf, a pouch rolls up in a drawer, and a bag hangs on a hook.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Count your fasteners first: the DISEN set covers metric 6 to 18 mm and SAE 1/4 to 3/4 in, while the WORKPRO set covers metric 8 to 17 mm.
- Check the swing room: all 4 sets list a 5-degree swing arc, so they work in tight spots.
- Pick the head for the job: the Anbull and DURATECH sets list a 180-degree flex head for bolts at an angle.
- Plan storage: a box for the Anbull set, a roll-up pouch for the WORKPRO set, and a bag for the DURATECH and DISEN sets.
FAQ: garage tools
What is an open end ratcheting wrench?
A wrench with an open end on one side and a ratcheting end on the other, so the open end slides onto a fastener from the side and the ratchet end turns it without lifting off. All 4 sets here have an open end.
What does a 72-tooth ratchet mean?
The ratchet gear has 72 teeth, so the wrench only needs a 5-degree swing arc to catch the next tooth. All 4 sets here list a 72-tooth ratchet with a 5-degree swing arc.
Do I need a flex-head wrench?
A flex head pivots to reach bolts at an angle or around obstacles. The Anbull and DURATECH sets list a 180-degree flex head; the WORKPRO and DISEN sets list a fixed head.
Which set covers both metric and SAE?
The DISEN set, with 11 metric sizes from 6 to 18 mm and 11 SAE sizes from 1/4 to 3/4 in. The WORKPRO and DURATECH sets are metric only, and the Anbull set is SAE only.
Do any of these sets state a warranty?
No. None of the 4 listings states a warranty term.
Related: best large ratcheting wrench set, best flex ratchet wrench set, best metric ratchet wrench set, best ratchet line wrench set and the engine and shop equipment hub.
