Best Oscillating Multi Tool Plunge Cut Blade (2026): 5 Compared

A door jamb needs undercutting for new flooring and the gap sits too tight for a handsaw. The multi tool is already in hand, but the blade on it is a sanding pad, and the jamb will not wait. That is the moment a best oscillating multi tool plunge cut blade earns its place in the toolbox: a blade that plunges straight into wood, cuts flush to a surface, and fits the tool on the bench.

This roundup compares 5 plunge cut blades by blade count, material, cutting range, reach, Starlock fit and warranty, using only what each listing states. The sets run from 3 blades to 15 blades, and 1 of the 5 is a carbide Starlock blade.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	BOSCH OSL114C-3 3-Pack 1-1/4 In. Starlock	9.7/10	Buy on Amazon
2	LEILUO 7Pcs Oscillating Tool Blades for Wood	9.6/10	Buy on Amazon
3	LEILUO 15Pcs Oscillating Tool Blades Wood	9.6/10	Buy on Amazon
4	EZARC Titanium Oscillating Saw Blades	9.6/10	Buy on Amazon
5	EZARC Japanese Teeth Oscillating Saw Blades 5-Pack	9.5/10	Buy on Amazon

1

BOSCH OSL114C-3 3-Pack 1-1/4 In. Starlock

Bosch·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 1-1/4 in Starlock carbide plunge cut blades for iron bar, metal, wood with nails, drywall and tile.

Check price on Amazon

Pros

• Carbide construction with up to 30X longer life than standard bi-metal blades
• Starlock interface for maximum torque transfer
• No-touch blade change with snap-in function
• Laser-etched markings and color-coded interfaces

Cons

• Spec table lists 1 item while the title and bullets list 3 blades
• Warranty states only See Manufacturer's Website
• No UL or ETL listing is stated
• 1-1/4 in blade suits precise cuts, not deep cuts

2

LEILUO 7Pcs Oscillating Tool Blades for Wood

LEILUO·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-piece set with 44 mm, 55 mm and 70 mm blades, including a 55 mm titanium blade for wood with nails, with 3 C-clip adapters.

Check price on Amazon

Pros

• 70 mm reach for deep cuts in thick wood
• Titanium blade for wood with nails and soft metals
• 3 C-clip adapters for Dremel and Einhell
• 44 mm blades for quick surface cuts

Cons

• Not compatible with Starlock interface systems
• Titanium blade is not for hardened steel bolts or screws
• No warranty term is stated
• No UL or ETL listing is stated

3

LEILUO 15Pcs Oscillating Tool Blades Wood

LEILUO·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece set of identical CRV blades with double-row Japanese teeth for wood and plastic, with C-clip adapters for Dremel tools.

Check price on Amazon

Pros

• 15 identical blades, so a fresh blade is always ready
• Double-row Japanese teeth for fast, clean cuts
• Deep plunge cuts and flush cuts in wood and plastic
• C-clip adapters included for Dremel tools

Cons

• Wood and plastic only, not for nails or metal screws
• Not compatible with Starlock, Starlock Plus or Starlock Max
• No warranty term is stated
• No UL or ETL listing is stated

4

EZARC Titanium Oscillating Saw Blades

EZARC·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 2-3/4 in extra-long titanium coated blades for metal, wood with nails, screws, plastic and steel profiles.

Check price on Amazon

Pros

• 2-3/4 in extra-long blade for deep cuts
• Titanium coated teeth for heat resistance and long life
• Cuts metal, wood with nails, screws and steel profiles
• Extra reach for plunge cuts in tight spaces

Cons

• Only 3 blades in the pack
• Not recommended for Starlock interface system
• No warranty term is stated
• No UL or ETL listing is stated

5

EZARC Japanese Teeth Oscillating Saw Blades 5-Pack

EZARC·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-pack of arc edge blades with triple ground Japanese teeth for clean plunge cuts in wood and plastic.

Check price on Amazon

Pros

• Triple ground Japanese teeth for a clean surface
• Arc edge design reduces vibration
• Double-row teeth for fast cutting with less jamming
• Universal interface for most oscillating tools

Cons

• Wood and plastic only, no metal cutting stated
• Incompatible with Starlock interface system
• No warranty term is stated
• No UL or ETL listing is stated

Compared on paper

Specs such as CFM, PSI and torque are the manufacturer’s ratings as listed, collected 5 November 2026. Where a listing contradicts itself, both figures are shown.

How the picks were scored

Each blade is scored on performance, build, value, safety and warranty, with performance weighted most, then build and value, then safety and warranty. None states a UL, ETL or CSA listing, so no blade earns safety points, and no blade states a warranty term.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score. Only powered tools, or tools with stated safety features, get safety points. Everything else is rated out of 90.

What the listings tell you

5 blade listings were read for this roundup. All 5 state a blade count, from 3 blades to 15 blades. Japanese teeth are stated on 3 listings, titanium on 2 listings and carbide on 1 listing. A reach is stated on 3 listings, 2-3/4 in, 70 mm and 1-1/4 in, and a warranty term is stated on no listing. Starlock fit is stated on 1 blade, and the other 4 state they are not compatible with Starlock or not recommended for it.

Buying guide: the best oscillating multi tool plunge cut blade

Blade material

Japanese teeth cut wood and plastic cleanly, titanium coated teeth add heat resistance and life for metal and nails, and carbide cuts iron bar, metal, wood with nails, drywall and tile. The EZARC 5-pack and the LEILUO 15-piece and 7-piece sets list Japanese teeth, the EZARC titanium set and the LEILUO 7-piece set list titanium, and the Bosch lists carbide. Match the material to the cut: wood and plastic take Japanese teeth, nails and metal take titanium or carbide.

Reach and blade length

Reach sets how deep the blade cuts. The EZARC titanium blade is 2-3/4 in extra-long for deep cuts, the LEILUO 7-piece set lists blades to 70 mm, and the Bosch blade is 1-1/4 in for precise cutting. The LEILUO 7-piece set lists 44 mm blades for surface work, 55 mm and 70 mm blades for thick beams and deep gaps, and a 55 mm titanium blade for wood with nails. Pick the reach the cut needs: a long blade for deep cuts, a short blade for surface work.

Starlock or universal fit

Fit decides whether the blade mounts on the tool. The Bosch blade is a Starlock blade, and it fits Starlock tools and OIS compatible tools. The other 4 state they are not compatible with Starlock or not recommended for it, and they list a universal interface instead. The LEILUO sets include C-clip adapters for Dremel tools, and the LEILUO 7-piece set includes 3 extra C-clip adapters for Dremel and Einhell. Check the interface on the tool before ordering.

Nails and metal

Nails change the blade. The LEILUO 15-piece set is built for wood and plastics only, and the listing says not to use it on hidden iron nails or metal screws. The LEILUO 7-piece set lists a titanium blade for wood with nails, and the EZARC titanium set lists metal, wood with nails, screws and steel profiles. The Bosch carbide blade lists iron bar, metal and wood with nails. Check the listing for nails before the first cut.

Garage Fit Check

• Space: blades run from 1-1/4 in to 2-3/4 in, so measure the cut depth and the gap before choosing.
• Power: these are oscillating tool blades, so pair them with an oscillating multi tool that matches the interface.
• Storage: the sets run from 3 blades to 15 blades, so keep spares in the case or the pack between jobs.
• Check: confirm the interface, the material and the cutting range on the listing before the first job, and note that no blade states a warranty term.

FAQ: garage tools

What is an oscillating multi tool good for?

Plunge cuts in wood, flush cuts and recesses. The listings here name plunge cutting in wood for a ventilation grille, cutting a recess in furniture components, flush cutting dowels and tenons to length, undercutting door jambs and cutting under a kick plate for new flooring.

Is an oscillating multi tool a Dremel?

No. Dremel is one brand of oscillating tool, and the LEILUO blades list C-clip adapters for Dremel tools. The LEILUO 7-piece set includes 3 extra C-clip adapters for Dremel and Einhell, and the LEILUO 15-piece set includes C-clip adapters for Dremel tools.

Can these blades cut metal?

Some can. The Bosch carbide blade lists iron bar and metal, and the EZARC titanium set lists metal, wood with nails, screws and steel profiles. The LEILUO 15-piece set is wood and plastic only, and the listing says not to use it on hidden iron nails or metal screws.

Do these blades fit Starlock tools?

Only the Bosch blade is a Starlock blade. The EZARC 5-pack, the LEILUO 15-piece set and the LEILUO 7-piece set state they are not compatible with Starlock, and the EZARC titanium set states it is not recommended for Starlock.

Do any of these blades state a warranty?

No blade here states a warranty term. The Bosch listing states only See Manufacturer’s Website for warranty, which is not a term. Compare the blades on material, cutting range, reach and fit instead.

Related: the cordless tools hub, the best oscillating multi tool, the best oscillating multi tool blades for cutting metal and the best oscillating tool blades.