Best Oscillating Multi Tool Scraper Blade (2026): 4 Sets Compared

The old paint on the garage floor comes off in flakes, and the caulk around the window frame has gone hard and cracked. A putty knife takes that job flake by flake, and the best oscillating multi tool scraper blade for the job is a rigid steel edge that holds its shape under pressure. We compared scraper blade sets by piece count, blade widths, material, fit and warranty.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Oscillating Tool Scraper Blades Set	9.5/10	Buy on Amazon
2	LEILUO 10Pcs Oscillating Tool Scraper Blades	9.5/10	Buy on Amazon
3	AMZWEI 8PCS Oscillating Tool Scraper Blades	9.5/10	Buy on Amazon
4	XXGO 4 Pcs Rigid Multi Tool Scraper Blades	9.4/10	Buy on Amazon

1

Oscillating Tool Scraper Blades Set

HEMUNC·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-piece stainless steel set with 10 rigid scraper blades and 2 flexible blades for tile adhesive, paint, floor coatings, caulk and stickers.

Check price on Amazon

Pros

• 12 pieces give the most blades in this roundup, with 10 rigid and 2 flexible.
• Stainless steel construction for smooth scraping and reliability.
• Fits Fein Multimaster, Ryobi, Milwaukee, Ridgid, Dewalt and more with a universal mount.
• Names the models that need an adapter: Bosch MX30E, Dremel MM40/45 and Fein-Supercut.

Cons

• No warranty term is stated.
• Not suitable for Black and Decker-Matrix, Bosch Starlock, Craftsman Bolt-on or Fein Starlock.
• No blade widths are stated for the rigid or flexible blades.
• Only 2 of the 12 blades are flexible, so flush work draws on a small share of the set.

2

LEILUO 10Pcs Oscillating Tool Scraper Blades

LEILUO·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-piece set with 8 rigid spring steel blades and 2 flexible-edge blades for paint, caulk, adhesive and mortar on floors and walls.

Check price on Amazon

Pros

• 8 rigid blades plus 2 flexible-edge blades cover hardened debris and flush cleaning in a set.
• Rigid blades are high-strength spring steel; flexible blades are high-tensile spring steel.
• Quick-release interface mounts to DeWalt, Milwaukee, Makita and Ryobi.
• Includes C-clip adapters for Dremel tools.

Cons

• No warranty term is stated.
• Not compatible with Starlock interfaces from Bosch and Fein.
• No blade widths are stated.
• Only 2 flexible blades for flush work on tile and glass.

3

AMZWEI 8PCS Oscillating Tool Scraper Blades

AMZWEI·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece high carbon steel set in 1.2 in and 1.5 in widths for tile adhesive, paint, floor coatings, dried caulk and stickers.

Check price on Amazon

Pros

• Blade widths of 1.2 in and 1.5 in suit narrow and wider scraping.
• High carbon steel resists bending and wear, per the listing.
• 8 pieces give 4 of each width, so a worn blade has a spare in the same size.
• Fits Dewalt, Milwaukee, Fein and Worx and most standard quick-change systems.

Cons

• No warranty term is stated.
• Not compatible with Starlock or Starlock Plus systems.
• No rigid or flexible split is stated; the listing gives sizes only.
• Plastic and drywall cutting is listed only as a pinch use.

4

XXGO 4 Pcs Rigid Multi Tool Scraper Blades

XXGO·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece stainless steel set with 2 in rigid scraper blades and 4 in cutting blades for caulk, paint, tile adhesive and flooring.

Check price on Amazon

Pros

• 2 in rigid blades suit corners and tight areas.
• 4 in cutting blades add a tapered edge for cutting work.
• Stainless steel blades with a quick-release universal fit.
• Clear safety guidance in the listing: the blades are very sharp, so wear cut-proof gloves and tough boots.

Cons

• No warranty term is stated.
• The fit and not-fit lists name the same brands, Bosch, Fein, Makita and Dewalt among them, so fit is unclear.
• Only 4 pieces, the smallest set here, with 2 of them cutting blades rather than scrapers.
• Dremel MM30/35/40/45/50 need an adapter, per the listing.

Compared on paper

Every rating comes from the brand’s listing and is not a shop test (gathered 4 November 2026). Where a listing contradicts itself, both figures are shown.

How the points were given

Each blade set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None of the 4 sets states a warranty term, and only the XXGO set states safety guidance.

No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total.

What the listings tell you

We read 4 scraper blade listings. All 4 state a piece count and a blade material, and all 4 name the brands they fit and the brands they do not fit. None states a warranty term, and none states a safety listing. The XXGO set mixes rigid scraper blades with cutting blades, and its fit and not-fit lists name the same brands.

Buying guide: the best oscillating multi tool scraper blade

Rigid or flexible

Rigid blades hold their shape against hardened debris. The LEILUO set combines 8 rigid blades with 2 flexible-edge blades, and the HEMUNC set combines 10 rigid blades with 2 flexible blades. The flexible edge glides flat along tile and glass for soft caulk, silicone and stickers, while the rigid edge strips dried tile adhesive, hardened linoleum glue, old paint and mortar residue. Pick the mix that matches the surface in front of you.

Blade widths and piece counts

The AMZWEI set comes in 1.2 in and 1.5 in widths, 4 blades of each, while the XXGO set combines 2 in rigid blades with 4 in cutting blades. The HEMUNC set holds 12 pieces and the LEILUO set 10, so the bigger sets cover more blades for the same job. Match the width to the edge you need to clear.

Fit: check the mount before you buy

All 4 sets use a universal quick-release or quick-change mount, but none fits every tool. Starlock mounts are out for the LEILUO, AMZWEI and HEMUNC sets, and Starlock Plus is out for the AMZWEI set. Dremel tools need an adapter on the LEILUO, XXGO and HEMUNC sets. The XXGO fit and not-fit lists name the same brands, so read both lists on that listing before you buy. See our best oscillating multi tool and best oscillating tool blades guides for tools and blades.

What the blades clear

Tile adhesive, paint and caulk appear on all 4 listings. The LEILUO rigid blades also clear hardened linoleum glue and mortar residue, and the AMZWEI blades cut plastic and drywall in a pinch. The XXGO set adds carpet, vinyl flooring, foam glue, stucco and glaze to its list.

Garage Fit Check

• Check the mount: Starlock tools need a different blade set, and Dremel tools need an adapter on the LEILUO, XXGO and HEMUNC sets.
• Count the blades: the sets hold 12, 10, 8 and 4 pieces, so pick the count that matches the job.
• Measure the edge: the AMZWEI blades run 1.2 in and 1.5 in, and the XXGO blades run 2 in and 4 in.
• Mind the sharp edge: the XXGO listing warns the blades are very sharp and says to wear cut-proof gloves and tough boots.
• Check the flexible count: only the LEILUO and HEMUNC sets include flexible blades, 2 in each set.

FAQ: garage tools

What does an oscillating multi tool do?

It drives a blade in a rapid oscillating motion for scraping and cutting. With a scraper blade fitted, it strips paint, adhesive, caulk and coatings from floors and walls.

How do I change an oscillating multi tool blade?

Use the quick-release or quick-change mount on the tool: release the old blade, seat the new blade on the mount and lock it in place. Check the mount type first, since Starlock mounts need a different blade and Dremel tools need an adapter on some sets.

What is the difference between a rigid and a flexible scraper blade?

A rigid blade holds its shape against hardened debris such as dried tile adhesive and mortar, while a flexible blade bends slightly to glide flat along tile and glass for soft caulk and stickers. The LEILUO and HEMUNC sets include both types, 8 rigid and 2 flexible in the LEILUO set and 10 rigid and 2 flexible in the HEMUNC set.

Will these scraper blades fit my oscillating tool?

Check the mount. The LEILUO, AMZWEI and HEMUNC sets do not fit Starlock mounts, and Dremel tools need an adapter on the LEILUO, XXGO and HEMUNC sets. The XXGO fit and not-fit lists name the same brands, so read both lists before you buy.

What can I scrape off with these blades?

Tile adhesive, paint and caulk are the common jobs across the sets. The LEILUO rigid blades also clear hardened linoleum glue and mortar residue, and the XXGO set lists carpet, vinyl flooring, foam glue, stucco and glaze.

Related: the best oscillating multi tool for home mechanics, the best corded oscillating tool and the best floor scraper tool.

Also see our best oscillating multi tool blades for cutting metal, best floor paint scraper and best adhesive remover with scraper tool.