Best Portable Band Saw Blade for Stainless Steel (2026)

A stainless exhaust hanger needs shortening, or a stainless bracket needs trimming to fit, and the angle grinder throws sparks and heat across the garage. Best portable band saw blade for stainless steel cuts that same piece cleanly, with the saw doing the work while the blade holds its edge. This guide compares five portable band saw blades on length, tooth count, tooth material and whether the listing names stainless steel at all.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	LENOX Tools Portable Band Saw Blades	9.7/10	Buy on Amazon
2	Imachinist S44781214SS 44-7/8" x 1/2" x 14TPI	9.6/10	Buy on Amazon
3	FOXBC 44-7/8 inch Portable Bandsaw Blades 14 TPI	9.6/10	Buy on Amazon
4	DEWALT Portable Band Saw Blade, 32-7/8-Inch	9.6/10	Buy on Amazon
5	FOXBC 35-3/8 Inch Bandsaw Blade 24 TPI	9.6/10	Buy on Amazon

1

LENOX Tools Portable Band Saw Blades

Lenox·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 14 TPI portable band saw blade in a 5-pack, with high speed steel teeth, a shatter resistant bi-metal body and a Tuff Tooth design.

Check price on Amazon

Pros

• 14 TPI suits a wide range of metal stock
• 5-pack keeps spares on hand
• Shatter resistant bi-metal bends instead of snapping
• Tuff Tooth design reinforces the tooth for longer blade life

Cons

• Spec table gives package dimensions, not blade size
• No thickness range for stock is stated
• No warranty term is stated
• No safety listing is stated

2

Imachinist S44781214SS 44-7/8" x 1/2" x 14TPI

Imachinist·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 44-7/8 inch by 1/2 inch M42 bi-metal blades at 14 TPI, the only listing here that names stainless steel, with a stated speed range of 100 FPM to 300 FPM.

Check price on Amazon

Pros

• 14 TPI constant tooth profile, stated for stainless steel
• M42 bi-metal tooth edge with 8% cobalt
• Recommended blade speed of 100 FPM to 300 FPM for ferrous metals
• Spring steel backer and a near invisible welded joint

Cons

• No warranty term is stated
• Spec table says 1 item while the title says 3-pack
• Not recommended for non-ferrous metal
• No weight is stated

3

FOXBC 44-7/8 inch Portable Bandsaw Blades 14 TPI

FOXBC·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-pack of 44-7/8 inch by 1/2 inch M42 bi-metal blades at 14 TPI, stated for material from 5/16 inch to 1/2 inch thick, with a wide fit list across Milwaukee, DeWalt, Makita, Bosch and Wen saws.

Check price on Amazon

Pros

• 5-pack, the largest pack here with the Lenox
• M42 bi-metal high speed steel with heat resistance
• Fits Milwaukee M18 FUEL and corded saws, plus Bosch, DeWalt, Makita and Wen models
• Stated for material from 5/16 inch to 1/2 inch thick

Cons

• No warranty term is stated
• The listing does not name stainless steel
• No weight is stated
• No tooth hardness figure is stated

4

DEWALT Portable Band Saw Blade, 32-7/8-Inch

DEWALT·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 32-7/8 inch DEWALT portable band saw blades at 18 TPI, with a Matrix II high speed steel edge, 8% cobalt and Rc 65-67 tooth hardness.

Check price on Amazon

Pros

• Matrix II high speed steel edge for heat and wear resistance
• 8% cobalt content for added durability and wear
• Rc 65-67 tooth hardness
• Alloy steel backer for fatigue resistance

Cons

• No warranty term is stated
• The listing does not name stainless steel
• Spec table says 1 item while the title says 3-pack
• Width is not stated in the title or bullets

5

FOXBC 35-3/8 Inch Bandsaw Blade 24 TPI

FOXBC·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 35-3/8 inch by 1/2 inch M42 bi-metal blades at 24 TPI with a hook tooth profile, for the Milwaukee 2829-20 compact portable band saw.

Check price on Amazon

Pros

• 24 TPI hook tooth profile for fine, intricate shapes
• M42 bi-metal high speed steel with heat resistance
• Precision-sharpened teeth for easy cutting
• Sized for the Milwaukee 2829-20 compact portable band saw

Cons

• No warranty term is stated
• The listing does not name stainless steel
• No blade speed is stated
• Fits a compact saw, not the full-size 44-7/8 inch saws

Compared on paper

Every rating comes from the brand’s listing and is not a shop test (gathered 11 November 2026). Length is the stated blade length; TPI is teeth per inch.

How the points were given

Each blade is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A stated stainless steel use and a stated tooth material earn performance points; a listing that states neither scores lower. A spec the listing does not publish scores nothing.

No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. Safety is scored for corded, cordless and air tools and for listings that state safety features; hand tools without either are scored on 90 points.

What the listings tell you

Only one listing here names stainless steel: the Imachinist states its blade cuts stainless steel and other steel under 30 HRC, and gives a recommended blade speed of 100 FPM to 300 FPM for ferrous metals. The other listings describe general portable band saw blades in the same sizes, with M42 bi-metal teeth or a high speed steel edge, and leave the stainless question open. Two listings disagree with their own spec tables on pack count: the Imachinist and DEWALT titles say 3-pack while the tables say 1 item, and the title and bullets are the safer guide. No listing here states a warranty term, and no listing states a safety certification.

Best portable band saw blade for stainless steel: buying guide

Length first

Match the blade length to the saw: the listings here give 44-7/8 inch, 32-7/8 inch and 35-3/8 inch blades, and a blade of the wrong length does not fit at all. Check the length your saw takes before you look at tooth count or pack size.

Tooth count

The listings here give 14, 18 and 24 TPI. The 14 TPI blades are the constant tooth profile the Imachinist listing pairs with stainless steel, and the FOXBC 35-3/8 inch blade uses a 24 TPI hook tooth profile for fine, intricate shapes. Finer teeth suit thinner stock; the FOXBC 44-7/8 inch listing states its blade suits material from 5/16 inch to 1/2 inch thick.

Tooth material

Three listings state a tooth material: the Imachinist and both FOXBC blades use bi-metal M42 high speed steel, and the DEWALT uses a Matrix II high speed steel edge with 8% cobalt. The Imachinist listing also states 8% cobalt and a spring steel backer, and the DEWALT listing states Rc 65-67 tooth hardness and an alloy steel backer. The Lenox listing states no tooth material.

Changing a blade

Wear eye protection and gloves when you change a blade, and unplug the saw first. A dull blade makes the saw work harder, so keep a spare from the pack on the shelf: every pick here comes as a 3-pack or a 5-pack.

FAQ: garage tools

What is a portable band saw?

A portable band saw is a handheld saw for cutting metal stock, and the blade is the looped band it runs. The blades here fit portable saws that take 44-7/8 inch, 32-7/8 inch or 35-3/8 inch blades.

Can a portable band saw cut wood?

The listings here describe metal cutting only. The Imachinist listing recommends against cutting non-ferrous metal, and none of the listings names wood.

How does a portable band saw work?

The looped blade runs around the saw and the teeth cut as the blade moves through the stock. Blade speed matters: the Imachinist listing gives a recommended blade speed of 100 FPM to 300 FPM for ferrous metals.

What TPI should I pick for stainless steel?

The Imachinist listing pairs a constant 14 TPI profile with stainless steel. The other blades here give 18 TPI and 24 TPI without naming stainless, so the 14 TPI Imachinist is the only pick whose listing ties a tooth count to stainless steel.

What length blade does my saw take?

Check the saw, not the blade: the listings here give 44-7/8 inch, 32-7/8 inch and 35-3/8 inch blades, and the FOXBC listings name the saws they fit, including Milwaukee, DeWalt, Makita, Bosch and Wen models. A blade of the wrong length does not fit.

Related: our portable band saw picks, bandsaw blades for thick metal and portable band saw vs angle grinder, and the cordless tools hub.