Best Pulley Puller for Alternator: 5 Picks Compared

An alternator pulley that will not move stops a belt job cold, and the best pulley puller for alternator work is the tool that pulls the pulley straight off without damaging the shaft or the pulley itself. The picks below range from adjustable jaw pullers that grip ribbed pulleys to a bit kit made for alternator shafts, so the right choice depends on the pulley and the space around it.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	DPTOOL Adjustable Harmonic Balancer Puller	9.7/10	Buy on Amazon
2	Prokomon 13 Pieces Alternator Pulley Tool Kit	9.7/10	Buy on Amazon
3	Universal Adjustable Crankshaft Pulley Puller	9.6/10	Buy on Amazon
4	QWORK Universal Ribbed Drive Pulley Crankshaft	9.6/10	Buy on Amazon
5	Prokomon Power Steering Pulley Puller Installer	9.4/10	Buy on Amazon

1

DPTOOL Adjustable Harmonic Balancer Puller

DPTOOL·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An adjustable ribbed pulley puller for crankshafts, alternators, air conditioning units and water pumps, with a triple-threaded screw design.

Check price on Amazon

Pros

• Adjustable arm for pulley size from 35 to 160 mm in diameter
• Triple-threaded screw design grips the pulley tightly without damaging it
• High quality 45 Steel, AISI 1045 Steel, stated for hardness and durability
• 12 Months Warranty stated

Cons

• Application list goes beyond automotive pulleys to wheels and bearings
• Listing warns extra caution on pulleys and seating at the outer flange
• No color or item weight stated

2

Prokomon 13 Pieces Alternator Pulley Tool Kit

Prokomon·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece alternator pulley tool kit with spline and star socket bits for Bosch-type alternators.

Check price on Amazon

Pros

• 13 pieces with spline and star socket bits in standard and short lengths
• Chrome vanadium steel with black oxide finish and polished coating
• Holds the alternator shaft while the pulley retainer comes off
• Works for overlay alternator decoupler and one way clutch pulleys

Cons

• No jaw range stated, since this is a bit kit rather than a jaw puller
• No warranty term stated
• No drive size stated for the bits

3

Universal Adjustable Crankshaft Pulley Puller

ReluxGo·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A universal adjustable crankshaft pulley puller with slim, low-profile arms for tight engine bays.

Check price on Amazon

Pros

• Adjustable jaw range of 35mm to 160mm in the title
• Forged from premium 45 Steel for hardness and durability
• Slim, low-profile arms for tight, restricted engine bays
• Compatible with 17mm wrenches and 3/8 inch square drive tools

Cons

• No warranty term is stated
• No item weight stated
• Designed for crankshaft pulleys, so alternator fit depends on the ribbed pulley size

4

QWORK Universal Ribbed Drive Pulley Crankshaft

QWORK·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A universal ribbed drive pulley remover with low-profile arms and an adjustable jaw opening for restricted engine bays.

Check price on Amazon

Pros

• Maximum jaw opening of 6.3 inches (165mm) with a close of 1-1/4 inches (35mm)
• Low-profile arms for confined engine spaces and damage-free removal
• Holes of 3/8 inch diameter on both sides and the middle part
• Works for crankshafts, alternators, air conditioning units and water pumps

Cons

• No material stated
• No warranty term stated
• No item weight stated
• No alternator-specific bit set included, unlike the Prokomon kit

5

Prokomon Power Steering Pulley Puller Installer

Prokomon·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A power steering pulley puller and installer kit with adapters for Ford, GM, Chrysler and VW applications.

Check price on Amazon

Pros

• Removes and installs pressed-on power steering pump pulleys without damaging components
• Adapters for different pulley hub sizes included
• Carbon steel with heat-treated components for strength and repeated use
• Compact storage case included to keep tools organized

Cons

• Made for power steering pulleys, not alternator pulleys specifically
• No jaw range stated
• No warranty term stated

Compared on paper

Every rating comes from the brand’s listing and is not a shop test (gathered 30 October 2026). One of the five states a warranty term; the other four state no warranty term.

How the points were given

Each puller is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Safety points come from a stated safety feature or listing; none of these five states a safety listing, so safety scores zero across the group. One listing states a warranty term: DPTOOL at 12 Months Warranty.

No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. Only powered tools, or tools with stated safety features, get safety points. Everything else is rated out of 90.

What the listings tell you

Five listings were compared. Three are adjustable jaw pullers with stated jaw ranges, one is a bit kit for alternator shafts, and one is a power steering puller and installer kit. Materials are stated for four of the five, jaw ranges for three, and a warranty term for one. The gaps matter as much as the stated figures, since a missing jaw range or material leaves the fit to guesswork.

How to choose the best pulley puller for alternator

Jaw range before brand

Jaw range is the first fit check on a jaw puller. The DPTOOL puller states a pulley size from 35 to 160 mm in diameter, the ReluxGo title states 35mm to 160mm, and the QWORK puller states a maximum jaw opening of 6.3 inches (165mm) with a close of 1-1/4 inches (35mm). Measure the pulley diameter and match it to the stated range, since a puller that cannot close on the pulley or cannot open wide enough will not grip it at all.

Alternator bits versus jaw pullers

Jaw pullers and bit kits solve different parts of the job. Jaw pullers grip the outside of a ribbed pulley and pull it off the shaft, and the DPTOOL, ReluxGo and QWORK listings all name alternators among their applications. The Prokomon 13-piece kit works differently: it holds the alternator shaft while the pulley retainer comes off, with spline and star socket bits for Bosch-type alternators, and it covers overlay alternator decoupler and one way clutch pulleys. A general guide to pullers, the best pulley puller guide, covers gear sets and power steering kits alongside alternator tools.

Figures as stated in each listing. A bit kit has no jaw range, so its fit is judged by the bit types and the alternator types it names.

Material and grip

Material claims are clearest on the jaw pullers. DPTOOL states high quality 45 Steel, AISI 1045 Steel, with a triple-threaded screw design that grips the pulley tightly without damaging it. ReluxGo states forged premium 45 Steel with precision-machined adjustable claws and a stable threaded design. QWORK states low-profile arms and damage-free removal but states no material, so its build cannot be compared on the same terms. The Prokomon kit states chrome vanadium steel with a black oxide finish, and the power steering kit states carbon steel with heat-treated components.

Check the warranty line

Only DPTOOL states a warranty term, at 12 Months Warranty. The other four listings state no warranty term, including the Prokomon kit and the QWORK puller, whose spec tables give no warranty description at all. A stated term is worth noting on a tool that takes heavy loads, but a missing term is not unusual for a simple puller, and the material and grip details carry more weight in the score here.

Garage Fit Check

• Check the pulley diameter against the stated jaw range before ordering a jaw puller, since ranges run from 35 mm to 165 mm across this group.
• Check engine bay clearance for low-profile arms, since the DPTOOL, ReluxGo and QWORK listings all stress tight, restricted bays.
• Check drive fit: the DPTOOL and ReluxGo listings name a 17 mm wrench and a 3/8 inch square drive, while the QWORK listing names 3/8 inch holes.
• Store bit kits and adapter sets in their cases, since the Prokomon power steering kit includes a compact storage case and the 13-piece kit has standard and short lengths to keep track of.

FAQ: garage tools

What jaw range fits an alternator pulley?

Match the pulley diameter to a stated range: DPTOOL states 35 to 160 mm, ReluxGo states 35mm to 160mm in its title, and QWORK states 1-1/4 inches to 6.3 inches. The Prokomon bit kit states no jaw range, since it works on the shaft rather than gripping the pulley outside.

Do jaw pullers work on alternators, or is a bit kit needed?

Both approaches appear in this group. Jaw pullers from DPTOOL, ReluxGo and QWORK all name alternators among their applications. The Prokomon 13-piece kit holds the alternator shaft while the pulley retainer comes off, and it covers overlay alternator decoupler and one way clutch pulleys.

Why does the ReluxGo listing give two jaw ranges?

The ReluxGo title states 35mm to 160mm, while the bullets state an adjustable jaw range of 35mm to 165mm. The title range is used in the comparison, and the pulley diameter should be checked against both figures before ordering.

Does any pick state a warranty?

DPTOOL states 12 Months Warranty. The other four listings state no warranty term.

Can a power steering puller remove an alternator pulley?

The Prokomon power steering kit is made for pressed-on power steering pump pulleys for Ford, GM, Chrysler and VW applications, not for alternator pulleys specifically. For alternator work, choose a pick that names alternators in its listing, such as the DPTOOL puller or the Prokomon 13-piece kit.

Related: the best pulley puller guide and the engine and shop equipment hub.