Best Trailer Hitch Receiver (2026): 4 Receivers Compared
Four trailer hitch receivers compared by GTW, receiver size, drop, ball sizes and warranty, from stowable adjustable mounts to a weld-on tube.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallB&W Tow & Stow Pintle9.8/10View on Amazon - 2
Best StowableB&W Tow & Stow TS20037B9.7/10View on Amazon - 3
Best AluminumRhino USA Drop Hitch9.7/10View on Amazon - 4
Best Weld-onTOPTOW Weld-on Tube9.3/10View on Amazon
Hooking up a trailer should start with a level trailer and a hitch that matches the truck, not with a guess at the parts counter. The best trailer hitch receiver for a given truck is the one whose receiver size, drop and ball sizes match the trailer, with a GTW rating that covers the load.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall B&W Tow & Stow Pintle: 21,000 GTW with a dual ball and pintle combo, 6.5 in drop and a Limited Lifetime Warranty. Check price on Amazon
- Best Stowable B&W Tow & Stow TS20037B: 18,000 GTW, dual ball, 5 in drop and stows under the truck when not towing. Check price on Amazon
- Best Aluminum Rhino USA Drop Hitch: 12,500 GTW, 6 in drop or rise, locking pins and anti-rattle clamp included. Check price on Amazon
- Best Weld-on TOPTOW Weld-on Tube: 2 in by 2 in tube, 12 in long with a 5/8 in pin hole for a custom weld-on setup. Check price on Amazon
Picks for the garage

B&W Trailer Hitches Dual Ball Pintle Tow & Stow
A stowable adjustable ball mount with a dual ball and pintle combo, rated at 21,000 GTW with a 6.5 in drop for a 2.5 in receiver.
Pros
- 21,000 GTW, the highest rating here
- Dual ball and pintle combo tows ball and pintle trailers
- Stows under the truck when not towing
- E-coat and black powder coat over American-made steel
Cons
- Fits 2.5 in receivers only
- Heavier than the other adjustable mounts here
- Pintle combo is more mount than a ball-only trailer needs
- Stowing takes rotating the mount and replacing the pins each time

B&W Trailer Hitches Tow & Stow Adjustable Trailer
A stowable adjustable ball mount with dual balls, rated at 18,000 GTW with a 5 in drop for a 2.5 in receiver.
Pros
- 18,000 GTW rating
- Dual ball swaps between 2 in and 2-5/16 in by rotating the assembly
- Stows under the truck when not towing
- E-coat and black powder coat over American-made steel
Cons
- Fits 2.5 in receivers only
- Heavier than the Rhino at 25.0 pounds
- 5 in drop is the smallest drop among the adjustable mounts here
- Stowing takes rotating the mount and replacing the pins each time

Rhino USA Adjustable Trailer Hitch (2in Receiver)
An aluminum adjustable hitch with a 6 in drop and rise, rated at 12,500 GTW with the 2-5/16 in ball and 8,000 GTW with the 2 in ball, for 2 in receivers.
Pros
- 12,500 GTW with the 2-5/16 in ball
- Lightest adjustable mount here at 16.8 pounds
- Locking hitch pins and anti-rattle clamp included
- Aluminum build with a Lifetime warranty
Cons
- Fits 2 in receivers only
- 2 in ball is rated at 8,000, below the B&W mounts
- Suits trailers with receivers 18 in to 20 in from the ground
- Must come out of the receiver or stay in place between tows

TOPTOW 64455 Trailer Hitch Weld-on Receiver Tube
A raw steel weld-on receiver tube, 2 in by 2 in and 12 in long, with a 5/8 in pre-drilled hitch pin hole for a custom welding project.
Pros
- 2 in by 2 in industry-standard fit
- 12 in of total length for a custom setup
- 5/8 in pre-drilled hitch pin hole
- Raw steel finish, ready to weld
Cons
- No GTW rating is stated, so it cannot be matched to a trailer by rating alone
- Needs welding, so it is not a bolt-on install
- No warranty term is stated
- One size only: 2 in by 2 in and 12 in long
Other tools worth a look
Rhino USA Adjustable Trailer HitchCheck price on Amazon
CURT 13241 Class 3 Trailer HitchCheck price on Amazon
CURT 13322 Class 3 Trailer HitchCheck price on Amazon
CURT 13652 Class 3 Trailer HitchCheck price on Amazon
CURT 13200 Class 3 Trailer HitchCheck price on Amazon
CURT 14017 Class 4 Trailer HitchCheck price on Amazon
Compared on paper
| Model | Shop Score | Receiver | GTW | Drop | Ball sizes | Stows | Warranty |
|---|---|---|---|---|---|---|---|
| B&W Tow & Stow Pintle | 9.8/10 | 2.5 in | 21,000 | 6.5 in | 2 and 2-5/16 in, plus pintle | Yes | Limited Lifetime |
| B&W Tow & Stow TS20037B | 9.7/10 | 2.5 in | 18,000 | 5 in | 2 and 2-5/16 in | Yes | Limited Lifetime |
| Rhino USA Drop Hitch | 9.7/10 | 2 in | 12,500 | 6 in | 2 and 2-5/16 in | Not stated | Lifetime |
| TOPTOW Weld-on Tube | 9.3/10 | 2 in | Not stated | Not stated | Not stated | Not stated | Not stated |
Every rating comes from the brand’s listing and is not a shop test (gathered 14 November 2026).
How the points were given
Each hitch is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None states a UL, ETL or CSA listing, so all score zero on safety, and 1 gives no warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| B&W Tow & Stow Pintle | 9.8 | 33 | 22 | 20 | n/a | 4 |
| B&W Tow & Stow TS20037B | 9.7 | 32 | 22 | 20 | n/a | 4 |
| Rhino USA Drop Hitch | 9.7 | 29 | 21 | 21 | n/a | 4 |
| TOPTOW Weld-on Tube | 9.3 | 21 | 18 | 16 | n/a | 0 |
No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. Only powered tools, or tools with stated safety features, get safety points. Everything else is rated out of 90.
What the listings tell you
Four hitch listings were read for this roundup. Three state a GTW rating, and 3 state a warranty term. Two fit a 2.5 in receiver and 2 fit a 2 in receiver. Two stow under the truck when not towing, and 1 is a weld-on tube with no stated capacity or warranty.
Buying guide: choosing the best trailer hitch receiver
Receiver size
The Rhino fits 2 in Class 3 and 4 receivers, the kind found on half-ton trucks and SUVs, while both B&W mounts fit 2.5 in receivers. A 2 in mount does not fit a 2.5 in receiver, so measure the opening on the truck before ordering.
Drop and rise
Drop sets how level the trailer rides. The B&W Tow & Stow drops 5 in, the Rhino drops 6 in in either direction, and the pintle model drops 6.5 in. The Rhino suits trailers with receivers 18 in to 20 in from the ground, and the B&W mounts adjust with 2 stainless steel pins.
Ball sizes and capacity
Capacity follows the ball. On the Rhino, the 2 in ball is rated at 8,000 and the 2-5/16 in ball at 12,500. The B&W Tow & Stow is rated at 18,000, and the pintle model at 21,000 with a dual ball and pintle combo. The ball must match the trailer coupler, so check the coupler size before choosing.
Stowing and security
Both B&W mounts stow under the truck when not towing: rotate the hitch under the vehicle, replace the pins, and the mount tucks away from shins and the garage door. The Rhino includes weatherproof double anti-theft locking hitch pins and an anti-rattle clamp, so the mount stays put on the road.
Weld-on or complete hitch
The TOPTOW tube is a different kind of pick: a raw steel weld-on receiver tube, 2 in by 2 in and 12 in long, with a 5/8 in pre-drilled hitch pin hole, made for a custom welding project. It carries no stated GTW rating and no stated warranty, so it suits a custom welding project rather than a ready-to-tow install.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Measure the receiver opening on the truck: 2 in and 2.5 in mounts are both in this roundup and do not swap.
- Check the drop against the trailer: the adjustable mounts here drop 5 in, 6 in and 6.5 in, and the Rhino suits receivers 18 in to 20 in from the ground.
- Leave room to stow: both B&W mounts rotate under the truck, so check clearance under the rear bumper before the first tow.
- Keep the pins with the hitch: the Rhino locking pins and the B&W adjustment pins are small parts that are easy to misplace.
- Plan the weld: the TOPTOW tube is raw steel for a custom project, so it needs welding gear and a dry place to store it.
FAQ: garage tools
What is towing capacity?
Towing capacity is the weight a hitch is rated to pull, stated here as GTW. The adjustable mounts in this roundup are rated from 8,000 to 21,000, so match the rating to the trailer.
What size trailer hitch receiver do I need?
Measure the receiver opening on the truck. The mounts here fit 2 in and 2.5 in receivers: the Rhino fits 2 in Class 3 and 4 receivers, and both B&W mounts fit 2.5 in receivers.
What is the difference between a 2 in and a 2-5/16 in ball?
The ball must match the trailer coupler, and the larger ball carries the higher rating on the Rhino: 8,000 with the 2 in ball and 12,500 with the 2-5/16 in ball. Both B&W mounts carry both ball sizes.
How does towing work?
A receiver on the truck holds a ball mount, the ball sits in the trailer coupler, and the trailer follows the truck. A drop or rise mount keeps the trailer level, and the pins lock the mount in the receiver.
Related: the best hitch cargo carrier, the best towing hitch locks, the best come along for vehicle recovery and the cargo and towing hub.




