Best Wire Loom (2026)
Five split wire loom tubings for automotive, marine and shop wiring, compared by diameter, length, temperature range and listings.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Best overallAlex Tech 1/2 in 25 ft9.6/10View on Amazon - 2
Best multi-sizeBEST CONNECTIONS 3-size9.5/10View on Amazon - 3
Best bulkYesBes 120 ft9.5/10View on Amazon - 4
Best kitYesBes 3-size 50 ft9.5/10View on Amazon
The engine bay wiring is a mess of splices and bare runs. One chafed wire and you are chasing a short through the harness. Split wire loom wraps the wires in a protective sleeve that opens along its length. This guide to the best wire loom covers five split loom tubings for automotive, marine and shop wiring. We compared them on diameter, length, temperature range and listings, using only what each listing states. Every number below comes straight from the listings. Pick the loom that fits your wires.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best overall Alex Tech 1/2 in 25 ft: UL Recognized 1/2 in split loom, -103 to 257 degrees, 25 ft. Check price on Amazon
- Best multi-size BEST CONNECTIONS 3-size: 1/4, 1/2 and 3/4 in in one box, RoHS and REACH compliant. Check price on Amazon
- Best bulk YesBes 120 ft: 120 ft of 1/2 in loom, under-hood rated, indoor or outdoor. Check price on Amazon
- Best kit YesBes 3-size 50 ft: 1/4, 1/2 and 3/8 in, 50 ft each, under-hood rated. Check price on Amazon
The picks
Alex Tech 25ft - 1/2 inch Cord Protector Wire Loom
25 ft of 1/2 in split wire loom tubing in black polyethylene, rated -103 to 257 degrees with a 446-degree melt temp, UL Recognized and insulated.
Pros
- UL Recognized
- -103 to 257 degree range, 446 melt
- Split and self-wrap design
- Insulated
Cons
- No warranty term is stated
- 1/2 in size only
- 25 ft covers one job
- Black only
Split Wire Loom Flex-Guard Convoluted Tubing
20 ft each of 1/4, 1/2 and 3/4 in split wire loom tubing in black polyethylene, rated 149 degrees continuous and 194 degrees short time, RoHS and REACH compliant.
Pros
- Three diameters in one box
- RoHS and REACH compliant
- Resists auto fluids and chemicals
- Cuts to any length
Cons
- No concrete warranty term
- 149 degree continuous rating
- 20 ft per size
- Black only
120 FT Wire Loom 1/2 Inch
120 ft of 1/2 in split wire loom tubing in black polyethylene, rated -40 to 200 degrees, listed for under-hood use away from the exhaust manifold, indoor or outdoor.
Pros
- 120 ft, the longest here
- Under-hood use listed
- Indoor or outdoor
- Cuts to any length
Cons
- No concrete warranty term
- 1/2 in size only
- -40 to 200 degree range
- Keep away from exhaust manifold
Wire Loom 1/4", 1/2", 3/8 Inch x 50 FT
50 ft each of 1/4, 1/2 and 3/8 in split wire loom tubing in black polyethylene, rated -40 to 200 degrees, listed for under-hood use away from the exhaust manifold.
Pros
- Three diameters, 50 ft each
- Under-hood use listed
- Indoor or outdoor
- Cuts to any length
Cons
- No concrete warranty term
- -40 to 200 degree range
- Keep away from exhaust manifold
- Black only
Alex Tech 25ft - 1/4 inch Split Wire Loom Tubing
25 ft of 1/4 in split wire loom tubing in black polyethylene, rated -94 to 257 degrees, resistant to abrasion and chemicals.
Pros
- -94 to 257 degree range
- Resists abrasion and chemicals
- Split and easy to load
- 100% new polyethylene
Cons
- No warranty term is stated
- 1/4 in size only
- 25 ft covers one job
- Black only
Compare the picks
| Model | Shop Score | Diameter | Length | Temp range | Listing |
|---|---|---|---|---|---|
| Alex Tech 1/2 in 25 ft | 9.6/10 | 1/2 in | 25 ft | -103 to 257 F | UL Recognized |
| BEST CONNECTIONS 3-size | 9.5/10 | 1/4, 1/2, 3/4 in | 20 ft each | 149 F cont., 194 F short | RoHS, REACH |
| YesBes 120 ft | 9.5/10 | 1/2 in | 120 ft | -40 to 200 F | Not stated |
| YesBes 3-size 50 ft | 9.5/10 | 1/4, 1/2, 3/8 in | 50 ft each | -40 to 200 F | Not stated |
| Alex Tech 1/4 in 25 ft | 9.5/10 | 1/4 in | 25 ft | -94 to 257 F | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 22 October 2026. Where a listing states a figure two ways, the table shows both.
How we scored them
Each loom is scored on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on our How We Pick page.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Alex Tech 1/2 in 25 ft | 9.6 | 32 | 21 | 21 | 3 | 0 |
| BEST CONNECTIONS 3-size | 9.5 | 30 | 21 | 21 | 0 | 0 |
| YesBes 120 ft | 9.5 | 30 | 20 | 22 | 0 | 0 |
| YesBes 3-size 50 ft | 9.5 | 30 | 20 | 22 | 0 | 0 |
| Alex Tech 1/4 in 25 ft | 9.5 | 29 | 20 | 21 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
Buying guide: the best wire loom
Diameter: 1/4, 1/2 or 3/4 in
Diameter is the first match. A 1/2 in loom fits a main harness or a bundle of wires; a 1/4 in loom fits single wires or small runs. The Alex Tech 1/2 in and the YesBes 120 ft are 1/2 in only; the Alex Tech 1/4 in is 1/4 in only. The BEST CONNECTIONS kit covers 1/4, 1/2 and 3/4 in, and the YesBes 3-size kit covers 1/4, 1/2 and 3/8 in. If you are wiring one car, a multi-size kit covers every run, from the battery cable down to the sensor wires. Measure the bundle with a tape, not by eye, and buy the loom that slips over it without forcing. Forcing a small loom over a fat bundle splits the slit open and defeats the purpose.
Temperature range
Read the temperature range before the loom goes near heat. The Alex Tech 1/2 in lists an operating temp of -103 to 257 degrees Fahrenheit with a melt temp of 446 degrees, the widest range here. The Alex Tech 1/4 in lists -94 to 257 degrees. The YesBes looms list -40 to 200 degrees and state under-hood use, but away from the exhaust manifold. The BEST CONNECTIONS lists 65 degrees Celsius (149 Fahrenheit) continuous and 90 degrees Celsius (194 Fahrenheit) for a short time. For engine bay work, the YesBes or the high-temp Alex Tech are the picks; for interior, trunk and shop wiring, where the heat never climbs, any of the five works. When in doubt, route the loom and check the hottest point with your hand after a drive.
Length: 25 ft or 120 ft
Length decides how many jobs one box covers. The Alex Tech looms and the BEST CONNECTIONS kit are 25 ft and 20 ft, enough for one harness or one project. The YesBes 120 ft is 120 ft of 1/2 in loom, enough to re-loom a whole car, from the engine bay to the tail lights. The YesBes 3-size kit gives 50 ft each of 1/4, 1/2 and 3/8 in, which is 150 ft total across three sizes. Buy the length for the job at hand; leftover loom coils up and stores fine on the shelf for the next repair.
Split loom basics
All five are split loom: a slit runs the length of the tubing, so you find the slit, put the wire in, and the slit closes on itself. The Alex Tech 1/2 in lists split and self-wrap; the others describe the same split-and-close design. Cut the loom to any length for a custom fit, and secure the ends with a zip tie or tape so the split stays shut on a long run. The material is polyethylene across all five, which the listings describe as resistant to abrasion and chemicals. The BEST CONNECTIONS adds RoHS and REACH compliance, and the Alex Tech 1/2 in is UL Recognized.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Match the loom diameter to the wire bundle: 1/2 in for a main harness, 1/4 in for single wires.
- The YesBes looms list under-hood use, but the listing says to keep them away from the exhaust manifold.
- Cut the loom to length; the split closes on itself once the wires are inside.
- The Alex Tech 1/2 in is UL Recognized; the BEST CONNECTIONS lists RoHS and REACH compliance.
- Route the loom away from sharp edges and moving parts, and secure the ends so the split stays shut.
Frequently Asked Questions
What size wire loom do I need?
Measure the wire bundle and match the inner diameter. A 1/2 in loom fits a main harness; a 1/4 in loom fits single wires. The BEST CONNECTIONS kit covers 1/4, 1/2 and 3/4 in, and the YesBes 3-size kit covers 1/4, 1/2 and 3/8 in, so a multi-size kit covers every run on one car.
Can wire loom go under the hood?
The YesBes looms list under-hood use with a -40 to 200 degree range, but the listing says to keep the loom away from the exhaust manifold. The Alex Tech 1/2 in lists -103 to 257 degrees with a 446-degree melt temp, the widest range here. Check the range against the hottest spot on the route.
What temperature can these looms take?
The Alex Tech 1/2 in lists -103 to 257 degrees Fahrenheit; the Alex Tech 1/4 in lists -94 to 257 degrees. The YesBes looms list -40 to 200 degrees. The BEST CONNECTIONS lists 149 degrees continuous and 194 degrees for a short time. Pick the range that covers the hottest point the wires will see.
How do I install split wire loom?
Find the slit along the tubing, open it, put the wires in, and let the slit close on itself. Cut the loom to any length with scissors or a knife. The listings describe the same split-and-close design on all five, so installation is the same whatever size you buy.
Is wire loom the same as cable sleeve?
The listings use both terms for the same split tubing. The Alex Tech titles call it wire loom tubing and cable sleeve; the YesBes titles call it wire loom tubing and wire conduit. Buy by diameter and length, not by the name on the box.
Can I use wire loom for home theater cables?
Yes. The Alex Tech 1/2 in listing names Hifi speaker, HDMI and home and office wiring among its uses, and the YesBes looms list computer leads and television cables. The same split-and-close loom that protects an engine harness tidies the cables behind the TV. Pick the diameter that fits the bundle.
Related guides
Also see our best wire crimping tool. Also see our best welding wire for beginners. Also see our wire brush vs wire wheel.
