Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Bolt Extractor Size Chart (2026): Match the Size

Match the extractor to the broken bolt by size range, drive and depth, with the chart and four sets below.

Bolt Extractor Size Chart (2026): Match the Size
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 165-Piece Broken Bolt Extractor Kit with Easy Out65-Piece Broken Bolt Extractor Kit with Easy Out9.6/10View on Amazon
  2. 232 Pcs Bolt Extractor Kit32 Pcs Bolt Extractor Kit9.6/10View on Amazon
  3. 3Irwin Tools IRWIN Screw Extractor/ Drill Bit SetIrwin Tools IRWIN Screw Extractor/ Drill Bit Set9.6/10View on Amazon
  4. 414Pcs Screw Extractor Set and Left Hand Drill Bits14Pcs Screw Extractor Set and Left Hand Drill Bits9.5/10View on Amazon

A bolt extractor size chart matches the extractor to the broken bolt by the size of the fastener it grips. The short answer: read the size range on the set, pick the extractor that matches the bolt, and check the drive before you order. This guide lays out the chart from the sets below, then shows how to use it.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: the size chart, how to read it, how to match an extractor to a broken bolt, and the gear that covers each size.

65-Piece Broken Bolt Extractor Kit with Easy Out

65-Piece Broken Bolt Extractor Kit with Easy Out

THINKWORK9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 65-piece extractor kit for damaged, rusted, rounded-off and stripped fasteners from 8 to 19mm, in chrome-molybdenum and high-speed steel with left-hand drill bits.

Pros

  • 65 pieces cover fasteners from 8 to 19mm
  • Two extractor depths, 2.5 inch and 1.06 inch
  • Chrome-molybdenum and high-speed steel
  • 3/8 inch square drive fits hand, air or power tools

Cons

  • No warranty term is stated
  • 65 pieces to keep track of, more than any other set here
  • Needs a wrench or socket for the hexagon heads
  • Depth extractors come in only two depths
32 Pcs Bolt Extractor Kit

32 Pcs Bolt Extractor Kit

THINKWORK9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 32-piece extractor kit for damaged, rusted, rounded-off and stripped fasteners from 6 to 19mm, in chrome-molybdenum steel with 1/4 and 3/8 inch drives.

Pros

  • 32 pieces cover fasteners from 6 to 19mm
  • 1/4 and 3/8 inch drives with a socket adapter
  • Chrome-molybdenum steel
  • Knockout pin for easier removal

Cons

  • No warranty term is stated
  • 32 pieces is fewer than the 65-piece kit
  • Fasteners over 19mm need another set
  • Starts at 6mm, so fasteners under 6mm need another set
Irwin Tools IRWIN Screw Extractor/ Drill Bit Set

Irwin Tools IRWIN Screw Extractor/ Drill Bit Set

IRWIN9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10pc screw extractor and drill bit set: 5 spiral flute extractors with matched bits and a Limited lifetime warranty.

Pros

  • Limited lifetime warranty, the only one here
  • Each extractor etched with its drill bit size
  • Aggressive left-hand spiral flutes
  • Metal index case included

Cons

  • Material listed only as a brushed blend
  • 5 extractors is the smaller range here
  • 6.4 oz kit, light for heavy bolts
14Pcs Screw Extractor Set and Left Hand Drill Bits

14Pcs Screw Extractor Set and Left Hand Drill Bits

WYBENZ9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

14pc screw extractor and left-hand drill bit set: 7 cobalt HSS bits plus 7 Cr-Mo extractors with a usage guide.

Pros

  • Cobalt-fortified HSS drill bits at HRC 63 to 66
  • 135-degree point for easier cutting
  • Detailed usage guide in the listing
  • Portable storage case

Cons

  • No warranty term stated on the listing
  • Not for 440 stainless or hardened alloys
  • Duplicate sizes reduce the effective range

Bolt extractor size chart

Set Size range Drive Pieces
THINKWORK 65-Piece Kit 8 to 19mm 3/8 inch 65
THINKWORK 32-Piece Kit 6 to 19mm 1/4 and 3/8 inch 32
IRWIN 10-Piece Set Not stated Not stated 10
WYBENZ 14-Piece Set Not stated Not stated 14

Read the range first: the 32-piece set starts at 6mm and the 65-piece set starts at 8mm, and both run to 19mm. Match the extractor to the bolt before you drill, and check the drive against the tools you own.

How to read the chart

Start with the size range. A set that starts at 6mm takes smaller fasteners than one that starts at 8mm, and both sets here run to 19mm, so the 32-piece set covers the wider span. Next check the drive: the 65-piece set uses a 3/8 inch square drive, and the 32-piece set uses 1/4 and 3/8 inch drives with a socket adapter, so both fit hand, air or power tools. Then check the depth: the 65-piece set includes two depth extractors, 2.5 inch and 1.06 inch, for different applications.

How to match an extractor to a broken bolt

Pick the extractor that matches the fastener size. On the THINKWORK sets, a reverse spiral flute bites tighter as resistance rises, so the extractor that fits the bolt grips best. Use the drive your tools already fit: a 3/8 inch square drive fits hand, air and power tools, and the 32-piece set uses 1/4 and 3/8 inch drives with a socket adapter. Where the set includes left-hand drill bits, use them for the drilling step, and keep the laser-etched markings readable so the right size goes back in the right slot.

Extractor sets that cover the chart

The sets below are the gear for the chart above: match the size range and drive to the bolt before you order.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

FAQ: garage tools

What size extractor do I need for a broken bolt?

Read the size range on the set: the 32-piece set covers 6 to 19mm and the 65-piece set covers 8 to 19mm. Pick the extractor that matches the fastener, and check the drive before you order.

What drive do these extractor sets use?

The 65-piece set uses a 3/8 inch square drive, and the 32-piece set uses 1/4 and 3/8 inch drives with a socket adapter. Both fit hand, air or power tools.

Do these sets include left-hand drill bits?

The 65-piece set and the WYBENZ set include left-hand drill bits, and the IRWIN set includes drill bits. The 32-piece set is an extractor and socket set.

What is the difference between the 65-piece and 32-piece sets?

The 65-piece set covers 8 to 19mm with two depth extractors and left-hand drill bits. The 32-piece set covers 6 to 19mm with 1/4 and 3/8 inch drives, a socket adapter and a knockout pin.

Can I use an extractor in a tight space?

Yes. The 65-piece set and the 32-piece set are both made for tight spaces, and the 65-piece set has two depth extractors, 2.5 inch and 1.06 inch, for different applications. Check the depth against the space you have.

Related: best broken bolt extractor, penetrating oil for rusted bolts, induction heater for bolts, hex key sizes chart and our engine and shop equipment hub.

More buying guides

Engine and Shop Equipment ·

Best Broken Bolt Extractor (2026)

Five extractor sets for broken bolts, compared by piece count, size range, steel and warranty, with a 46-piece set and a stud extractor.

Engine and Shop Equipment ·

Best Bolt Extractor Set Under $50 (2026)

Five bolt extractor sets under $50 compared: a 25-piece multi-spline set, 14-piece kits with left-hand drill bits and a 4-piece Bolt Biter set, with…