Circular Saw vs Reciprocating Saw: Which One Should You Buy?
Circular and reciprocating saws compared by cut action, blade, speed, power and weight, with 2 examples on each side.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
DEWALT 20V MAX XR Brushless Cordless 7-1/4 in.9.7/10View on Amazon - 2
DEWALT 20V MAX Circular Saw Cordless9.5/10View on Amazon - 3
Cordless Reciprocating Saw With 8 Blades9.5/10View on Amazon - 4
WEN 3630 10-Amp 8-Position Variable Speed9.4/10View on Amazon
Verdict: Choose a circular saw if you want straight cuts and bevel cuts in sheet goods and lumber. Choose a reciprocating saw if you want demolition, trimming and cuts in tight spaces.
A sheet of plywood and a wall stud ask for different saws, and the garage ends up owning both sooner or later. This comparison lines up the circular saw vs reciprocating saw choice by cut action, blade, speed, power and weight, with examples on each side from the listings.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Example saws

DEWALT 20V MAX XR Brushless Cordless 7-1/4 in.
A 20V MAX XR brushless 7-1/4 in circular saw with up to 5,500 RPM, up to 1,700 MWO, an electric brake and a maximum depth of cut of 2-9/16 in at 90 degrees.
Pros
- Brushless motor with up to 5,500 RPM no-load speed
- Up to 1,700 MWO for tough applications
- Up to 368 cuts per charge
- Electric brake stops the blade after the trigger is released
Cons
- No warranty term is stated
- Tool only; battery and charger come separately
- 9.88 lb, heavier than either reciprocating saw here
- Depth of cut drops to 2 in at 45 degrees from 2-9/16 in at 90 degrees

DEWALT 20V MAX Circular Saw Cordless
A 20V MAX cordless 6-1/2 in circular saw with a 5150 RPM motor, a magnesium shoe, a rubber overmolded grip and 0-50 degree bevel capacity, with a 3 year limited warranty.
Pros
- 5150 RPM motor for demanding cuts
- Magnesium shoe for jobsite durability
- 0-50 degree bevel capacity for angled cuts
- 3 year limited warranty
Cons
- Battery not included
- 6-1/2 in blade, smaller than the 7-1/4 in blade on the DCS590B
- No electric brake
- Yellow is the only color stated

Cordless Reciprocating Saw With 8 Blades
A 21V cordless reciprocating saw with a 500W brushless motor, 0-3200 RPM variable speed, a 1.1 in stroke, 2 4.0Ah batteries, 8 carbide blades and a built-in LED light, at 3 lb.
Pros
- 2 4.0Ah batteries and 30 minutes of runtime
- 8 carbide blades for wood, plastic, aluminum, steel, fiberglass and sheetrock
- Tool-free blade change in 5 seconds
- 3 lb with a built-in LED light and safety button
Cons
- No warranty term is stated
- 30 minute runtime, so keep the second battery charged
- Burnt orange is the only color stated
- Built for tight spaces and demolition, not long straight cuts

WEN 3630 10-Amp 8-Position Variable Speed
A 10-amp corded reciprocating saw with 0 to 2800 strokes per minute, an 8-position pivoting head, a twist-lock quick-release blade holder and a two-year warranty, at 7.7 lb.
Pros
- 10-amp motor for wood up to 4-1/2 in and metal to 3/5 in
- 0 to 2800 strokes per minute with a pressure-sensitive trigger
- Pivoting head with 8 stops, one every 45 degrees
- Two-year warranty with a metal and a wood blade in the box
Cons
- Corded, so it needs an outlet nearby
- 7.7 lb, heavier than the 3 lb olmlmo saw
- One metal blade and one wood blade in the box, against 8 blades with the olmlmo saw
- Black is the only color stated
Other tools worth a look
Skil 5080-01 13-Amp 7-1/4" Circular SawCheck price on Amazon
Milwaukee M18 BRUSHLESS 7-1/4" CIRCULAR SAWCheck price on Amazon
DEWALT Circular SawCheck price on Amazon
Makita 5007F 7-1/4" Circular SawCheck price on Amazon
DEWALT 7-1/4-Inch Circular SawCheck price on Amazon
Bosch CS10 7-1/4 In. Circular SawCheck price on Amazon
Circular saw vs reciprocating saw side by side
| Factor | Circular saw | Reciprocating saw | Takeaway |
|---|---|---|---|
| Cut action | Spinning blade for straight cuts | Back-and-forth blade for demolition | Action splits the sides |
| Blade | 6-1/2 in and 7-1/4 in round blades | 8 blades with the olmlmo kit; 2 blades with the WEN | Circular blades are round; recip blades swap by material |
| Best jobs | Straight cuts and bevel cuts | Demolition, trimming and tight spaces | Job decides the side |
| Speed | 5150 RPM and up to 5,500 RPM | 0-3200 RPM on the olmlmo; 0 to 2800 strokes per minute on the WEN | RPM is stated on three examples; the WEN uses strokes per minute |
| Power | 20V MAX on both circular examples | 21V on the olmlmo; 10-amp corded on the WEN | Three run on batteries; the WEN plugs in |
| Depth and capacity | 2-9/16 in at 90 degrees on the DCS590B | 4-1/2 in of wood on the WEN | Capacity is stated per example, not per side |
| Weight | 9.88 lb on the DCS590B | 3 lb on the olmlmo; 7.7 lb on the WEN | Weight is stated per example, not per side |
| Warranty | 3 year limited on the DCS391B | Two-year on the WEN | Only 2 examples state a term |
Specs are the manufacturer’s ratings as listed, collected 15 November 2026.
Circular saw: straight cuts and bevels
A circular saw cuts with a spinning round blade, so it suits straight cuts through sheet goods and lumber. The DEWALT examples here run on 20V MAX batteries, with 6-1/2 in and 7-1/4 in blades, and the DCS391B adds 0-50 degree bevel capacity for angled cuts. The DCS590B adds an electric brake and up to 5,500 RPM for fast, deep cuts.
Reciprocating saw: demolition and tight spaces
A reciprocating saw cuts with a blade that moves back and forth. It works in tight spaces and through mixed material. The olmlmo example is a 21V cordless saw with 8 blades for wood, plastic, aluminum, steel, fiberglass and sheetrock, while the WEN example is a 10-amp corded saw with a pivoting head. Both change blades without tools.
Power and speed
Speed is stated as RPM on three examples and as strokes per minute on the WEN. The DCS590B lists up to 5,500 RPM, the DCS391B lists 5150 RPM, the olmlmo lists 0-3200 RPM, and the WEN lists 0 to 2800 strokes per minute. Power is 20V MAX on both circular examples, 21V with a 500W motor on the olmlmo, and 10-amp corded on the WEN. Do not compare RPM and strokes per minute as if they were the same figure.
Blades and depth
Blade and depth figures are stated per example. The circular examples use 6-1/2 in and 7-1/4 in round blades, and the DCS590B cuts to 2-9/16 in at 90 degrees and 2 in at 45 degrees. The recip examples swap blades by material: the olmlmo kit holds 8 carbide blades, and the WEN box holds one metal blade and one wood blade. The WEN handles up to 4-1/2 in of wood and 3/5 in of metal.
Choose a circular saw if
- You cut straight lines in sheet goods and lumber
- You want 0-50 degree bevel capacity for angled cuts
- You want a brake that stops the blade fast
- You already own 20V MAX batteries
Choose a reciprocating saw if
- You cut demolition, branches and mixed material
- You work in tight spaces
- You want to swap blades by material
- You want a corded saw that never needs charging
For more choices, see the best circular saw guide and the best reciprocating saw.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Check the battery platform before ordering: the DEWALT examples run on 20V MAX and the olmlmo runs on 21V.
- The WEN is corded, so keep an outlet within reach of the job.
- The DCS590B and DCS391B arrive as tool only, so confirm a battery and charger are on hand.
- Count the blades: the olmlmo kit holds 8 blades, while the WEN box holds 2.
FAQ: garage tools
Can a circular saw cut the same jobs as a reciprocating saw?
Both cut wood, but the jobs differ. A circular saw suits straight cuts and bevels, while a reciprocating saw works in tight spaces and through mixed material for demolition and trimming.
Which saw is better for demolition?
The reciprocating saw. The olmlmo is built for demolition, tree trimming and branch cutting, and the WEN pivots its head for varied jobs.
Do I need a battery for the DEWALT circular saws?
Yes. The DCS391B states the battery is not included, and the DCS590B is sold as a tool only, so both need a 20V MAX battery and charger.
How deep can the DEWALT DCS590B cut?
Up to 2-9/16 in at 90 degrees and 2 in at 45 degrees.
How many blades come with the olmlmo saw?
8 carbide blades, for wood, plastic, aluminum, steel, fiberglass and sheetrock.
Related: the best circular saw guide, the best reciprocating saw, the reciprocating saw blade types, the best corded circular saw and our cordless tools hub.




