Pressure Washer Wand Parts: Replacement Options
The gun, lance, hose, nozzles and fittings that make up a pressure washer wand, and how to match replacements to your washer.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
GFGD Swivel Pressure Washer Gun with Extension9.6/10View on Amazon - 2
Pressure Washer Gun and Hose Kit 25FT9.6/10View on Amazon - 3
FIXFANS Pressure Washer Gun and Hose Kit9.5/10View on Amazon - 4
YAMATIC Pressure Washer Gun and 25 FT Hose9.4/10View on Amazon
The driveway is washed in strips, the wand drips at the joint, and the trigger sticks: a pressure washer is only as good as the wand in your hand. Pressure washer wand parts are the pieces that wear out: the gun, the lance, the hose, the nozzles and the fittings that join them. This guide names each part, shows how to match replacements to your washer, and compares 4 gun and wand kits that cover the common jobs.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
GFGD Swivel Pressure Washer Gun with Extension
A 5000 PSI swivel gun with a 3-length extension wand, 5 nozzles and 3 adapters, built from stainless steel and brass with a safety lock.
Pros
- Thicker-gauge stainless steel wand, solid brass body, ceramic valve core
- 360-degree swivel fitting keeps the hose from tangling
- 3 wand lengths (36, 23 and 10 inches) for cars, driveways and high windows
- 5 nozzles from 0 to 65 degrees with a holder, plus a safety lock
Cons
- No hose is included; the gun and wand need a hose from elsewhere
- No soap nozzle is included; the five tips are all water jets
- The 36 inch wand needs storage room
- No warranty term is stated
Pressure Washer Gun and Hose Kit 25FT
A 25 ft gun and hose kit with 3 wand lengths, 5 nozzle tips and M22-14mm fittings, rated to 5000 PSI at the gun and 3600 PSI at the hose.
Pros
- Gun rated to 5000 PSI with a 25 ft hose rated to 3600 PSI and 8 GPM
- 3 wand lengths (9, 24 and 40 inches) for detailing and high reach
- 5 nozzle tips from 0 to 40 degrees plus a soap tip
- Safety lock on the trigger and an anti-slip ergonomic handle
Cons
- The hose is PVC, not rubber
- The hose is rated 3600 PSI while the gun is rated 5000 PSI, so the hose sets the working limit
- The 40 inch wand needs storage room
- No M22-15mm adapter is included
FIXFANS Pressure Washer Gun and Hose Kit
A 25 ft gun and hose kit with 3 stainless steel wand lengths, 5 nozzle tips and a trigger lock, rated to 5000 PSI at the gun and 3600 PSI working at the hose.
Pros
- Gun rated to 5000 PSI with a 25 ft hose rated to 3600 PSI working and 9000 PSI burst
- 3 stainless steel wand lengths (37.4, 21.7 and 7.1 inches)
- 8 GPM max flow with water temperatures up to 140F
- Trigger lock and a comfortable handle, with 5 nozzle tips
Cons
- The hose is PVC, not rubber
- The hose is rated 3600 PSI working while the gun is rated 5000 PSI, so the hose sets the working limit
- No nozzle holder is included
- No M22-15mm adapter is included
YAMATIC Pressure Washer Gun and 25 FT Hose
A 4000 PSI gun with a 25 ft kink-resistant hose rated to 3200 PSI and 2 adjustable extension lances that set 3 lengths, with a swivel inlet and brass fittings.
Pros
- Gun rated to 4000 PSI with a swivel 3/8 inch inlet that keeps the hose from kinking
- 25 ft kink-resistant hose rated to 3200 PSI
- 2 adjustable extension lances set 3 lengths for high or ground-level work
- Solid brass components, shockproof reinforced gun body
Cons
- No nozzles are included in the kit
- The hose is rated 3200 PSI while the gun is rated 4000 PSI, so the hose sets the working limit
- Needs a pressure washer; it does not fit a garden hose
- No warranty term is stated
Pressure washer wand parts: what each piece does
The gun is the handle and trigger: it starts and stops the water, and its inlet takes the hose. The lance, also called the wand or extension, sets the reach: a short lance suits cars and close work, while a long lance reaches roofs, gutters and high siding. The hose carries water from the washer to the gun, and its length sets how far you can walk from the machine. Nozzles set the spray angle, from a tight jet to a wide fan, and the fittings join it all, with the exact thread or quick-connect varying by kit.
Match the fittings before you order
Fittings are where replacement mistakes happen. The Javneo and FIXFANS kits use M22-14mm inlets, while the YAMATIC and GFGD guns use a swivel 3/8 inch quick-connect inlet. The GFGD set adds M22-15mm and M22-14mm adapters and a 3/8 inch quick-connect plug for washers that need them. The lance and nozzle end is a 1/4 inch quick-connect on the Javneo, FIXFANS and YAMATIC kits, so tips, foam cannons and surface cleaners swap across those three. Check the inlet on your washer before you order, and keep the adapter that matches your machine.
Match the rated pressure, and mind the hose
The gun pressure is not the kit pressure. The YAMATIC gun is rated to 4000 PSI while its hose is rated to 3200 PSI, and the Javneo and FIXFANS guns are rated to 5000 PSI while their hoses are rated to 3600 PSI working pressure. In each case the hose sets the working limit, so a gun rated above its hose adds nothing. The FIXFANS hose also lists a 9000 PSI burst pressure, which is the pressure at which the hose fails, not the pressure to work at. Flow matters too: the Javneo and FIXFANS hoses are rated to 8 GPM, with water temperatures up to 140F.
Pick the wand length for the job
Wand length is reach. The GFGD set gives 36, 23 and 10 inch lengths, the Javneo set gives 9, 24 and 40 inch lengths, and the FIXFANS set gives 37.4, 21.7 and 7.1 inch lengths. A short lance suits cars and close work, where control matters more than reach. A long lance reaches gutters, roofs and high siding. Sets with 3 lengths cover both ends of the job.
Use the washer safely
A pressure washer can cut skin and throw grit, so wear eye protection every time you pull the trigger, and never point the wand at people, pets or yourself. Keep the trigger locked when the gun is not in your hand: the GFGD, Javneo and FIXFANS sets all list a safety lock for that. Never run a fuel washer in a closed garage.
Keep electric pressure washers on a GFCI outlet, never point the wand at people or pets, wear eye protection with polishers and chemicals, and read the label before mixing any cleaning products. Read our Safety Disclaimer.
The gear for pressure washer wand parts
The kits below cover the parts above: each pairs a gun with extension wands, and the hose kits add a 25 ft hose, with nozzle tips in the Javneo and FIXFANS kits, so pick the set that matches your fittings and your rated pressure.
FAQ: garage tools
What parts does a pressure washer wand have?
A wand setup has a gun with a trigger, a lance that sets the reach, a hose that feeds it, nozzles that set the spray angle, and the fittings that join them. The hose wears where it drags and kinks.
Are pressure washer wands universal?
No. The lance and nozzle end is a 1/4 inch quick-connect on the Javneo, FIXFANS and YAMATIC kits, but the washer end varies: M22-14mm is common, and some washers need M22-15mm or a 3/8 inch quick-connect. Check the inlet on your washer before you order, and keep the adapter that matches it.
What PSI should a replacement wand handle?
Match the washer, not the job. A gun rated to 5000 PSI adds nothing if its hose is rated to 3600 PSI, since the hose sets the working limit. Pick a set where the hose pressure meets or beats the washer pressure.
How long should a pressure washer wand be?
It depends on the job. Short lances suit cars and close work, mid lengths suit driveways and siding, and long lances reach gutters and roofs. A set with 3 lengths covers all of them, so you can swap the lance for the job at hand.
Can I use a pressure washer gun with a garden hose?
No. All 4 kits here state pressure washer use only, and none fits a garden hose or a standard faucet. A garden hose cannot hold the pressure, and the fittings do not match. Use the gun only with a pressure washer.
Do I need a new hose with a new gun?
Only if the hose is worn or its pressure falls short. A hose that kinks, leaks at the ends or shows wear is due for replacement, and a hose rated below the washer belongs in the spares bin. The Javneo, FIXFANS and YAMATIC kits include a 25 ft hose, so a buyer who needs a hose can pick a kit and be done.
Related: see our pressure washer pump parts guide, our how to fix a pressure washer hose guide, the pressure washer nozzle size chart and our car detailing hub.
