Types of Air Tools for the Home Garage
The types of air tools every home garage uses, from impact wrenches to blow guns, and the figures that tell a light-duty tool from a heavy-duty tool.

On this page
A lug nut that will not move, a bolt buried behind an exhaust manifold, a bracket eaten by rust: these are the jobs that call for air tools. Types of air tools fall into a small set of shop staples, the impact wrench, the air ratchet, the die grinder, the air hammer and the blow gun, all driven by compressed air from a shop compressor and each built for a different kind of garage work. This guide explains what each type does, which figures the maker lists for it, and how to match the tool to the job.
As an Amazon Associate I earn from qualifying purchases. GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: the types of air tools found in most home garage kits, the figures that separate a light-duty tool from a heavy-duty tool, and a checklist to run before a job starts.
Types of Air Tools and What Each Type Does
Types of air tools share a power source, compressed air from a shop compressor, and differ in the work they do at the end of the hose. Some kits bundle them together: VEVOR offers a 71-piece kit with an impact wrench, a ratchet wrench, a die grinder, an air hammer and a blow gun, and a 50-piece kit with the same tools except the die grinder, plus sockets, bits and chisels in a storage case.
| Type | Size or drive | What the maker lists | Garage job |
|---|---|---|---|
| Impact wrench | 1/2-inch drive | 230 ft-lbs of torque (VEVOR) to 1,645 ft-lbs of maximum loosening torque (BESWELL) | Lug nuts and rusted bolts |
| Air ratchet | 3/8-inch or 1/2-inch drive | 3/8-inch drive in VEVOR kits, 1/2-inch drive in the Hoteche kit | Fasteners behind brackets and covers |
| Die grinder | 1/2-inch | High-speed | Grinding, shaping and smoothing metal |
| Air hammer | Chisel set | 4,500 BPM (VEVOR) | Rust removal and chiseling |
| Blow gun | Shop air | Fed by shop air, no rated figure stated | Clearing chips and dust |
Impact Wrench: the Lug Nut Tool
The impact wrench is the air tool a home garage reaches for during a tire rotation or a brake job, turning compressed air into short hammer blows that break loose fasteners.
Torque figures are the numbers to compare. VEVOR rates the impact wrench in its kits at 230 ft-lbs of torque and 7,000 RPM. BESWELL lists 1,180 ft-lbs of maximum loosening torque in its 29-piece kit and 1,645 ft-lbs in its other 29-piece kit, and the BESWELL wrenches use a twin hammer mechanism with a 3-speed forward power regulator and full-power reverse. The BESWELL wrenches weigh 4.62 lbs and 4.84 lbs, with a 7.3-inch composite housing.
The BESWELL kits include 11 SAE sockets from 3/8-inch to 1-inch and 11 metric sockets from 9 mm to 27 mm, plus a 5-inch extension bar, a quick connector and a blow-molded carrying case. For lug nut work, see the guide to the best impact wrench for working on cars and the comparison of mid torque vs high torque impact wrench models.
Air Ratchet: Fastening in Tight Spaces
An air ratchet spins fasteners in spaces where a full-size impact wrench cannot fit, around radiators, water pumps and dashboard parts. It trades torque for reach and speed, so it suits running fasteners in and out rather than breaking loose rusted hardware.
VEVOR combines a 3/8-inch ratchet wrench with a 1/2-inch impact wrench in its dual-wrench kits, and the 19-piece combo adds a 10-piece steel impact socket set: 5 sockets for the impact wrench and 5 for the ratchet. Hoteche combines a 1/2-inch impact wrench with a 1/2-inch air ratchet in its 17-piece kit, with a 10-piece impact socket set from 9 mm to 27 mm in a blow-molded carrying case.
Die Grinder and Air Hammer: Cutting, Shaping and Breaking Rust Free
A die grinder spins a small stone or burr at high speed for shaping metal, smoothing welds and cleaning up edges. The VEVOR 71-piece kit includes a 1/2-inch die grinder with 10 pieces of grinding stones and grinding papers.
An air hammer works the opposite way, with short chisel blows instead of spin. The same VEVOR kit rates its air hammer at 4,500 BPM and includes 3 chisels, which suits rust removal and cutting through seized brackets. The Tradespro 71-piece kit covers the same ground with an air hammer and an air grinder among its tools, and the maker states a 2 year manufacturer warranty for it.
The JEGS kit also bundles an impact wrench, a ratchet wrench, a hammer, a die grinder and a blow gun, and the maker states a warranty term of 30 days for it.
Blow Gun: Cleaning With Shop Air
A blow gun turns shop air into a cleaning tool, clearing chips from a drilled hole, dust from a workbench and grit from a brake job before reassembly. It rides along in the 71-piece VEVOR kit and the 50-piece VEVOR kit. Keep the nozzle pointed away from skin, eyes and people.
Air Tool Checklist Before a Job
- Oil the tool. VEVOR advises applying lubricating oil before use, and the Hoteche and BESWELL kits include a mini oiler or an oil bottle.
- Check the fittings. Match the hose coupler to the tool’s air inlet: VEVOR lists a 1/4-inch NPT air inlet and a working pressure of 90 PSI for its dual-wrench combo.
- Fit the right socket. Use impact-rated sockets on an impact wrench, in the sizes the kit lists.
- Clear the work area. Keep flammables away from grinding sparks, and keep the hose clear of foot traffic.
- Wear eye protection. Grinding, chiseling and blowing dust throw chips into the air.
What Air Tools Need From a Compressor
Every air tool in this guide runs on compressed air, so the compressor matters as much as the tool. VEVOR lists a working pressure of 90 PSI and a 1/4-inch NPT air inlet for its dual-wrench combo, and that pressure figure is the starting point: the tool needs the pressure its maker states, delivered through a hose and fittings that match its inlet. Check the manual of each tool for its stated pressure and air demand, and size the compressor for the tool with the highest stated demand in the kit. The guide to the best air compressor for air tools compares shop compressors for this work, and what air compressor CFM means explains air demand, with CFM vs PSI for the pressure side.
How to Pick the Right Air Tool Kit
Kits suit a home garage that needs several air tools at once, and the piece count says how much comes in the case. VEVOR lists a 71-piece kit at 16.98 pounds and a 50-piece kit at 16.31 pounds, while its dual-wrench combo weighs 11.35 pounds. The BESWELL 29-piece kits weigh 12.7 and 12.9 pounds, the Tradespro 71-piece kit weighs 18.81 pounds, and the JEGS kit weighs 16.45 pounds.
Match the kit to the jobs ahead: tire and suspension work calls for impact wrench torque, engine bay work calls for a compact ratchet, and rust calls for a hammer and a grinder. Check the warranty terms the maker states: the Tradespro kit carries a 2 year manufacturer warranty and the JEGS kit a warranty term of 30 days. The air tools hub gathers the guides for each type.
Wear eye protection with every air tool, use impact-rated sockets on impact wrenches, disconnect the air line before changing accessories, and finish lug nuts with a torque wrench to the vehicle's spec. See OSHA eye and face protection. Read our Safety Disclaimer.
Air Tools vs Cordless Tools
Air tools and cordless tools split the same garage jobs by power source. An air tool stays light in the hand because the compressor sits on the floor, and it runs as long as the compressor keeps up, while a cordless tool carries its battery and runs until the charge ends. The trade is the hose and the compressor: air tools need shop air, a hose and fittings. For fastening work without a compressor, see the best impact wrench picks, which cover cordless models.
FAQ: garage tools
What air tools does a home garage need?
An impact wrench for lug nuts and rusted bolts, an air ratchet for fasteners in tight spaces, and a blow gun for cleanup, then add a die grinder and an air hammer when rust and fabrication work calls for them. Some kits bundle several of these together: the VEVOR 71-piece kit includes an impact wrench, a ratchet wrench, a die grinder, an air hammer and a blow gun, and the 50-piece kit includes the same tools except the die grinder.
What size impact wrench suits lug nut work?
A 1/2-inch drive impact wrench is the size the kits in this guide use for lug nut work. Torque figures run from 230 ft-lbs in the VEVOR kit wrench to 1,180 ft-lbs and 1,645 ft-lbs in the BESWELL kit wrenches.
What PSI do air tools need?
Check the manual of each tool. VEVOR lists a working pressure of 90 PSI for its dual-wrench combo, and the pressure a tool needs is the figure its maker states for that tool.
Do air tools need oil?
Yes: VEVOR advises applying lubricating oil before use, and the Hoteche kit includes a mini oiler while the BESWELL kits include a mini in-line oiler and an oil bottle. Follow the manual for the oiling schedule of each tool.
Related: air tools hub, the best air compressor for air tools, the best impact wrench for working on cars and what air compressor CFM means.




