Windshield Washer Hose Repair Kit: Hose and Connectors
A 4 m rubber hose and T, Y and I connectors replace an aging washer hose and reconnect the pump to the nozzles.
On this page
The washer fluid is full, the pump hums, and nothing reaches the glass. A split or cracked hose is one cause to check, and the fix is a short length of rubber hose and the right connector, not a new pump. A windshield washer hose repair kit is a length of washer hose plus the connectors that join the pump to the nozzles, so you can cut out the bad section and join the line back together.
As an Amazon Associate I earn from qualifying purchases. GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
| # | Product | Shop Score | Buy |
|---|---|---|---|
| 1 |  Windshield Washer Hose Kit | 9.6/10 | Buy on Amazon |
| 2 |  Windshield Washer Hose Kit | 9.6/10 | Buy on Amazon |
| 3 |  Windshield Washer Hose Kit | 9.6/10 | Buy on Amazon |
Windshield Washer Hose Kit
A 4 m flexible rubber washer hose with 30 leak-proof connectors, 10 each of T, Y and I shapes, for connecting the pump and the nozzles.
Pros
- 30 connectors: 10 T, 10 Y and 10 I shapes
- Rubber resists cracking, aging and low-temperature freezing
- Hose trims to fit, with 0.27 in outer and 0.17 in inner diameter
- No special tools needed for install
Cons
- No warranty term is stated
- No temperature figure is stated for the freeze resistance
- Spec table lists 1 item for a kit that holds a hose and 30 connectors
- A second kit is needed if the run is longer than 4 m
Windshield Washer Hose Kit
A 4 m rubber washer hose with 12 connectors, 4 each of T, Y and I shapes, for replacing an aging hose between the pump and the nozzles.
Pros
- 12 connectors: 4 T, 4 Y and 4 I shapes
- Hose stated in both mm and inches: 6.8 mm outer, 4.3 mm inner
- Soft, elastic rubber, strong and durable
- Fits most cars, SUVs and trucks
Cons
- No warranty term is stated
- Spec table lists 12 items while the package holds a hose and 12 connectors
- No freeze or temperature figure is stated
- Only 12 connectors, so a complex layout needs more
Windshield Washer Hose Kit
A 4 m rubber washer hose with 12 connectors, 4 each of T, Y and I shapes, that cuts to fit the run between the pump and the nozzles.
Pros
- 12 connectors: 4 T, 4 Y and 4 I shapes
- Hose cuts to fit, 4 m long
- Sizes stated in mm and inches: 6.8 mm outer, 4.3 mm inner
- Soft, elastic rubber for long term use
Cons
- No warranty term is stated
- Color field lists black and white, with no white part described
- No freeze or temperature figure is stated
- Only 12 connectors, so a complex layout needs more
Windshield washer hose repair kit: what comes in the box
Every kit here holds a 4 m length of rubber washer hose and a set of connectors. The hose runs from the pump to the nozzles, and the connectors join hose ends and branch the line where the washer system splits. The Patonu and SmaringWing kits include 12 connectors, 4 T type, 4 Y type and 4 I type, while the Meidier kit includes 30 connectors, 10 of each type. Cut the hose to the length the run needs, push the ends onto the connectors, and the line is joined.
Hose size: check the diameters before you buy
Washer hose is sold by its outside and inside diameter, and the listings here state both figures. The Patonu listing states an outer diameter of 6.8 mm, or 0.267 in, and an inner diameter of 4.3 mm, or 0.169 in. The Meidier listing states an outer diameter of 0.27 in and an inner diameter of 0.17 in, and the SmaringWing listing states the same 6.8 mm outer and 4.3 mm inner diameters, or 0.27 in and 0.17 in. All three hoses are 4 m long, and the Meidier and SmaringWing listings state the hose cuts to fit. Measure the old hose before ordering, and check the size the listing states.
Connectors: T, Y and I, and where each one goes
The connectors join hose ends and split the line. A straight I connector joins two hose ends in a line, a T connector branches the line to a second nozzle, and a Y connector splits the line at an angle. The Meidier kit carries 10 of each type, for 30 connectors in all, while the Patonu and SmaringWing kits carry 4 of each type, for 12 in all. Count the joints and branches on the old line before ordering, so the kit holds the shapes the job needs.
What to check before you order
Check three things before ordering. First, the hose diameters: the listings here state outer diameters of 0.267 in or 0.27 in and inner diameters of 0.169 in or 0.17 in, so compare those figures with the old hose. Second, the connector shapes: count the straight joints and the branches on the old line, and match them with T, Y and I connectors. Third, the length: every hose here is 4 m long, and the Meidier and SmaringWing listings state the hose cuts to fit, so measure the run from the pump to the farthest nozzle and leave slack for the bends.
Rubber hose, winter and summer
All three kits use soft, elastic rubber hose. The Meidier listing states its rubber resists cracking, aging and low-temperature freezing, and works in winter frost and summer heat. The Patonu listing describes its hose as soft and elastic, strong and durable, and the SmaringWing listing describes its hose the same way. A hose that stays flexible in the cold is easier to fit, and a cracked hose is the leak to look for when the spray fails.
Windshield washer hose repair kits for the job: the kits in this guide
The kits below cover the washer hose kits in this guide, from the 30-connector kit to the two 12-connector kits, so you can match the hose size and the connector shapes to the line under the hood.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
FAQ: garage tools
What is in a windshield washer hose repair kit?
A length of washer hose and a set of connectors. The kits here hold a 4 m rubber hose and T, Y and I connectors: 12 connectors in the Patonu and SmaringWing kits, and 30 connectors in the Meidier kit. The hose connects the pump to the nozzles, and the connectors join hose ends and branch the line.
What size is windshield washer hose?
The kits in this guide state an outer diameter of 0.27 in and an inner diameter of 0.17 in, with the Patonu listing giving 0.267 in outside and 0.169 in inside. Every hose here is 4 m long, and the Meidier and SmaringWing listings state the hose cuts to fit. Measure the old hose and check the size the listing states before ordering.
How do I know if the washer hose is the problem?
If the pump runs and the reservoir is full but no fluid reaches the glass, look for a split, crack or loose joint in the hose. The listings describe replacing an aging hose and reconnecting the pump to the nozzle to restore the spray. Check the hose and the connectors before replacing the pump or the nozzles.
Can I cut the washer hose to fit?
Yes. The Meidier listing says the hose trims to fit, and the SmaringWing listing says you can cut the hose to fit your actual needs. Measure the run first, then cut.
Do I need special tools to replace a washer hose?
The Meidier listing states no special tools are needed to connect the pump and the nozzle, and the Patonu and SmaringWing listings describe the kits as easy to replace and install. Check the joints for leaks when the line is back together.
Related: the windshield repair kit guide, the air hose repair kit guide, our best automotive hose clamps picks, our best hose clamps picks, our best car window cleaner picks and our engine and shop equipment hub.
