Best 110V Portable Stick Welder: 5 Picks for Home and Farm

Compare the picks

Specifications are manufacturer rated, as published on each listing and collected 20 October 2026. “Not stated” means the listing does not give the figure.

How we scored them

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

Best 110v portable stick welder: amps and weight

Max amps run 120A to 250A. The HGNVGZ and WRDLOSY state 250A peak; the WRDLOSY notes 150A effective output at 110V. The Hpoouo states 20 to 200A; the TOOLIOM states 135A; the HONE states an actual 120A. Weights: the WRDLOSY at 3 lb, the HGNVGZ and Hpoouo at 3.7 lb, the TOOLIOM at 4.4 lb and the HONE at 5.8 lb. All five are stated 110V input; the TOOLIOM warns that connecting to 220V will cause damage and fire risk.

Duty cycle and circuits

Only the HGNVGZ states a duty cycle: 60% at 250A. The HGNVGZ states it requires a standard 20A household circuit breaker; the WRDLOSY states max input 15A at 110V and recommends a dedicated 20A circuit. The other three state no duty cycle or circuit figure, so their sustained-output limits are not stated.

Rod types and kit contents

The Hpoouo states the widest rod list: E6013, E6011, E6010, E7018 and E308 at 1/16 to 1/8 in, with polarity notes for acidic versus alkaline rods. The HGNVGZ states E6013, E7018, E6011 and E308; the HONE states E6013, E6011, E6010, E7018 and E308-16; the WRDLOSY states E6010, E6011 and E6013, noting E7018 suits a higher-power machine. The TOOLIOM states 6011 and 6013, plus lift TIG with a separately purchased torch. Kit contents: the Hpoouo and WRDLOSY include 20 rods each with gloves and hammers; the TOOLIOM includes gloves and rods; the HONE states no kit extras.

Amps, current range and what 110V can do

The five picks span a wide amp range on the same household voltage. The Hpoouo ARC-200 lists adjustable current from 20 to 200 amps and welds metal from 0.06 to 0.2 inch thick. The HGNVGZ MMA-250 lists 20 to 250 amps on standard 110V 60Hz household power with a 60 percent duty cycle at 250 amps. The WRDLOSY lists 20 to 250 amps on a digital display but states 150 amps effective output at 110 volts: read the peak figure against the effective one when you compare. The TOOLIOM TL-135S lists 135 amps, and the HONE Sim-Stick 110 lists 120 amps actual.

Thickness ranges cluster together. The Hpoouo states 0.06 to 0.2 inch, the WRDLOSY states 0.06 to 0.2 inch with higher skill needed under 0.06 inch to avoid burn-through, and the HGNVGZ states up to 0.2 inch (5 millimeters). The WRDLOSY states it is not suitable for welding aluminum, and the Hpoouo states that for stainless steel you use E308L-16 rods only. If your work is thin sheet under 0.06 inch, the listings agree: these machines can do it, but skill matters.

Hot start, arc force and anti-stick: what the features do

Every pick here states the same trio of beginner features, and the listings describe what each does. Hot start strikes the arc quickly, arc force keeps the arc stable with deeper penetration, and anti-stick keeps the rod from freezing to the workpiece. The Hpoouo states built-in over-voltage, over-current, over-heating and overload protection plus a high-power fan for heat dissipation. The HGNVGZ states a 360-degree large-area heat dissipation fan with an ABS shell for insulation, plus overheat, overcurrent and overload protection. The HONE states automatic anti-stick, voltage fluctuation compensation, and over current, over heat, over and under-voltage and short circuit protection. The WRDLOSY states over-voltage, over-current and over-heating protection.

Read these as listing claims, not measured results, but the pattern is useful: the machines that state the most protection features are the ones whose listings also describe longer continuous work. The HGNVGZ states its ABS shell lets it weld continuously without overheating shutdowns, and the Hpoouo states the fan prolongs service life.

Circuits and the 110V-only warning

Household power has limits and the listings state them. The HGNVGZ requires a standard 20-amp household circuit breaker for reliable operation. The WRDLOSY states a maximum input of 15 amps at 110 volts and recommends a dedicated 20-amp circuit for best results. If your garage outlet shares a circuit with other loads, the listings point to the same answer: a dedicated 20-amp circuit.

The TOOLIOM carries the strongest warning of the five: the welder is for 110-volt input only, and connecting to 220 volts will cause immediate damage and fire risk, with the listing telling you to check your outlet before use. All five are 110-volt machines, but only the TOOLIOM states the miswiring consequence this bluntly. Dual-voltage buyers should note that none of these five lists 220-volt operation.

Weight and portability

These are genuinely carryable machines. The WRDLOSY states 3 pounds for the machine only and 7.7 pounds with the full accessory kit. The Hpoouo states 3.7 pounds at 7.8 by 3.9 by 5.3 inches, fitting in a backpack or toolbox. The HGNVGZ states 3.7 pounds with a shoulder strap. The TOOLIOM title states a 4.4-pound design with an adjustable shoulder strap, though its spec table says 8.73 pounds: trust the title and bullets. The HONE states 5.8 pounds with a handle or included shoulder strap.

For rooftop, farm or at-height work, the shoulder strap listings matter: the TOOLIOM, HGNVGZ and HONE all state one. The Hpoouo and WRDLOSY emphasize toolbox and backpack size instead. Either way, every pick here is stated under 6 pounds for the machine.

Kits and what is not included

The kits differ more than the machines. The Hpoouo includes 20 welding rods, 2 chip hammers and a pair of welding gloves right out of the box, plus a 24-hour customer service line. The WRDLOSY includes 20 welding rods, gloves, a brush, an electrode holder, an earth clamp and a chipping hammer/brush, with US-based support, but states the welding helmet is not included. The TOOLIOM includes gloves and rods with a shoulder strap, but its 2-in-1 MMA and Lift TIG function needs a lift TIG torch that is not included: the listing names the TL-WP-17V-10-25 to buy from TOOLIOM. The HGNVGZ states it works with 1/16 to 1/8 inch rods but does not state rods in the box. The HONE states a handle or shoulder strap included and no other kit contents.

Add a helmet to every option: the WRDLOSY is the only listing that states it explicitly, but none of the five includes one. The WRDLOSY also gives a maintenance note the others do not: periodically clear dust from the cooling vents and check the fan.

Polarity and rod notes from the listings

Two listings give polarity guidance worth reading before the first arc. The Hpoouo states that its included rods are acidic rods, so the electrode holder connects to the positive terminal and the earth clamp to the negative, and that alkaline rods need the opposite terminals. The WRDLOSY gives the same guide: holder to positive and clamp to negative for acidic rods, reversed for alkaline rods. Both listings also describe which rod families each machine supports, with the Hpoouo stating its rods cover the common types in 1/16 to 1/8 inch (1.6 to 3.2 millimeter) sizes.

One limit to note: the WRDLOSY states that for alkaline rods like E7018, a higher-power machine is recommended for best results. So if your work runs heavily on that rod family, the 150-amp effective output it states at 110 volts is the figure to weigh, not the 250-amp peak.

Frequently Asked Questions

Which is the lightest?

The WRDLOSY at a stated 3 lb. The HGNVGZ and Hpoouo state 3.7 lb; the TOOLIOM 4.4 lb; the HONE 5.8 lb.

Which state a duty cycle?

Only the HGNVGZ at a stated 60% at 250A. The other four state no duty cycle figure.

Which weld aluminum?

None. The WRDLOSY explicitly states it is not suitable for welding aluminum.

Which include rods?

The Hpoouo and WRDLOSY include 20 rods each; the TOOLIOM includes rods; the HGNVGZ and HONE state no rod count.

Related: the best stick welder for farm use picks.

More picks: browse engine and shop equipment.