Best Stick Welder for Farm Use: 5 Picks for Farms

Compare the picks

Specifications are manufacturer rated, as published on each listing and collected 20 October 2026. “Not stated” means the listing does not give the figure.

How we scored them

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

Best stick welder for farm use: amps and voltage

Amps run 135 to 250 here. The S7 is the top pick on output: 250A with dual 110V/220V, stated for 110V on light home repairs and 220V for heavier farm work. The YESWELDER 205 is 205A at 110V/220V with hot start and arc force adjustable over 1 to 10 levels. The ARCCAPTAIN is 200A at 110V/220V with synergic control. The Hpoouo is 200A on 110V only, adjustable 20 to 200A for 0.06 to 0.2 in thickness. The YESWELDER 135 is 135A on 110V only, tackling mild steel up to 3/32 in (2.5mm). For farm work where 220V is available, the dual-voltage three suit more; for field work off a 110V outlet, the two 110V picks run anywhere.

Stick features and kit contents

All five state hot start, arc force and anti-stick. The YESWELDER 205 states compatibility with 6010, 6011, 6013 and 7018 rods. The Hpoouo states support for E6013, E6011, E6010, E7018 and E308 rods in 1/16 to 1/8 in, and includes 20 rods, 2 chip hammers and a pair of gloves in the box. The ARCCAPTAIN states good performance on 6010, 6011, 6013 and 7018 rods, with stick or lift TIG mode. The S7 states compatibility with E6010, E6011, E6013, E7018 and other common rods, and is stated as a practical choice for gates, fences, trailer parts and mower decks. The YESWELDER 135 is the 3-in-1: gasless flux core MIG, stick and lift TIG, with extra E71T-GS flux core wires included. Weights run 3.7 to 11.4 pounds on the bullet figures: the Hpoouo at 3.7 lb, the ARCCAPTAIN at 7.2 lb, the YESWELDER 205 at 8.4 lb and the YESWELDER 135 at 11.4 lb. Note the YESWELDER 135 spec table states 18.3 pounds against the bullet-stated 11.4 lb; the bullets win.

Listing notes

Warranty terms are stated on two listings: the ARCCAPTAIN states a 2-year quality service alongside stated TÜV and ANSI certifications, and the S7 states a 2-year warranty. The YESWELDER 135, YESWELDER 205 and Hpoouo state no warranty term. The Hpoouo states 24-hour online customer service. Safety protections are stated on four: the YESWELDER 135 states over-current, over-load and over-heating protections; the YESWELDER 205 states overcurrent, overload, temperature control and thermal overload protection; the Hpoouo states over-voltage, over-current, over-heating and overload protection; the ARCCAPTAIN states over current, over voltage, overload and overheating protection.

Rod types: what the listings state

Which rods each listing supports

The rod lists differ. The YESWELDER 205 states compatibility with most 6010, 6011, 6013 and 7018 welding rods. The Hpoouo states support for AWS E6013, E6011, E6010, E7018 and E308 in 1/16 to 1/8 in (1.6mm to 3.2mm), and adds that for stainless steel, E308L-16 rods only should be used. The ARCCAPTAIN states good performance on 6010, 6011, 6013 and 7018 rods. The S7 states E6010, E6011, E6013, E7018 and other common rods. The YESWELDER 135 includes extra E71T-GS flux core wires in .030 and .035 in for its MIG side rather than a stick rod list.

Acidic versus alkaline rods on the Hpoouo

The Hpoouo listing gives the one rod-setup detail of the five: since the kit’s included rods are acidic, the electrode holder and earth clamp connect to the plus and minus terminals respectively, while alkaline rods need the opposite terminal arrangement. No other listing states terminal polarity guidance. If you switch rod types mid-project, the Hpoouo is the only listing that tells you how to rewire for it.

Rod diameter limits

Stated rod diameter support: 1/16 to 1/8 in on the Hpoouo. The YESWELDER 135 tackles mild steel up to 3/32 in (2.5mm) thick at 135A. The other three state no rod diameter or thickness limit, so treat their limits as not stated rather than unlimited.

Voltage and portability in practice

Dual voltage versus 110V only

Three run dual 110V/220V: the ARCCAPTAIN, the S7 and the YESWELDER 205. The YESWELDER 135 and the Hpoouo run 110V only. The YESWELDER 135 is rated 2.7 KW at 135A, and the YESWELDER 205 is rated 5 kwh in the spec table. For a farm with only 110V outlets in the barn, the two 110V picks run anywhere; where a 220V circuit exists, the dual-voltage three give stronger, more stable welding on heavier tasks per the S7 listing.

Weight and carrying

Bullet-stated weights run 3.7 to 11.4 lb: the Hpoouo at 3.7 lb in a 7.8 by 3.9 by 5.3 in body that fits a backpack or toolbox, the ARCCAPTAIN at 7.2 lb with a handle and shoulder strap included, the YESWELDER 205 at 8.4 lb with a carry handle, and the YESWELDER 135 at 11.4 lb with a metal carrying handle. Note the spec-table contradictions: the YESWELDER 135 table states 18.3 pounds and the Hpoouo table states 7.85 pounds, against the bullet figures; the bullets win. The S7 states no weight figure.

Hot start and arc force details

Hot start and arc force are stated on all five, but only the YESWELDER 205 quantifies them: 1 to 10 levels of adjustment for both, with anti-stick keeping the electrode from freezing in the puddle. The ARCCAPTAIN states synergic control that matches current and voltage after the rod diameter is selected, plus adjustable hot start and arc force. The YESWELDER 135 states synergic control with plus or minus 3V micro-adjustment. The Hpoouo states IGBT inverter control that adjusts output current in microseconds. For a beginner, the synergic control on the YESWELDER 135 and ARCCAPTAIN is the feature that removes voltage guesswork.

What to check before buying

Match amps to the thickest metal: 135A suits up to 3/32 in mild steel per the YESWELDER 135, 200A picks cover general farm repair, and 250A on the S7 covers the heaviest tasks. Check the rod list against the rods on your shelf: E6010 through E7018 coverage is stated on three picks, E308 only on the Hpoouo. Check the warranty: the ARCCAPTAIN’s 2-year quality service and the S7’s 2-year warranty are the only stated terms. And check the outlet: dual-voltage picks only help if 220V is wired where you weld.

Frequently Asked Questions

Which is the most powerful?

The S7 at a stated 250A, dual 110V/220V. The YESWELDER 205 states 205A and the ARCCAPTAIN 200A, both dual voltage.

Which run on 110V only?

The YESWELDER 135 at 135A and the Hpoouo at 200A. Both suit field work off a standard outlet.

Which also welds MIG and TIG?

The YESWELDER 135 is a 3-in-1: gasless flux core MIG, stick and lift TIG. The YESWELDER 205 and ARCCAPTAIN offer stick and lift TIG.

Which include rods or extras?

The Hpoouo includes 20 rods, 2 chip hammers and gloves. The YESWELDER 135 includes extra E71T-GS flux core wires.

Which state a warranty?

The ARCCAPTAIN states a 2-year quality service and the S7 a 2-year warranty. The other three state no warranty term.

Related: our best air die grinder for weld cleanup.

More picks: browse engine and shop equipment.