Best Motorcycle Lift Under $200 (2026): 5 Scissor Jacks Compared
Five motorcycle lifts under $200 compared by capacity, lift height, platform size and warranty, using only what each listing states.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Best OverallOMT 1100 lb Scissor Jack9.6/10View on Amazon - 2
Highest CapacityVEVOR 1200 lb Scissor Jack9.6/10View on Amazon - 3
Hydraulic PickVIVOHOME 350 lb Hydraulic Lift9.4/10View on Amazon
An oil change on a cruiser means getting the bike level and the drain plug reachable without lying on cold concrete. A chain adjustment means spinning the rear wheel freely while you check slack. The best motorcycle lift under 200 solves both: a scissor jack or small lift table that raises the bike to a comfortable working height in a home garage. We compared five listings by capacity, lift height, platform size and warranty, using only what each listing states.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall OMT 1100 lb Scissor Jack: 1100 lb capacity, 5 lock holes and a 1 year warranty, the most complete listing of the five. Check price on Amazon
- Highest Capacity VEVOR 1200 lb Scissor Jack: 1200 lb capacity with a 4.1 to 15 in height range, the strongest rating here. Check price on Amazon
- Hydraulic Pick VIVOHOME 350 lb Hydraulic Lift: Foot-operated hydraulic lift to 30.9 in with 4 casters, for dirt bikes up to 350 lb. Check price on Amazon
The picks
OMT Motorcycle Lift, 1100lb Scissor Jack Stand
An 1100 lb scissor jack with a wide deck, T-handle and 3/8 in socket drive, 5 lock holes and a 1 year warranty, the most complete listing of the five.
Pros
- 1100 lb capacity stated for cruisers and dirt bikes
- 5 lock holes for a mechanical lock at height
- T-handle and 3/8 in socket drive included
- 1 year warranty stated by the maker
Cons
- Height figures conflict: 3.7 to 14.6 in in title and bullets, 13.8 in max and 4 in min in the spec table
- 28.4 lb, heavier than the VEVOR 1100
- No ALI or other safety certification stated
- Plastic and rubber in the materials list
VEVOR Motorcycle Lift, 1200 lbs Capacity
A 1200 lb scissor jack with a 4.1 to 15 in height range, six-hole security pin and wide anti-slip platform, the highest capacity rating of the five.
Pros
- 1200 lb capacity, the highest stated figure here
- 4.1 to 15 in height range stated
- Six-hole security pin for locking at height
- 14.2 by 8.7 in platform with deepened anti-slip rubber
Cons
- No warranty term stated
- 32.4 lb, the heaviest of the five
- No ALI or other safety certification stated
- Iron construction with no coating detail stated
Motorcycle Lift Scissor Jack
A 1200 lb scissor jack with a 3 1/2 to 14 3/4 in lift range, wide rubber-padded platform and crank handle, the 1200 lb pick with the lowest weight here.
Pros
- 1200 lb capacity stated
- 3 1/2 to 14 3/4 in lift range stated
- 9.06 by 14.57 in platform with rubber pad
- 13.49 kg, the 1200 lb pick with the lowest weight here
Cons
- No warranty term stated
- No lock hole or pin count stated
- No ALI or other safety certification stated
- 7/8 socket size is unusual; check your tools
VIVOHOME 350 Lbs Hydraulic Motorcycle Lift Table
A foot-operated hydraulic lift table for dirt bikes up to 350 lb, lifting from 12 to 30.9 in on 4 swivel casters, with a 1 year warranty.
Pros
- Foot-operated hydraulic lift, no cranking
- 12 to 30.9 in lift height, the tallest here
- 4 swivel casters, 2 with locks, for moving the bike
- 1 year warranty stated by the maker
Cons
- 350 lb capacity, the lowest stated figure here
- For dirt bikes and mini bikes, not heavy cruisers
- 38.3 lb, heavy to move without the wheels
- No ALI or other safety certification stated
VEVOR Motorcycle Lift, 1100 lbs Motorcycle Scissor
An 1100 lb scissor jack with a 3.74 to 13.38 in height range, locking pin and wide non-slip platform, a lighter VEVOR alternative to the 1200 lb model.
Pros
- 1100 lb capacity stated
- Locking pin holds the height
- 14.56 by 9.05 in non-slip platform
- 29.3 lb, lighter than the VEVOR 1200
Cons
- No warranty term stated
- 13.38 in max height, the lowest maximum here
- No ALI or other safety certification stated
- Q235B steel with no coating detail stated
Compare the picks
| Model | Capacity | Lift height | Platform | Weight | Warranty |
|---|---|---|---|---|---|
| OMT 1100 lb Scissor Jack | 1100 lb | 3.7 to 14.6 in | 9.1 x 14.6 in | 28.4 lb | 1 year |
| VEVOR 1200 lb Scissor Jack | 1200 lb | 4.1 to 15 in | 14.2 x 8.7 in | 32.4 lb | Not stated |
| Donext 1200 lb Scissor Jack | 1200 lb | 3 1/2 to 14 3/4 in | 9.06 x 14.57 in | 13.49 kg | Not stated |
| VIVOHOME 350 lb Hydraulic Lift | 350 lb | 12 to 30.9 in | 15 x 11.4 in | 38.3 lb | 1 year |
| VEVOR 1100 lb Scissor Jack | 1100 lb | 3.74 to 13.38 in | 14.56 x 9.05 in | 29.3 lb | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 22 October 2026. “Not stated” means the listing does not give the figure.
How we scored them
Each lift is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None of the five listings states an ALI certification or other safety listing, so every lift scores zero on safety. Two listings state a 1 year warranty; the other three state no warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OMT 1100 lb Scissor Jack | 9.6 | 27 | 20 | 20 | n/a | 3 |
| VEVOR 1200 lb Scissor Jack | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Donext 1200 lb Scissor Jack | 9.6 | 29 | 20 | 20 | n/a | 0 |
| VIVOHOME 350 lb Hydraulic Lift | 9.4 | 22 | 19 | 18 | n/a | 3 |
| VEVOR 1100 lb Scissor Jack | 9.4 | 28 | 20 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
Four of the five are manual scissor jacks; one is a foot-operated hydraulic lift table. Stated capacities run from 350 lb to 1200 lb, and stated lift heights from 3.5 in at the low end to 30.9 in at the top. The two 1200 lb picks come from VEVOR and Donext; the two 1100 lb picks come from Orion Motor Tech and VEVOR. Platform sizes cluster around 9.06 by 14.57 in, with the hydraulic table slightly larger at 15 by 11.4 in. Three listings state no warranty term, and the two that do both state 1 year. None states an ALI certification, a minimum ceiling height or a concrete requirement, so check your garage against the maker’s manual before the first lift. The OMT listing is the only one with conflicting figures: its title and bullets state 3.7 to 14.6 in, while its spec table states 13.8 in maximum and 4 in minimum.
Buying guide: best motorcycle lift under 200
Capacity decides which bike it can hold
Match the stated capacity to your bike’s weight with margin to spare. The two 1200 lb picks suit heavy cruisers and touring bikes; the 1100 lb picks suit most street bikes and lighter cruisers; the 350 lb hydraulic table is for dirt bikes and mini bikes only. A lift rated below your bike’s weight is not a bargain.
Lift height and the jobs you do
Scissor jacks lift from under 4 in to about 15 in, which covers oil changes, chain work and wheel removal on most bikes. The hydraulic table lifts from 12 to 30.9 in, a more comfortable height for longer jobs, but it needs more floor space and a bike light enough for its 350 lb rating. Check the minimum height too: a jack that will not slide under your bike’s frame is useless.
Locking and stability
Every pick here has some form of lock: 5 lock holes on the OMT, a six-hole pin on the VEVOR 1200, a locking pin on the VEVOR 1100 and the VIVOHOME table. Use the lock every time, on solid level ground, and never get under a vehicle supported only by a jack. A wide platform with a rubber or textured surface keeps the bike from shifting while you work.
Scissor jack vs hydraulic table
Four picks are manual scissor jacks: you turn a crank or T-handle to drive the lead screw and raise the platform. They are simple, with no hydraulics to leak and no pedals to pump, and they fold flat for storage. The fifth is a foot-operated hydraulic table that lifts higher and rolls on casters, but it only handles 350 lb and costs more floor space. If your bike is a dirt bike or mini bike and you want to move it around the garage while raised, the hydraulic table is the only pick that does that. For heavier bikes, a scissor jack is the practical choice in this price band.
Warranty and what is missing
Two listings state a 1 year warranty; three state none. No listing here states an ALI certification, so none earns safety points. Read the listing for what it does not say as well as what it does: missing lock details, missing coating information and conflicting height figures are all reasons to look closer before buying.
Check the lift's rated capacity against your heaviest vehicle, and its ceiling and concrete requirements (thickness and strength) before you buy. Install it exactly as the manufacturer specifies, use the mechanical locks before you go under, and look for ALI certification on the model. See the Automotive Lift Institute (ALI). Read our Safety Disclaimer.
Garage Fit Check
- Floor space: the scissor jacks fold flat for storage; the hydraulic table needs room for its 15 by 11.4 in platform plus the 4 casters.
- Power: all five are manual or foot-operated; no outlet or air supply is needed.
- Bike fit: check your bike’s weight against the stated capacity and your frame clearance against the stated minimum height before ordering.
- First job: check the lock mechanism with the bike’s weight on it before putting any part of yourself under the raised bike.
Frequently Asked Questions
What capacity motorcycle lift do I need?
Choose a lift rated above your bike’s weight. The listings here state 350 lb to 1200 lb; heavy cruisers need the 1200 lb picks, while dirt bikes fit the 350 lb hydraulic table.
Can a scissor jack lift a heavy cruiser?
The 1200 lb scissor jacks list that capacity for cruisers and touring bikes. Check your bike’s actual weight against the stated figure and use the locking pin every time.
Do I need a hydraulic lift or is a scissor jack enough?
A scissor jack handles oil changes, chain adjustments and wheel work on most bikes. The hydraulic table lifts higher and rolls on casters, but only to 350 lb. Match the tool to the bike and the job.
Are these lifts safe to use alone?
Use the mechanical lock on every lift, work on solid level ground, and never get under a vehicle supported only by a jack. None of these listings states an ALI certification.
What is the difference between the two VEVOR jacks?
The 1200 lb model states a higher capacity and a 4.1 to 15 in range with a six-hole pin; the 1100 lb model states a 3.74 to 13.38 in range with a single locking pin and weighs less. Neither states a warranty.
Related: our car lift vs motorcycle lift comparison, the best motorcycle lift for low ceiling guide, and our best floor jack for oil changes.
