Best Floor Jack for Oil Changes (2026)
Five jacks and lifting helpers for driveway oil changes, compared by rated capacity, lift range, stated safety standards and warranty.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Best OverallANTPOWER 2 Ton Floor Jack9.7/10View on Amazon - 2
Best CompactPro-Lift T-9456 Scissor Jack9.5/10View on Amazon - 3
Best PoweredVEVOR 5 Ton Electric Car Jack9.4/10View on Amazon - 4
Best AccessoryLIFSHP Magnetic Jack Pad9.3/10View on Amazon - 5
Bonnlo 3 Ton Low Profile Floor JackView on Amazon - 6
Pro-Lift Low Profile Floor Jack Color GreyView on Amazon - 7
BIG RED Hydraulic Trolley Service/Floor Jack with Extra SaddleView on Amazon - 8
ARCAN 3-Ton Aluminum Low Profile Floor JackView on Amazon
It is Saturday morning and the oil is due. The drain pan is out, the new filter waits on the bench, and the only thing between you and clean oil is getting the front of the car safely in the air. The best floor jack for oil changes lifts high enough to reach the drain plug, slides under a low front end, and sits steady while you work. This guide compares five by rated capacity, lift range, stated safety standards and warranty.
An oil-change jack has a specific job: lift one corner high enough to reach the drain plug, then hold steady on the stands while you work. That means checking three figures on the listing: the rated capacity, the lift range, and the minimum saddle height. The five picks here span 3000 lb (1.5 ton) to 5 ton (11023 lb) of capacity, with lift ranges from a 12 Inch trolley jack to 3-3/4 in to 15-1/8 in on a scissor jack.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall ANTPOWER 2 Ton Floor Jack: 2 ton (4,400 lb), 5.31 in to 13 in range, ASME and GS standards, 1-year warranty. Check price on Amazon
- Best Compact Pro-Lift T-9456 Scissor Jack: 3000 lb scissor jack, 3-3/4 in to 15-1/8 in range, meets or exceeds ANSI/PALD standards. Check price on Amazon
- Best Powered VEVOR 5 Ton Electric Car Jack: 5 ton (11023 lb) electric jack with impact wrench, inflator pump and LED light. Check price on Amazon
- Best Accessory LIFSHP Magnetic Jack Pad: A 4 ton aluminum magnetic pinch-weld pad that protects sills while a jack lifts the car. Check price on Amazon
The picks
ANTPOWER 2 Ton Floor Jack
A 2 ton (4,400 lb) low-profile steel floor jack with a 5.31 in to 13 in lift range, quick-lift pump, protective rubber saddle, two-piece handle and ASME and GS safety standards.
Pros
- 2 ton (4,400 lb) capacity covers sedans, SUVs, MPVs, station wagons and light trucks
- Low-profile 5.31 in minimum height slides under sports cars and compact sedans
- Constructed to ASME and GS safety standards
- Rubber saddle, two-piece handle and four casters for easy positioning
Cons
- Bullets claim a limited 1-year warranty while the spec table says 2 years
- 43.2 lb net weight is heavy to carry far
- Steel body, not aluminum, so it weighs more than alloy jacks
- No carry case is listed
Pro-Lift T-9456 Scissor Jack, Grey
A 3000 lb (1.5 ton) scissor jack with a 3-3/4 in to 15-1/8 in lift range, an extra-wide base and ANSI/PALD standards.
Pros
- 3000 lb (1.5 ton) capacity handles most cars
- Extra-wide base for stability, per the listing
- Meets or exceeds ANSI/PALD standards
- Compact alloy steel body stores flat in the trunk
Cons
- Ninety (90) day limited warranty is short
- No wheels or quick-lift pump
- Manual scissor action takes more effort than hydraulic
- No rubber saddle or pinch-weld adapter listed
Pro-LifT F-2315PE Grey Hydraulic Trolley Jack Car
A 3,000 lb capacity hydraulic trolley car jack with all-welded steel frame, 5.25 to 12 inch lift range, steel casters and blow molded case.
Pros
- 3,000 lb capacity for cars and light trucks
- Low 5.25-inch minimum saddle height
- All welded steel frame construction with rust-resistant finish
- Includes blow molded case and 1-year warranty
Cons
- Maximum lifting height is limited to 12 inches
- Title lists grey while spec table notes black finish
- No ASME PASE certification stated on the listing
- 18 pounds total weight
VEVOR Electric Car Jack 5 Ton with Electric Impact
5-ton electric car jack kit with impact wrench and inflator pump, 6.1 to 17.7 in lift, 12V powered.
Pros
- 5 ton (11,023 lb) capacity
- Kit includes impact wrench and inflator pump
- 12V power, 13 ft cord
- LED light for night work
Cons
- 17.7 in maximum is the lowest here
- 18 lb kit, but the jack alone is small
- Must be used on flat surfaces
- Not a true floor jack for shop use
Universal Aluminum Magnetic Grooved Pinch Weld
A 4 ton aluminum magnetic pinch-weld jack pad with a nylon insert that protects the sill while a jack lifts the car.
Pros
- 4 ton load capacity covers most cars, SUVs and pickups
- Solid aluminum body with a nylon pad insert to protect the pinch weld
- Two magnets in the slot hold it in place while positioning the jack
- Slot measures 0.47 in wide by 0.73 in opening height for common pinch welds
Cons
- It is a pad, not a jack: you still need a floor jack
- Only 1.36 in tall, so it adds almost no lift height
- Universal fit means checking the slot against your weld first
- No stated safety standard
More options to compare
Bonnlo 3 Ton Low Profile Floor JackCheck price on Amazon
Pro-Lift Low Profile Floor Jack Color GreyCheck price on Amazon
BIG RED Hydraulic Trolley Service/Floor Jack with Extra SaddleCheck price on Amazon
ARCAN 3-Ton Aluminum Low Profile Floor JackCheck price on Amazon
Compare the picks
| Model | Capacity | Lift Range | Warranty |
|---|---|---|---|
| ANTPOWER 2 Ton Floor Jack | 2 ton (4,400 lbs) | 5.31″ to 13″ | Limited 1-year warranty |
| Pro-Lift T-9456 Scissor Jack | 3000 lb (1.5 ton) | 3-3/4″ to 15-1/8″ | Ninety (90) day limited warranty |
| LIFSHP Magnetic Jack Pad | 4 ton | Not stated | 1-year warranty |
| VEVOR 5 Ton Electric Car Jack | 5 ton (11023 lbs) | Not stated | Not stated |
| Pro-LifT F-2315PE Trolley Jack | 3000 lbs | 12 Inch | Not stated |
*Specifications are manufacturer rated, as published on each listing and collected 22 October 2026. A figure a listing does not state is marked “Not stated”.
How we scored them
Each jack is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A stated safety standard such as ASME or ANSI/PALD earns safety points, and a stated warranty term earns warranty points; a listing that states neither earns no points in those columns.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ANTPOWER 2 Ton Floor Jack | 9.7 | 29 | 21 | 21 | 8 | 4 |
| Pro-Lift T-9456 Scissor Jack | 9.5 | 26 | 20 | 20 | 7 | 0 |
| LIFSHP Magnetic Jack Pad | 9.3 | 21 | 20 | 19 | 0 | 3 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
We read five floor jack listings. All five stated a capacity, three stated a lift range, three stated a warranty term, and two stated a safety standard. One listing contradicted itself on the warranty term, and two gave almost no specs beyond the title.
The two fully detailed listings, the ANTPOWER floor jack and the Pro-Lift scissor jack, carried the most useful figures: capacities of 2 ton (4,400 lb) and 3000 lb (1.5 ton), lift ranges of 5.31 in to 13 in and 3-3/4 in to 15-1/8 in, and stated standards of ASME and GS on one and ANSI/PALD on the other. The electric VEVOR kit stated the highest capacity at 5 ton (11023 lb) but no warranty term, and the two reused listings gave only title-level specs.
Buying guide: the best floor jack for oil changes
Capacity for your car
A jack only needs to be rated for the end of the car it lifts, not the whole vehicle. The picks here run from 3000 lb (1.5 ton) to 5 ton (11023 lb); match the rating to your heaviest car and leave some margin.
Lift range matters more than you think
The minimum height decides whether the saddle slides under a low front end; the maximum decides whether you can reach the drain plug in comfort. A 5.31 in minimum reaches lowered cars, while a 15-1/8 in maximum leaves room to work underneath.
Low profile for low cars
Sports cars and compact sedans need a saddle that starts low. The low-profile steel pick here starts at 5.31 in (135 mm) and rolls on four casters; a scissor jack folds flatter still for trunk storage.
Steel or electric
A steel hydraulic jack is the garage workhorse: simple, strong, and easy to service. An electric jack like the 5 ton (11023 lb) VEVOR trades pumping for a 12V hookup and adds tools like an impact wrench and inflator pump. Pick steel for the home garage, electric if you want powered lifting and a 12V source is handy.
Jack pads and pinch welds
Many cars lift from the pinch weld, and a bare saddle can fold that seam. A magnetic pad like the 4 ton LIFSHP spreads the load across the weld; its 0.47 in by 0.73 in slot fits common welds, and two magnets keep it in place while you position the jack. It is a cheap add-on that protects the sill on every oil change.
Safety standards and stands
Look for a stated standard such as ASME or ANSI/PALD before you buy. And never get under a vehicle on a jack alone: lower it onto rated jack stands on solid, level ground, and use the lift points in your owner’s manual.
Warranty terms
Stated terms here run to a 1-year term. One listing phrases its coverage as a Ninety (90) Day Limited Warranty, which does not count as a stated term. Short terms are common at this end of the market; a longer stated term earns warranty points in our scoring.
After the oil change, a cordless ratchet for oil change speeds up the drain plug and filter.
A jack is for lifting, not holding. Never work under a vehicle supported only by a jack: set it on rated jack stands, on solid, level ground, at the manufacturer's lift points, chock the wheels, and give the car a firm shake before you go under. Read our Safety Disclaimer.
Garage Fit Check
- Space: the scissor jack measures 17.72 x 4.13 x 5.31 inches, and the floor jack’s two-piece handle folds for storage.
- Weight: the steel floor jack weighs 43.2 lb (19.6 kg), so decide where it will live in the garage.
- Power: the electric pick runs on 12V, so keep a 12V source within reach.
- Fit: check the 5.31 in minimum saddle height against your front clearance, and the 0.47 in pad slot against your pinch weld.
- Stands: pair any jack here with rated jack stands on solid, level ground.
Saddle size and pinch welds
The saddle is where the jack meets the car: too small and it dents the pinch weld, too wide and it will not sit in the jack point. Check the listing for the saddle diameter and whether a rubber pad is included; a rubber saddle pad protects the pinch weld on unibody cars. None of the listings here state a saddle pad included, so plan to add one. For oil changes on a unibody sedan, the jack point is usually the reinforced pinch weld behind the front wheel: consult the owner’s manual, not the jack listing, for the exact point.
Lift range and lowered cars
Stated lift ranges vary across the picks: check the minimum saddle height against your car’s ground clearance. A jack that does not fit under the car is useless no matter its capacity. For lowered cars, a low-profile jack is not optional. The listings state their minimum and maximum heights: compare the minimum to the clearance under your car’s jack point before buying.
Frequently Asked Questions
What size floor jack do I need for oil changes?
Match the rated capacity to the end of the car you lift, and check the minimum saddle height against your front clearance. The picks here range from 3000 lb (1.5 ton) to 5 ton (11023 lb), with minimum heights from 3-3/4 in to 5.31 in. When in doubt, size up: a 2 ton (4,400 lb) jack covers most sedans and crossovers.
Can I get under the car on just a floor jack?
No. Never get under a vehicle supported only by a jack. Lower the car onto rated jack stands on solid, level ground before you reach for the drain plug, and use the lift points in your owner’s manual.
Is a scissor jack enough for oil changes?
It can work: the scissor pick here is rated at 3000 lb (1.5 ton) with a 3-3/4 in to 15-1/8 in range. A hydraulic floor jack lifts faster and rolls into place, so it suits regular oil changes better. The scissor jack weighs 3.98 kg and measures 17.72 x 4.13 x 5.31 inches, so it tucks behind the spare tire.
What is a jack pad for?
A jack pad sits between the saddle and the car’s pinch weld so the lift does not damage the seam. The pad here is rated at 4 ton, with a 0.47 in by 0.73 in slot and two magnets that hold it in place.
Do I need a low-profile jack?
Only if your car sits low. A 5.31 in minimum saddle height slides under sports cars and compact sedans; a taller jack is fine for trucks and SUVs with more clearance.
Also see our air jack vs floor jack. Also see our rubber vs aluminum jack pads. Also see our best jack stands for low cars. Also see our floor jack vs car lift. Also see our heavy duty vs standard floor jack. Also see our best oil change kit for beginners. Also see our electric vs hydraulic car jack.
