Best Mini Bench Vise: 4 Small Vises for the Workbench
Four mini bench vises for small garage and workbench jobs, compared by jaw opening, clamp capacity, material and weight.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Top PickMYTEC Clamp-On Vise9.6/10View on Amazon - 2
Best RotatingARTYMASTER WT104C9.6/10View on Amazon - 3
Best KitBUYSK Mini Clamp9.5/10View on Amazon - 4
Best CompactSourcemall Mini Vise9.4/10View on Amazon - 5
TGDGAMER Mini Tabletop ViseView on Amazon - 6
MYTEC 2-In-1 Work Bench ViseView on Amazon - 7
MYTEC Bench Vise or Table ViseView on Amazon - 8
MYTEC 2-In-1 Bench Vise Heavy Duty for WorkbenchView on Amazon - 9
Fasmov Swivel 3" Universal Table Vise Tilts Rotate 360°View on Amazon - 10
Forward DT08125A 5 Inch Heavy Duty Bench Vise with 360°SwivelView on Amazon
A small part that needs filing, drilling or gluing while both hands stay free is the classic workbench problem: holding it steady without marring it, and the best mini bench vise for that job clamps to the bench edge in moments. This guide compares four mini vises by jaw opening, clamp capacity, material, weight and what comes in the box.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Top Pick MYTEC Clamp-On Vise: 2.5 inch jaw opening with a 360-Degree swivel base and a cast iron body. Check price on Amazon
- Best Rotating ARTYMASTER WT104C: 360-degree ball head with a ratchet wrench and a 0-2.48 inch clamping range. Check price on Amazon
- Best Kit BUYSK Mini Clamp: Clamp plus 4 support columns, 2 clamping blocks and 4 fixed screws in one box. Check price on Amazon
- Best Compact Sourcemall Mini Vise: Simple 393 g aluminum vise with a 0-2 inch clamping range. Check price on Amazon
Picks for the garage
MYTEC Home Vise Clamp-On Vise，2.5"
A clamp-on home vise with a 2.5 inch jaw opening, a 2.0 inch jaw width, a 360-Degree swivel base and a cast iron body, weighing 3.31 lbs.
Pros
- 2.5 inch jaw opening, the widest here
- 360-Degree swivel base for left-handed and right-handed use
- Clamps tables up to 2.4 inches thick with no punching
- 2 rubber washers and 2 jaw washers protect the table and parts
Cons
- No warranty term stated
- No safety listing stated
- Cast iron body at 3.31 lbs, the heaviest here
- Single vise only, no extra clamping blocks listed
360° Rotating Mini Bench Vise with Quick-Release
A 360-degree rotating mini bench vise with a ratchet wrench, a 0-2.48 inch clamping range, dual V-shaped grooves and a C-clamp for desktops up to 2.8 inches thick.
Pros
- 360-degree ball head with ratchet wrench for multi-angle adjustment
- 0-2.48 inch clamping range with dual V-shaped grooves
- C-clamp supports desktops up to 2.8 inches thick
- Rubber soft jaws and POM fixed columns protect parts and prevent slipping
Cons
- No warranty term stated
- No weight stated
- No jaw width stated
- No safety listing stated
Mini Bench Vice Clamp Mini Flat Clamp Opening
A mini bench clamp in aluminum alloy with a 0-2.1 inch opening range, a handheld design and a kit of support columns, clamping blocks and fixed screws.
Pros
- Kit includes 4 support columns, 2 clamping blocks and 4 fixed screws
- 0-2.1 inch opening range for round, square and irregular objects
- Compact 4.1 x 2.3 x 1.3 inch size for small benches
- Aluminum alloy body, light-weight and portable
Cons
- No warranty term stated
- No safety listing stated
- Handheld design, not a fixed bench mount
- Opening range below the 2.5 inch and 2.48 inch picks
Mini Bench Vise Small Table Clamp Hobby Craft
A mini bench vise in aluminum with a 0-2 inch clamping range, a simple top-bar design and a 393 g body for small parts.
Pros
- Simple top-bar design, easy to open and close
- Light 393 g aluminum body, very portable
- Clamps onto surfaces up to 30mm thick
- Holds small parts for hobby, model making and electronics work
Cons
- No warranty term stated
- No safety listing stated
- 0-2 inch range, the narrowest here
- No included accessories listed beyond the vise
Other tools worth a look
TGDGAMER Mini Tabletop ViseCheck price on Amazon
MYTEC 2-In-1 Work Bench ViseCheck price on Amazon
MYTEC Bench Vise or Table ViseCheck price on Amazon
MYTEC 2-In-1 Bench Vise Heavy Duty for WorkbenchCheck price on Amazon
Fasmov Swivel 3" Universal Table Vise Tilts Rotate 360°Check price on Amazon
Forward DT08125A 5 Inch Heavy Duty Bench Vise with 360°SwivelCheck price on Amazon
Compared on paper
| Model | Shop Score | Jaw opening | Jaw width | Clamp capacity | Material | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| MYTEC Clamp-On Vise | 9.6/10 | 2.5 inch | 2.0 inch | Tables up to 2.4 inches thick | Cast iron | 3.31 lbs | Not stated |
| ARTYMASTER WT104C | 9.6/10 | 0-2.48 inches | Not stated | Desktops up to 2.8 inches thick | Aluminum alloy | Not stated | Not stated |
| BUYSK Mini Clamp | 9.5/10 | 0-2.1 inch | Not stated | Not stated | Aluminum alloy | 0.29 kg | Not stated |
| Sourcemall Mini Vise | 9.4/10 | 0-2 inch | Not stated | Surfaces up to 30mm thick | Aluminum | 393 g | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 25 October 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each vise is scored on performance, build, value, safety and warranty, with the weights published on the site’s How We Pick page. None states a warranty term or a safety listing, so safety and warranty scores stay at zero across all four.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MYTEC Clamp-On Vise | 9.6 | 30 | 22 | 19 | n/a | 0 |
| ARTYMASTER WT104C | 9.6 | 29 | 21 | 20 | n/a | 0 |
| BUYSK Mini Clamp | 9.5 | 27 | 19 | 20 | n/a | 0 |
| Sourcemall Mini Vise | 9.4 | 26 | 18 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
This guide covers 4 mini bench vise listings. Jaw openings run from 0-2 inch to 2.5 inch, and 2 offer 360-degree rotation. None states a warranty term or a safety listing. Pack contents run from a bare vise to a kit with support columns, clamping blocks and fixed screws.
How to pick the best mini bench vise
Jaw opening
Jaw openings here run from 0-2 inch to 2.5 inch. Match the opening to the parts you hold most: small fittings suit a narrow opening, while a 2.5 inch opening holds larger brackets and blocks.
Clamp capacity
Clamp capacity states how thick a table the vise grips: 2.4 inches on one pick, 2.8 inches on another, and 30mm on a third. Measure the bench edge before ordering.
Material
Cast iron suits heavy filing, while aluminum alloy keeps the vise light and portable for moving between benches. One pick here is cast iron, and the rest are aluminum or aluminum alloy.
Mounting
Two picks swivel: one on a 360-Degree base and one on a 360-degree ball head. A swivel base lets left-handed and right-handed users turn the vise to the working position.
Included accessories
One pick ships as a kit with 4 support columns, 2 clamping blocks and 4 fixed screws. The rest ship as a bare vise with jaws and washers, so check what is in the box before ordering.
Garage Fit Check
- Check the bench edge first: clamp capacities here run from 30mm to 2.8 inches thick.
- Match the jaw opening to the parts: openings run from 0-2 inch to 2.5 inch.
- Plan for the footprint: one vise measures 7.4 x 6.34 x 3.15 inches, while another measures 4.1 x 2.3 x 1.3 inches.
- Several picks include rubber washers, soft jaws or clamping blocks to guard parts.
- Store small vises where they are easy to reach: one pick weighs only 393 g.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
FAQ: garage tools
What is a mini bench vise used for?
A mini bench vise holds small parts steady for filing, drilling, grinding, sanding, carving, assembly and detail work. The picks here suit garage and workbench jobs where a full-size vise would be too large for the part.
How do you mount a clamp-on bench vise?
Clamp it to the edge of a desktop or bench: adjust the fixing jaw to a larger opening first, then tighten the clamp, with rubber washers guarding the table surface. No punching on the table is needed for the clamp-on picks here.
What jaw opening do I need for small garage jobs?
Openings here run from 0-2 inch to 2.5 inch. Small fittings and fasteners suit a narrow opening, while brackets and blocks need the wider end of the range.
Can a mini bench vise hold metal parts?
Yes. One pick is cast iron for heavier work, and another lists metalworking among its uses, with dual V-shaped grooves for cylindrical and irregular metal workpieces. Check the material list and jaw opening before clamping a metal part.
What is the difference between a clamp-on vise and a drill press vise?
A clamp-on vise grips the bench edge with a clamp, while a drill press vise mounts on a drill press table. Two picks here do both: they clamp to a desktop edge and carry a slot compatible with many mini drill presses.
Related: our engine and shop equipment hub, the best bench vise for garage, the best bench vise for home mechanics and bench vise types.
