Best 6 Inch Heavy Duty Bench Vise (2026): 5 Picks Compared
Five 6-inch bench vises for heavy garage work, compared by clamping force, jaw width, throat depth, swivel base, weight and warranty.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWilton 676U9.7/10View on Amazon - 2
Highest Clamping ForcePONY 291609.6/10View on Amazon - 3
Best Value Heavy DutyForward 306069.7/10View on Amazon - 4
Best Clamp-OnZHRMJZG Bench Vise9.4/10View on Amazon - 5
Best LightweightNakkaa 6 In Vise9.3/10View on Amazon
A bolt that will not budge, a pipe that needs a square cut, a bracket that has to stay put while you drill: each of those jobs starts with holding the work steady. This best 6 inch heavy duty bench vise roundup compares the vises by clamping force, jaw width, throat depth, swivel base, weight and warranty, using only what each listing states.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Wilton 676U: 6-1/2 in jaws, 4 in throat, lifetime warranty, 39.7 lb. Check price on Amazon
- Highest Clamping Force PONY 29160: 8,800 lb clamping force, 360-degree swivel base and built-in anvil. Check price on Amazon
- Best Value Heavy Duty Forward 30606: 6,600 lb clamping force, 60,000 PSI ductile iron, dual jaw sets. Check price on Amazon
- Best Clamp-On ZHRMJZG Bench Vise: 2-in-1 bolt-on or clamp-on fit for tables up to 2.3 in thick, 3-year replacement. Check price on Amazon
- Best Lightweight Nakkaa 6 In Vise: 13.78 lb with a 360-degree swivel base and anvil for light home work. Check price on Amazon
Picks for the garage
Wilton Utility 6-1/2" Bench & Pipe Vise
A 6-1/2 in utility bench and pipe vise with a 4 in throat, built-in pipe jaws, a 360-degree swivel base with dual lockdowns and a Lifetime Warranty.
Pros
- 6-1/2 in jaws with a 6 in maximum opening and 4 in throat depth
- Pipe jaws hold pipe from 1/4 in to 2 in in diameter
- 60,000 PSI ductile iron base with a 30,000 PSI gray cast iron body
- Lifetime Warranty against manufacturer defects with replacement parts listed
Cons
- No clamping force stated in the listing
- Listing says it is sized for everyday holding jobs, not as a press
- Heaviest here at 39.7 lb
- Mounting needs four holes with 7/16-inch bolts on a 7-1/2-inch bolt circle
Forward 30606 6 Inch Bench Vise Heavy Duty
A 6 in heavy duty bench vise with 6,600 lb clamping force, 60,000 PSI ductile iron, flat and pipe jaws, a 3.4 x 2.8 in anvil and a 360-degree swivel base.
Pros
- 6,600 lb clamping force, the second highest stated here
- 60,000 PSI ductile iron with a steel U-channel slide bar
- Two jaw sets: replaceable flat jaws and built-in pipe jaws for 3/4 in to 2 1/2 in pipe
- 3.4 x 2.8 in anvil with a 360-degree swivel base and dual locking nuts
Cons
- No warranty term is stated in the listing
- No replacement parts listed
- Throat depth of 3 3/8 in is shallower than the Wilton at 4 in
- 33.9 lb with no handle or carry feature stated
PONY 6 Inch Heavy Duty Bench Vise
A 6 in heavy duty bench vise with 8,800 lb clamping force, a 360-degree swivel base, built-in anvil and replaceable pipe jaws.
Pros
- 8,800 lb clamping force, the highest stated here
- 360-degree swivel base with a built-in anvil and replaceable pipe jaws
- Fully enclosed rear keeps dust and debris out of the vise body
- Mounting screws and nuts included for quick installation
Cons
- Ductile iron tensile strength is listed at 6,000 PSI, far below the 60,000 PSI listed for the Forward and Wilton
- No weight stated in the listing
- No throat depth stated in the listing
- No warranty term is stated in the listing
Bench Vise, 6" Table Vise For Workbench,2-in-1
A 6 in bench vise with a 2-in-1 bolt-on or clamp-on fit, 270-degree swivel base, forged steel build and soft jaws.
Pros
- 2-in-1 fit: bolts to the bench or clamps to tables up to 2.3 in thick with no drilling
- Forged steel build with a rust-resistant surface coating
- 270-degree swivel base for repositioning the work
- Unconditional replacement within 3 years if the product malfunctions during normal use
Cons
- Maximum jaw opening of 3.6 in is the smallest here
- No clamping force stated in the listing
- No throat depth stated in the listing
- No anvil stated in the listing
Nakkaa 6 Inch Lightweight Bench Vise 360° Swivel
A lightweight 6 in bench vise with a 360-degree swivel base, built-in anvil and replaceable clamp design for home workshop work.
Pros
- Lowest weight here at 13.78 lb, easy to move around the bench
- 360-degree swivel base with a built-in anvil
- Ductile iron build with a replaceable clamp design
- 6-inch size balances clamping and portability for home work
Cons
- No clamping force stated in the listing
- No jaw opening or throat depth stated in the listing
- Spec table lists the size as 10 Inch Bench Vise while the title and bullets say 6 inch
- No warranty term is stated in the listing
Compared on paper
| Model | Clamping force | Jaw width | Max opening | Throat depth | Swivel base | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| Wilton 676U | Not stated in the listing | 6-1/2 in | 6 in | 4 in | 360°, dual lockdowns | 39.7 lb | Lifetime |
| Forward 30606 | 6,600 lb | 6 in | 6 in | 3 3/8 in | 360°, dual locking nuts | 33.9 lb | Not stated in the listing |
| PONY 29160 | 8,800 lb | 6 in | 6 in | Not stated in the listing | 360° | Not stated in the listing | Not stated in the listing |
| ZHRMJZG Bench Vise | Not stated in the listing | 6 in | 3.6 in | Not stated in the listing | 270° | 17.4 lb | 3-year replacement |
| Nakkaa 6 In Vise | Not stated in the listing | 6 in | Not stated in the listing | Not stated in the listing | 360° | 13.78 lb | Not stated in the listing |
Specifications are manufacturer rated, as published on each listing and collected 6 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each vise is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None of the five listings states a safety certification, so all score zero on safety. The Wilton carries a Lifetime Warranty and the ZHRMJZG promises replacement within 3 years, while the other three listings state no warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Wilton 676U | 9.7 | 28 | 22 | 20 | n/a | 4 |
| Forward 30606 | 9.7 | 32 | 22 | 21 | n/a | 0 |
| PONY 29160 | 9.6 | 33 | 19 | 20 | n/a | 0 |
| ZHRMJZG Bench Vise | 9.4 | 23 | 18 | 19 | n/a | 3 |
| Nakkaa 6 In Vise | 9.3 | 21 | 18 | 18 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
This roundup covers 5 bench vise listings. All 5 list a 6-inch jaw width except the Wilton, which lists 6-1/2-inch jaws, and all 5 have a swivel base. Only 2 state a clamping force: 8,800 lb for the PONY and 6,600 lb for the Forward. Only 2 state a throat depth: 4 inches for the Wilton and 3 3/8 inches for the Forward. Only 2 state a warranty term, and 1 listing contradicts itself on size: the Nakkaa spec table says 10 Inch Bench Vise while its title and bullets say 6 inch.
Buying guide: best 6 inch heavy duty bench vise
Clamping force
Two listings state a clamping force: 8,800 lb for the PONY and 6,600 lb for the Forward. The Wilton, ZHRMJZG and Nakkaa state no clamping force, so judge those three on jaw width, throat depth, weight and warranty instead.
Jaw width, opening and throat depth
All five list a 6-inch jaw width except the Wilton, which lists 6-1/2-inch jaws. The PONY, Wilton and Forward list a 6-inch maximum opening, the ZHRMJZG lists a 3.6-inch maximum opening, and the Nakkaa lists no opening. Throat depth is stated only for the Wilton at 4 inches and the Forward at 3 3/8 inches.
Swivel base and mounting
Every vise here swivels: 360 degrees except the ZHRMJZG at 270 degrees. The Wilton locks with two hand-tightened lockdowns and mounts through four holes with 7/16-inch bolts on a 7-1/2-inch bolt circle, the Forward uses dual locking nuts, and the ZHRMJZG bolts on or clamps to tables up to 2.3 inches thick with no drilling.
Weight and build
Weights run from 13.78 lb for the Nakkaa to 39.7 lb for the Wilton, with the Forward at 33.9 lb and the ZHRMJZG at 17.4 lb; the PONY lists no weight. The Forward lists 60,000 PSI ductile iron throughout and the Wilton lists a 60,000 PSI ductile iron base with a 30,000 PSI gray cast iron body, while the PONY lists 6,000 PSI tensile strength for its ductile iron.
Warranty and replacement parts
The Wilton carries a Lifetime Warranty against manufacturer defects, and the ZHRMJZG promises unconditional replacement within 3 years if the product malfunctions during normal use. The PONY, Forward and Nakkaa listings state no warranty term. Wilton lists replacement parts for the spindle and handle, jaw inserts, base plate and lockdown assemblies.
Garage Fit Check
- Measure the bench first: the Wilton mounts through four holes with 7/16-inch bolts on a 7-1/2-inch bolt circle, while the ZHRMJZG clamps to tables up to 2.3 inches thick with no drilling.
- Plan for the weight: the Wilton is 39.7 lb at 18.1 x 9.4 x 10.2 inches and the Forward is 33.9 lb at 16.2 x 6.9 x 7.4 inches.
- Check the opening against your stock: the PONY, Wilton and Forward open to 6 inches, while the ZHRMJZG opens to 3.6 inches.
- Match the jaws to the work: the Forward ships flat jaws and pipe jaws for 3/4-inch to 2 1/2-inch pipe, the Wilton pipe jaws hold 1/4-inch to 2-inch pipe, and the PONY has replaceable pipe jaws.
- Leave room to swivel: all five turn on their bases, 360 degrees except the ZHRMJZG at 270 degrees, and the PONY adds a built-in anvil for hammering and shaping.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
FAQ: garage tools
What clamping force should a 6-inch bench vise have?
Only 2 of these listings state one: 8,800 lb for the PONY and 6,600 lb for the Forward. The other three state no clamping force, so compare them on jaw width, throat depth and weight.
What is the throat depth on a 6-inch bench vise?
The Wilton lists 4 inches and the Forward lists 3 3/8 inches. The PONY, ZHRMJZG and Nakkaa listings state no throat depth.
Can a bench vise hold pipe?
Three of these can: the PONY has replaceable pipe jaws, the Wilton pipe jaws hold pipe from 1/4 inch to 2 inches, and the Forward pipe jaws hold 3/4 inch to 2 1/2 inch pipe. The ZHRMJZG and Nakkaa listings state no pipe jaws.
Do these bench vises swivel?
Yes, all five swivel on their bases: 360 degrees for the PONY, Wilton, Nakkaa and Forward, and 270 degrees for the ZHRMJZG.
Which bench vise has a lifetime warranty?
The Wilton, with a Lifetime Warranty against manufacturer defects. The ZHRMJZG promises unconditional replacement within 3 years, and the other three listings state no warranty term.
Related: the best bench vise, the heavy duty vs standard bench vise, the best swivel bench vise and the cast iron vs steel bench vise.
