Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Air Compressor Oil 30 Weight: Choosing the Right Grade

A compressor manual that calls for non-detergent SAE 30 wants a straight grade oil, and the bottle has to match the manual.

Air Compressor Oil 30 Weight: Choosing the Right Grade
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Valvoline Daily Protection Non-Detergent SAE 30Valvoline Daily Protection Non-Detergent SAE 309.5/10View on Amazon
  2. 2TRIAX Kompressor ISO 68, Full SyntheticTRIAX Kompressor ISO 68, Full Synthetic9.4/10View on Amazon

Your air compressor is due for an oil change, and the manual calls for a straight grade oil. That is the job air compressor oil 30 weight covers when the manual calls for non-detergent SAE 30: a straight grade oil for compressor pumps. Check the grade your manual calls for before you buy, because the pump maker, not the shelf, decides which oil goes in.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: what 30 weight means for a compressor, why the manual calls for non-detergent oil, and the two oils below for the job.

Valvoline Daily Protection Non-Detergent SAE 30

Valvoline Daily Protection Non-Detergent SAE 30

Valvoline9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A non-detergent SAE 30 conventional oil in a case of six 1-quart bottles, listed by the maker for air compressors, hydraulic systems and engines requiring API SB.

Pros

  • SAE 30 non-detergent oil the maker lists for air compressors
  • Stated to meet air compressor, hydraulic and API SB requirements
  • Case of six 1-quart bottles
  • Enhanced oxidation control to resist oil thickening

Cons

  • Conventional oil, not a full synthetic
  • No warranty term is stated
  • Sold only as a case of six 1-quart bottles
  • Non-detergent formula is only for equipment that specifies it
TRIAX Kompressor ISO 68, Full Synthetic

TRIAX Kompressor ISO 68, Full Synthetic

Triax9.4/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A full synthetic ISO 68 multi-vis air compressor oil in a 1-gallon jug, listed by the maker for rotary, vane, screw and reciprocating compressors.

Pros

  • Full synthetic multi-vis oil for rotary, vane, screw and reciprocating compressors
  • Maker states over 20,000 hours of service life
  • All-season range from -49°F to 140°F and up, per the maker
  • Maker lists compatibility with Ingersoll Rand, Atlas Copco, Quincy, Dewalt and Sullair

Cons

  • ISO 68 multi-vis, not an SAE 30 oil
  • No warranty term is stated
  • Not for use in oxygen air or LNG compressors
  • Only size stated is 1 gallon

Air compressor oil 30 weight: what the grade means

SAE 30 is a single grade oil, which means it carries one grade designation rather than a multi-vis range. A compressor pump runs hot, so the maker picks a grade that keeps a film between the moving parts at that heat. The Valvoline oil below is an SAE 30 non-detergent oil the maker lists for air compressors, while the TRIAX oil below is an ISO 68 multi-vis oil for compressors whose manual allows a multi-vis grade.

Weight and grade are the same idea in different words: the number on the bottle tells you how thick the oil is within one grading scale. Within one scale, a higher number means a thicker oil, and the manual’s number is the one to buy. Do not swap grades because the bottle looks the same; the pump was built around the grade the manual names.

Non-detergent vs detergent: why the manual calls for one

A non-detergent oil lets particles settle instead of holding them in suspension. A detergent oil holds dirt in the oil so a filter can catch it, which suits an engine with a filter. That is why the Valvoline oil below is made for equipment that specifies a non-detergent formulation, and why the manual’s word on detergent or non-detergent matters more than the brand on the bottle.

Check the manual before you pour: look for the grade it names and whether it calls for non-detergent oil, and buy the oil that matches the manual. If the manual names a different grade or a detergent oil, buy that one instead; the two oils below cover the non-detergent SAE 30 job and the multi-vis job, not every compressor.

How to check the oil and change it

Check the oil the way the manual says: look at the sight glass or dipstick with the compressor on level ground, and look at the oil level and color. If the manual gives a change interval, follow it, and watch for the signs it lists, such as dark oil or a low level. Drain the old oil, pour in the new oil to the level the manual calls for, and run the compressor briefly to check for leaks.

Keep the oil you buy sealed and upright, and keep it away from dust and damp. Write the grade on the bottle in your notes so the next change uses the same oil, and keep the manual’s page on oil where you can find it.

The oils for this job

Both oils below suit a compressor oil change, but they suit different manuals: the Valvoline is the SAE 30 non-detergent oil for a manual that calls for that grade, and the TRIAX is the multi-vis oil for a manual that allows a multi-vis grade.

Compressor safety

Drain the tank after use so water does not rust it from the inside, never exceed the tool's rated pressure, wear eye protection, and run 240V units on the circuit the manual calls for. Do not run a gas engine compressor in a closed garage. Read our Safety Disclaimer.

FAQ: garage tools

Can I use SAE 30 motor oil in my air compressor?

Only if the manual calls for it. The Valvoline oil below is an SAE 30 non-detergent oil the maker lists for air compressors, so it suits a manual that calls for non-detergent SAE 30. A car motor oil with detergents does not suit a compressor that specifies non-detergent oil.

What does ISO 68 mean next to SAE 30?

ISO 68 is a different grading scale for industrial oils, and the TRIAX oil below is an ISO 68 multi-vis oil. It is not an SAE 30 oil, so use it only when your compressor manual allows a multi-vis grade. Follow the manual’s grade, not the number on a different scale.

How much oil does my compressor take?

It depends on the compressor, so check the manual or the sight glass for the fill level. The Valvoline oil comes as a case of six 1-quart bottles, and the TRIAX oil comes as a 1-gallon jug, so buy the size that covers your change with the manual’s level as the guide.

Can I mix the two oils below?

Do not mix them. The Valvoline is a conventional non-detergent SAE 30 oil, and the TRIAX is a full synthetic multi-vis ISO 68 oil. Drain the old oil and fill with the one oil your manual calls for.

How do I know the oil needs changing?

Follow the manual’s change interval and the signs it lists, such as dark oil or a low level on the sight glass. If the oil looks dark or the level has dropped, change it and check for leaks around the pump.

Does the TRIAX oil work in any compressor?

No. The maker lists it for rotary, vane, screw and reciprocating compressors, and states it is not for use in oxygen air or LNG compressors. Check your compressor type against the maker’s list before you buy.

Related: air compressors, air compressor filter assembly, air compressor pump parts and high capacity air compressor.

More buying guides