Air Compressor Regulator Parts: Identify and Replace
Air compressor regulator parts explained by thread, pressure and flow: regulator bodies, gauges, filter bowls, drains, brackets and fittings for garage lines.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
3/8" NPT Air Filter Regulator Lubricator Combo9.6/10View on Amazon - 2
1/4" NPT Air Compressor Filter & Pressure9.6/10View on Amazon - 3
SNS AR4000-N04 Female Thread 1/2 NPT Air Pressure9.5/10View on Amazon - 4
Hromee 1/2 Inch Compressed Filter Regulator Combo9.5/10View on Amazon
An air tool that surges, stalls or sprays water usually points back to the regulator station, and air compressor regulator parts are the pieces you check and replace there: the regulator body with its adjusting knob, the pressure gauge, the filter bowl and element where fitted, the drain, and the bracket and fittings that mount the assembly to the line. Match thread size, pressure range and flow to your line before you order a replacement.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: how to identify each part, how to choose a replacement by thread, pressure and flow, and the regulator gear that handles each step.

3/8" NPT Air Filter Regulator Lubricator Combo
A 3/8 inch NPT filter regulator lubricator with a 5-micron brass element, 0-150 psi gauge, semi-auto drain and a guarded polycarbonate bowl.
Pros
- Filter, regulator and lubricator in one compact unit
- Bracket, coupler and plug kit, fittings and thread seal tape in the box
- Metal guard on the polycarbonate bowl
- 5-micron brass element, cleanable and reusable per the maker
Cons
- Pressure range stated three different ways on the listing
- No warranty term is stated
- No safety listing is stated

1/4" NPT Air Compressor Filter & Pressure
A 1/4 inch NPT filter and regulator combo with a 5-micron brass element, semi-auto drain, 0-150 psi gauge and 20 SCFM at 90 psi, sized for airbrush and small air tools.
Pros
- 5-micron brass element filters moisture, oil and dust
- 20 SCFM (550 L/min) at 90 psi for small tools
- 0-150 psi gauge with a pull-to-lock adjustment knob
- Bracket, coupler and plug kit, fittings and thread seal tape included
Cons
- No warranty term is stated
- No safety listing is stated
- Limited to small air tools and airbrush work
- No lubricator function for oiled tools

SNS AR4000-N04 Female Thread 1/2 NPT Air Pressure
A 1/2 NPT air pressure regulator rated 0-150 PSI with bracket and gauge for pressure control on a compressor line.
Pros
- Rated flow of 211.9 SCFM (6000 L/min) stated
- 0-150 PSI range with bracket and gauge included
- Temperature range of 41-140 degrees F stated
- Aluminum alloy body with rotary adjusting knob
Cons
- Regulator only, with no filter bowl included
- 1/2 NPT thread must match your line size
- No warranty term is stated
- Gauge and bracket add bulk at the station

Hromee 1/2 Inch Compressed Filter Regulator Combo
A 1/2 inch filter regulator combo with gauge, semi-auto drain and bracket for filtering and pressure control together.
Pros
- 5 micron brass filter element for moisture and particles
- Semi-auto drain for accumulated liquids in the bowl
- Gauge dial in psi and bar to 150 PSI max
- Bracket and adapter fittings included in the set
Cons
- Weighs 2.98 pounds at the mounting point
- Long 12.7 inch body needs clear mounting space
- No warranty term is stated
- Threaded joints need tape for a tight connect
Air compressor regulator parts: what each part does
The regulator body controls outlet pressure. The SNS maker lists a rotary knob that pulls up and rotates clockwise to increase pressure and anticlockwise to decrease pressure, with a range of 0-150 PSI. The Hromee combo uses a pull-up knob to set pressure and is described as maintaining stable outlet pressure. A gauge shows the set pressure.
Filter parts sit ahead of the regulator on combo units. The Hromee maker lists a 5 micron brass filter element, a semi-auto drain for accumulated liquids, and a metal cover that keeps the bowl visible from the side. The NANPU combos name a 5-micron brass filter, poly bowl and semi-auto drain. A plain regulator such as the SNS unit controls pressure without a filter bowl.
How to choose a replacement by thread, pressure and flow
Start with thread size, because a regulator that does not match the line will not fit. Stated threads here are 1/2 NPT on the SNS and Hromee units, 3/8 NPT on the larger NANPU combo, and 1/4 NPT on the smaller NANPU combo. The Hromee set also includes 2 by 1/4 inch double male fittings to transfer female fittings to male fittings, with a maker note to use teflon tape to ensure a tight connect before using. Check whether your line needs female or male threads at each end.
Next compare pressure range and flow together. Every pick here states a top figure of 150 PSI, as a 0-150 PSI range on the SNS and NANPU units and as max pressure 150 PSI on the Hromee combo. Flow separates them more: the SNS maker lists rated flow of 211.9 SCFM (6000 L/min), the larger NANPU title lists 60 SCFM, and the smaller NANPU title lists 20 SCFM. The Hromee flow figure is Not stated. The SNS temperature range is stated as 5 to 60 degrees C (41-140 degrees F). For line sizing background, see CFM vs PSI for air compressors and our air compressors hub.
Drain the tank after use so water does not rust it from the inside, never exceed the tool's rated pressure, wear eye protection, and run 240V units on the circuit the manual calls for. Do not run a gas engine compressor in a closed garage. Read our Safety Disclaimer.
Regulator gear for each replacement step
Use the picks below by step: a plain regulator for pressure control alone, or a filter regulator combo when the same station must also trap water and particles before the tool.
FAQ: garage tools
What parts make up an air compressor regulator station?
The station centers on the regulator body and adjusting knob, plus a pressure gauge to read outlet pressure. Combo units add a filter bowl and element and a drain for accumulated liquids. The Hromee combo also includes a bracket with fittings to mount the assembly. Plain regulators handle pressure control only.
How do I know which thread size to order?
Read the thread stated for your line and match it exactly. Picks here state 1/2 NPT, 3/8 NPT and 1/4 NPT options, and the Hromee set includes adapter fittings for female to male connections. Seal threaded joints as the maker directs for your fitting type.
What pressure range do these regulators cover?
Each pick states a top figure of 150 PSI. The SNS and NANPU units state 0-150 PSI ranges, and the Hromee combo states max pressure of 150 PSI with a gauge dial in psi and bar. Set outlet pressure with the knob and confirm it on the gauge.
Do I need a filter with my regulator?
Choose a filter regulator combo when moisture and particles reach your tools. The Hromee and NANPU combos name brass filter elements, bowls and semi-auto drains for that step. A plain regulator such as the SNS unit controls pressure only, so filtration must sit elsewhere.
Which flow figure should I compare for my tools?
Compare rated flow in SCFM where stated. The SNS maker lists 211.9 SCFM (6000 L/min), the larger NANPU title lists 60 SCFM, and the smaller NANPU title lists 20 SCFM. The Hromee flow figure is Not stated, so compare its thread and filter parts instead.
Related: 1/2 inch air compressor filter regulators, air compressor filter assembly, water separators with filter and regulator and air compressors for air tools.




