Best 2 Post Car Lift Pinch Weld Pads (2026): 5 Pads Compared
Five rubber pinch weld pads for 2-post lifts and jack stands, compared by capacity, size, groove design, anti-slip surface and warranty.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallIisleAyre 4Pads9.5/10View on Amazon - 2
Best V GrooveSEVEN SPARTA SZ101099.5/10View on Amazon - 3
Best 8-PackTINSKY TM01559.4/10View on Amazon
The arms swing under the car, the pads meet the pinch welds, and the lift starts to rise. A bare metal arm on a folded seam can bend the weld or scrape the coating, and the damage only shows after the car is back on the ground. That gap is where the best 2 post car lift pinch weld pads in this guide earn their place.
This guide compares five rubber pinch weld pads by capacity, size, groove design, anti-slip surface, pack count and warranty terms. Four come as 4-piece sets and one as an 8-piece set in 2 types, and all five state a rubber build, with four stating a groove or slot for the pinch weld.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall IisleAyre 4Pads: 3000 lbs capacity per pad, solid natural rubber, diamond anti-slip surface, and a stated fit for 2-post lifts. Check price on Amazon
- Best V Groove SEVEN SPARTA SZ10109: 3 Ton suggested capacity, V groove design, anti-slip surface, and a stated fit for Torin Big Red T43002 stands. Check price on Amazon
- Best 8-Pack TINSKY TM0155: 8 pieces in 2 types, round and V groove, for spares and sharing. Check price on Amazon
Picks for the garage
IisleAyre Solid Rubber Auto Lift Pads
A 4-pack of solid natural rubber lift blocks, 6-3/8 by 4-3/4 by 1-1/8 inches, with 3000 lbs capacity per pad, a diamond anti-slip surface and a stated fit for 2-post lifts.
Pros
- 3000 lbs capacity stated per pad
- Solid natural rubber with high elasticity and wear resistance
- Diamond anti-slip surface grips the frame and stops shifting
- Stated fit for 2-post lifts, 4-post lifts, scissor lifts, floor jacks and jack stands
Cons
- Warranty field gives only a single figure with no unit
- Spec table states 6.3 by 4.7 by 1 inch, close to but not the same as the title size
- No groove stated for the pinch weld
- No weight stated
Seven Sparta 4 Pcs Jack Stand Pads Adapter Pinch
A 4-piece set of heavy duty rubber jack stand pads with a V groove, anti-slip surface and a suggested 3 Ton load capacity, sized 5.12 by 4.13 by 1.97 inches.
Pros
- Suggested load capacity of 3 Ton
- V groove shields pinch welds and frame rails from bending and scratching
- Anti-slip surface
- Stated fit for Torin Big Red T43002 stands
Cons
- Stated for jack stands, not for 2-post lift arms
- Not compatible with Torin T42002
- 30 day warranty
- Cube shape only, no round pad in the set
8 Pcs 2 Types Jack Stand Pads Adapter Universal
An 8-piece set in 2 types, 4 round pads and 4 V groove pads, in quality rubber with a slotted design for pinch welds and frame rails.
Pros
- 8 pieces in 2 types, 4 round and 4 V groove
- Round pads about 2.95 inches across and 1.38 inches high
- V groove pads about 2.48 by 1.97 by 1.73 inches
- Slotted design adds grip and reduces skidding
Cons
- No warranty stated
- No load capacity stated
- No weight stated
- No named lift or stand fit stated
4 PCS Jack Stand Pads, 2-3 Ton Pinch Weld Jack
A 4-piece set of heavy duty rubber jack pads, 2 to 3 Ton capacity, with a groove design and a non-slip diamond pattern for sedans, SUVs, RVs and vans.
Pros
- Capacity of 2 to 3 Ton stated
- Groove design stops frame rails and pinch welds from bending or scratching
- Non-slip diamond-shaped raised pattern on the surface
- Fits sedans, SUVs, RVs and vans
Cons
- Size stated two ways in the listing
- No warranty term stated
- Stated for floor jacks, not for 2-post lift arms
- 2 to 3 Ton range, not a single figure
4 Packs Square Jack Pads
A 4-pack of square black rubber jack pads, 2.95 by 2.95 by 0.98 inches, with a groove design and an anti-slip surface.
Pros
- Rubber guards painted or coated parts from scratches
- Groove design cradles the pinch weld and the body seam
- Anti-slip surface adds grip on the jack
- Square 2.95 by 2.95 by 0.98 inch blocks fit most floor jacks and vehicles
Cons
- No load capacity stated
- Listing offers 2 or 4 packs, so the pack count needs a second look
- Square shape only, no round pad in the set
- No vehicle-specific fit stated beyond most floor jacks and vehicles
Compared on paper
| Model | Shop Score | Pack | Capacity | Size | Material | Groove | Warranty |
|---|---|---|---|---|---|---|---|
| IisleAyre 4Pads | 9.5/10 | 4 pack | 3000 lbs per pad | 6-3/8 by 4-3/4 by 1-1/8 in | Solid natural rubber | Not stated | Not stated |
| SEVEN SPARTA SZ10109 | 9.5/10 | 4 pack | 3 Ton | 5.12 by 4.13 by 1.97 in | Rubber | V groove | 30 days |
| TINSKY TM0155 | 9.4/10 | 8 pack, 2 types | Not stated | Round 2.95 in dia, V groove 2.48 by 1.97 by 1.73 in | Rubber | V groove and round | No warranty |
| FEAOXYO FEJS015A | 9.4/10 | 4 pack | 2 to 3 Ton | 2.5 by 1.97 by 1.73 in (spec table states 2.4 by 1.7 by 1.85 in) | Heavy duty rubber | Groove | Not stated |
| ThsGivingStore Pads | 9.4/10 | 4 pack | Not stated | 2.95 by 2.95 by 0.98 in | Rubber | Groove | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 11 November 2026. Where a listing contradicts itself, both figures are shown.
How the picks were scored
Each pad is scored on performance, build, value, safety and warranty. Safety scores need a stated listing, and warranty scores need a stated term with a concrete length. None states an ALI or ASME listing, so all score zero on safety, and four give no clear warranty.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| IisleAyre 4Pads | 9.5 | 30 | 22 | 21 | 0 | 0 |
| SEVEN SPARTA SZ10109 | 9.5 | 29 | 21 | 20 | 0 | 1 |
| TINSKY TM0155 | 9.4 | 28 | 19 | 22 | 0 | 0 |
| FEAOXYO FEJS015A | 9.4 | 27 | 20 | 20 | 0 | 0 |
| ThsGivingStore Pads | 9.4 | 27 | 19 | 19 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
Five pad listings were compared. Three stated a load capacity, and two stated none. Four stated a 4-piece pack and one stated 8 pieces in 2 types. One stated a clear warranty term, and one listing gave its size two ways. One listing stated a fit for a named jack stand model and one named model it does not fit.
Buying guide: the best 2 post car lift pinch weld pads for your garage
Capacity
Three listings state a load capacity: 3 Ton on one, 2 to 3 Ton on another, and 3000 lbs per pad on a third. Match the pad to the vehicle and the lift: a pad with no stated capacity leaves the margin to guesswork, so check the listing before lifting.
Size and fit
Pads here run from 2.5 by 1.97 by 1.73 inches to 6-3/8 by 4-3/4 by 1-1/8 inches, with one listing also giving a second set of figures in its spec table. Check the pad against the lift arm and the pinch weld: one listing states a fit for Torin Big Red T43002 stands and warns it does not fit Torin T42002.
Groove design
Four listings state a groove or slot that cradles the pinch weld and keeps the frame rail from bending or scratching. One listing offers 2 types, round and V groove, in one 8-piece pack. The fifth listing states a diamond anti-slip surface with no groove, so check the top face before ordering.
Rubber and grip
All five state a rubber build, from solid natural rubber to heavy duty rubber, and four state an anti-slip surface or diamond pattern. Rubber cushions the pinch weld and the painted or coated parts under the car, while the anti-slip surface keeps the pad from shifting on the lift arm.
Warranty
One listing states a clear warranty term: 30 days. One listing states no warranty, one states no warranty term, one gives only a single figure with no unit, and one gives a replacement promise with no clear term. A stated term is worth more than a vague one when the pads see regular use.
Check the lift's rated capacity against your heaviest vehicle, and its ceiling and concrete requirements (thickness and strength) before you buy. Install it exactly as the manufacturer specifies, use the mechanical locks before you go under, and look for ALI certification on the model. See the Automotive Lift Institute (ALI). Read our Safety Disclaimer.
Garage Fit Check
- Never get under a vehicle supported by a jack alone: use rated stands on solid, level ground.
- Check the lift points in the vehicle owner manual, and the lift maker concrete and ceiling requirements, before lifting.
- Check the pad against the lift arm and the pinch weld: one listing states a fit for Torin Big Red T43002 stands and warns it does not fit Torin T42002.
- Set the handbrake and put the vehicle in gear before lifting, as one listing instructs, so the car cannot roll.
- Store the spare pads with the lift: one listing sells 8 pieces in 2 types, so the spares cover the next job.
FAQ: garage tools
Do pinch weld pads fit a 2-post lift?
One listing states its pads work with 2-post lifts, 4-post lifts, scissor lifts, floor jacks and jack stands. The other listings state jack stands or floor jacks, so check the listing for the lift type before ordering.
What size pinch weld pad fits a 2-post lift?
Match the pad to the lift arm and the pinch weld. Pads here run from 2.5 by 1.97 by 1.73 inches to 6-3/8 by 4-3/4 by 1-1/8 inches, and one listing offers a round pad about 2.95 inches across and a V groove pad about 2.48 by 1.97 by 1.73 inches.
How much weight can a pinch weld pad hold?
Stated capacities here are 3 Ton, 2 to 3 Ton, and 3000 lbs per pad. Two listings state no capacity, so the safe move is a pad with a stated figure that covers the vehicle.
V groove or round pad: which shape fits a pinch weld?
A V groove cradles the pinch weld and keeps the frame rail from bending or scratching. One listing sells both shapes in one 8-piece pack, 4 round and 4 V groove, so the choice can wait until the car is on the lift.
Can pinch weld pads damage the paint?
The listings state the opposite: rubber pads protect painted or coated parts from scratches, dents and paint damage caused by metal lift arms. One listing notes the groove also guards painted or coated chassis parts.
Related: the best two post truck lift, the best hydraulic car lift, the best adjustable height jack stands and the car lifts hub.
