Best Boost Gauge Mount (2026): 5 Picks for Dash and Pillar

A boost gauge only helps if you can see it without looking away from the road. A single-hole mount puts the gauge at eye level on the dash or pillar, so the needle stays in view while you drive. The best boost gauge mount holds a 52mm gauge steady, fits the dash or pillar you have, and installs with screws or a pedestal base. This guide compares five mounts on gauge size, material, base size and install.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Fkewp Single Gauge Mounting Panel	9.6/10	Buy on Amazon
2	povtii Single Gauge Mounting Panel	9.6/10	Buy on Amazon
3	UHANBUT 52mm Gauge Mount	9.6/10	Buy on Amazon
4	Deaelf Universal Black 2" 52mm Single Hole Gauge	9.5/10	Buy on Amazon
5	Auto Meter 2204 Mounting Cup	9.5/10	Buy on Amazon

1

Fkewp Single Gauge Mounting Panel

Fkewp·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A carbon steel panel with a 2.1-inch hole for 52mm gauges, sized for sedans, trucks, RVs and SUVs, with screw mounting.

Check price on Amazon

Pros

• Names turbo boost gauges among the gauges it fits
• Premium carbon steel that resists bending and breaking
• 2.1-inch hole on a 2.7 by 0.7 inch base
• Clear install steps: align, screw, insert, adjust

Cons

• No warranty term stated
• The listing states both 2.1 inch and 54 mm for the hole
• Needs screws, so install is not tool-free
• No weight stated

2

povtii Single Gauge Mounting Panel

povtii·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A carbon steel panel with a 2.1-inch hole and a 2.7 by 0.7 inch base, in one or two-panel options.

Check price on Amazon

Pros

• Carbon steel that resists breaking and fading
• 2.1-inch hole with a 2.7 by 0.7 inch base
• One panel or a set of two to choose from
• Clear install steps with screws and angle adjustment

Cons

• No warranty term stated
• No gauge size in mm stated, only a 2.1-inch hole
• Needs screws for install
• No weight stated

3

UHANBUT 52mm Gauge Mount

UHANBUT·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An aluminum alloy mount at 2.72 by 0.67 inches for 52mm or 2-inch gauges, for cars, trucks and boats.

Check price on Amazon

Pros

• Aluminum alloy with rust prevention
• Most compact here at 2.72 by 0.67 inches
• Fits 52mm or 2-inch gauges
• Installs without complex tools

Cons

• No warranty term stated
• The listing treats 52mm and 2-inch as the same size
• Names furniture decoration projects, not a garage use
• Single hole only, so it holds one gauge

4

Deaelf Universal Black 2" 52mm Single Hole Gauge

Deaelf·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An ABS plastic pod, waterproof, for 2-inch and 52mm gauges on the dashboard or hood.

Check price on Amazon

Pros

• ABS plastic, waterproof and wear-resistant
• Fits 2-inch and 52mm gauges
• Installs on the dashboard or hood
• Single-hole design that blends into the interior

Cons

• No warranty term stated
• Plastic, not metal
• The largest here at 3.42 by 4.35 by 2.95 inches
• No weight stated

5

Auto Meter 2204 Mounting Cup

AUTO METER·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pedestal mounting cup with a black finish for 2-1/16 inch gauges, movable without damaging most surfaces.

Check price on Amazon

Pros

• Pedestal mount for dash, below dash or hood cowl
• Fits and comes off in seconds
• Movable without damaging most surfaces
• Black finish for a Pro-Street look

Cons

• No warranty term stated
• States 2-1/16 inch gauges only
• No material stated
• The listing states a three-layer structure without naming the layers

Compared on paper

Every rating comes from the brand’s listing and is not a shop test (gathered 11 November 2026). Gauge size is the hole the listing states for the mount.

How the points were given

Each mount is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. No listing here states a warranty term or a safety certification, so warranty and safety score nothing here.

No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. Safety is scored for corded, cordless and air tools and for listings that state safety features; hand tools without either are scored on 90 points.

What the listings tell you

Five listings were read for this guide. None states a warranty term, and none states a safety certification. Three state a 52mm or 2-inch gauge size, one states a 2.1-inch hole, and one states 2-1/16 inch gauges only. Two state carbon steel, one states aluminum alloy, one states ABS plastic, and one states no material.

Two listings disagree with themselves on size. The UHANBUT listing treats 52mm and 2-inch as the same size, while the Fkewp listing states a 2.1-inch hole and 54 mm in the same bullet. The Auto Meter listing states a three-layer structure to protect the interior, without naming the layers. The povtii listing offers one panel or a set of two, so check which option ships.

Buying guide: the best boost gauge mount for a 52mm gauge

Gauge size

Match the hole to the gauge. The UHANBUT, Fkewp and Deaelf mounts state 52mm or 2-inch gauges, the povtii mount states a 2.1-inch hole, and the Auto Meter cup states 2-1/16 inch gauges only. A 52mm gauge fits a 2.1-inch hole, so check the hole size before buying, not the brand name.

Material

Material decides how the mount ages. Carbon steel on the povtii and Fkewp mounts resists bending and breaking, per the listings, while aluminum alloy on the UHANBUT mount resists rust. ABS plastic on the Deaelf mount is waterproof and resists cracking, per the listing. The Auto Meter cup states no material, so the build is not scored on material.

Install

Install decides where the gauge ends up. The povtii and Fkewp mounts screw to the dashboard, the Deaelf pod fixes to the dashboard or hood, and the UHANBUT mount installs on smooth surfaces. The Auto Meter cup uses a pedestal mount and fits and comes off in seconds, per the listing, so it moves between spots without damage.

What the mount does not include

None of these listings includes a gauge. Each mount is a holder only, so the boost gauge itself is a separate purchase. Check the gauge size first, then the mount hole, then the base size against the dash or pillar.

Mount the gauge where it does not block your view of the road, and keep a firm grip on the wheel while driving.

Garage Fit Check

• Measure the gauge first: the mounts here fit 52mm or 2-inch gauges, except the Auto Meter cup, which states 2-1/16 inch gauges only.
• Measure the base: the povtii and Fkewp bases measure 2.7 inches by 0.7 inches, while the UHANBUT mount measures 2.72 inches by 0.67 inches.
• Check the install: the povtii and Fkewp mounts need screws, while the Auto Meter cup fits and comes off in seconds.
• Storage: the Deaelf pod measures 3.42 inches by 4.35 inches by 2.95 inches, the largest here, while the UHANBUT mount is the most compact at 2.72 inches by 0.67 inches.

FAQ: garage tools

What size gauge mount do I need for a boost gauge?

Match the mount hole to the gauge. A 52mm boost gauge fits the UHANBUT, Fkewp and Deaelf mounts and the 2.1-inch hole on the povtii mount. The Auto Meter cup states 2-1/16 inch gauges only, so check the gauge size before buying.

Where do I mount a boost gauge?

On the dashboard or pillar, at eye level, per the listings. The povtii and Fkewp mounts screw to the dashboard, the Deaelf pod fixes to the dashboard or hood, and the Auto Meter cup mounts on the dash, below the dash or on the hood cowl. Pick the spot that keeps the gauge in view without blocking the road.

Do boost gauge mounts include the gauge?

No. The listings here sell the mount only, with no gauge included. Buy the gauge to match the mount hole, then the mount to match the dash or pillar.

Are boost gauge mounts universal?

The listings here state universal fit for most cars, trucks and boats, but the hole size still matters. A 52mm gauge needs a 52mm or 2.1-inch hole, and a 2-1/16 inch gauge needs the Auto Meter cup. Check the hole size and the base size against your dash before buying.

Can I move a boost gauge mount between cars?

The Auto Meter cup fits and comes off in seconds without damaging most surfaces, per the listing, so it moves between spots. The screw-mounted panels need new screw holes in each car, so they suit a single install.

Related: the diagnostics and electrical hub, best vacuum gauge with mount, and our best air chuck inflator with pressure gauge.