Best Car Jack Oil (2026): 4 Picks for Floor and Bottle Jacks

A floor jack that creeps down under load or a bottle jack that will not hold its height usually needs fresh oil before it needs a new jack. The oil inside is a hydraulic fluid, and the wrong fluid or a low fill shows up as a slow lift and a load that sinks. This best car jack oil roundup compares the listings below on stated grade, additives, size and warranty, and marks what each listing leaves out.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	AW ISO 46 Hydraulic Oil, 1 Gallon	9.5/10	Buy on Amazon
2	MAG 1 00925 Hydraulic Jack Lubricating Oil	9.5/10	Buy on Amazon
3	Jack Oil, 32 oz.	9.3/10	Buy on Amazon
4	Bar's Leaks Jack Oil with Stop Leak - 12.5 oz	9.3/10	Buy on Amazon

1

AW ISO 46 Hydraulic Oil, 1 Gallon

ULTRA 1PLUS·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1-gallon jug of AW ISO 46 hydraulic oil with AW additives, stated for hydraulic jacks, lifts, tractors, presses and compressors.

Check price on Amazon

Pros

• Stated AW ISO 46 grade, the only grade stated in this guide
• AW additives shield vane, piston and gear pumps from friction
• Anti-foam agents and rapid water separation for smooth operation in hydraulic jacks
• Suitable as jack oil, tractor hydraulic fluid or snow plow hydraulic fluid

Cons

• No warranty term is stated
• 1-gallon jug is the largest here, so it needs a full shelf slot
• No pour spout or funnel is stated
• No jack-specific fill volume is stated

2

MAG 1 00925 Hydraulic Jack Lubricating Oil

Mag 1·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pack of 2 one-quart bottles of MAG 1 hydraulic jack oil, formulated with rust inhibitors, anti-wear agents and anti-foam agents for jacks and lifts.

Check price on Amazon

Pros

• Pack of 2 one-quart bottles for jacks and lifts
• Oxidation stable base oils with rust inhibitors
• Anti-wear agents and anti-foam agents stated
• FMX Technology, Friction Management for Xtreme protection, per the listing

Cons

• No grade is stated
• No warranty term is stated
• No compatibility with fluid types is stated
• No size options beyond the 1-quart pack are stated

3

Jack Oil, 32 oz.

Mag 1·9.3/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 32 oz bottle of Mag 1 jack oil, the only pick here with a stated 1-year manufacturer warranty.

Check price on Amazon

Pros

• 1-year manufacturer warranty stated, the only clear warranty term here
• 32 oz bottle, a middle size for a small jack fill
• Amber oil, a machine lubricant per the listing
• Made in the United States

Cons

• The thinnest listing here: no formula, grade or compatibility is stated
• Spec table reads 0.01 pounds while the bullets read a 6.33 lb package weight
• The listed package dimensions read 18.0 x 18.0 x 21.0 in, far larger than a 32 oz bottle
• No pour spout or funnel is stated

4

Bar's Leaks Jack Oil with Stop Leak - 12.5 oz

Bar's Leaks·9.3/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12.5 oz bottle of Bar's Leaks jack oil with stop leak, made to stop current leaks and help prevent future ones in floor and bottle jacks.

Check price on Amazon

Pros

• Stops current leaks and helps prevent future leaks
• Works in all floor and bottle jacks and with all snow plow fluids
• Non-corrosive, non-clogging and non-foaming
• Compatible with all petroleum based, mineral oil and synthetic fluids

Cons

• No warranty term is stated: the warranty line reads only the word Warranty
• No grade is stated
• 12.5 oz is the smallest bottle here
• No base oil or additive list is stated

Compared on paper

Specs such as CFM, PSI and torque are the manufacturer’s ratings as listed, collected 12 November 2026. Where a listing contradicts itself, both figures are shown.

How the points were given

Each oil is scored on performance, build, value, safety and warranty, using only what the listing publishes. No listing states a safety listing, so all score nothing on safety, and only the Mag 1 32 oz bottle states a clear warranty term. The weights are on our How We Pick page.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.

What the listings tell you

We read 4 jack oil listings for this guide. Only the ULTRA 1PLUS listing states a grade, AW ISO 46, while the other listings state no grade at all. Only the Mag 1 32 oz bottle states a warranty term, a 1-year manufacturer warranty, and the other warranty lines read only the word Warranty, with no term. No listing states a safety listing.

Sizes run from a 12.5 oz bottle to a 1-gallon jug, with a 1-quart pack of 2 in between. The Bar’s Leaks bottle is the leak-stop pick, made to stop current leaks and help prevent future ones. The ULTRA 1PLUS jug is the only listing that names tractors, presses and compressors alongside jacks, and the only one that lists larger sizes, from 1-gallon jugs to 5-gallon pails, 55-gallon drums and bulk totes.

Buying guide: choosing the best car jack oil

Grade and additives

Only the ULTRA 1PLUS listing states a grade, AW ISO 46, with AW additives for vane, piston and gear pumps. The MAG 1 quart listing states oxidation stable base oils with rust inhibitors, anti-wear agents and anti-foam agents. The Bar’s Leaks bottle states it is non-corrosive, non-clogging and non-foaming. Where a listing states no grade, match the oil to the jack maker’s manual rather than guessing from the bottle.

Leak-stop oil or plain oil

A jack that weeps oil needs a leak-stop bottle such as the Bar’s Leaks 12.5 oz pick, which states it stops current leaks and helps prevent future ones. A jack that simply needs a top-up or a full fill takes a plain hydraulic jack oil such as the MAG 1 quart pack or the ULTRA 1PLUS gallon jug. Do not expect a leak-stop bottle to fix a jack with a torn seal or a scored ram.

Size: top-up or full fill

Sizes here run from 12.5 oz to 1 gallon. A 12.5 oz bottle is the smallest here, a 32 oz bottle sits in the middle, and the 1-gallon jug is the largest here. Pick the size that matches the job: a top-up needs less than a full fill.

Compatibility

The Bar’s Leaks bottle states it works in all floor and bottle jacks and with all snow plow fluids, and that it is compatible with all petroleum based, mineral oil and synthetic fluids. The ULTRA 1PLUS jug states it is compatible with common seal materials and suitable as tractor hydraulic fluid, jack oil or snow plow hydraulic fluid. The MAG 1 quart listing states protection for hydraulic jack and lift equipment. Where a listing states no compatibility, check the jack maker’s manual before pouring.

Storage and handling

Keep jack oil sealed and upright on a shelf, away from dust and grit, and wipe the fill plug before opening it. The ULTRA 1PLUS jug weighs 7.46 pounds, and the MAG 1 quart pack weighs 2.06 pounds, so both sit steady on a shelf. Never get under a vehicle on a jack alone: use rated stands on solid, level ground.

Garage Fit Check

• Shelf space: the 1-gallon ULTRA 1PLUS jug measures 12.0 x 12.0 x 15.5 in, so give it a full shelf slot.
• Top-ups: the 12.5 oz Bar’s Leaks bottle suits a small top-up, and no funnel or spout is stated on any listing.
• Full fills: the 1-gallon jug and the 1-quart pack of 2 carry more oil for a full fill than the 12.5 oz bottle.
• Check before pouring: confirm the oil suits the jack, check the fill plug, and use rated stands on solid, level ground before working under a vehicle.

FAQ: garage tools

How do I replace hydraulic jack oil?

Follow the jack maker’s manual: drain the old oil, refill with the oil the manual calls for, and bleed the jack per the manual. The listings here state no fill procedure, so the manual is the source for the steps.

What is hydraulic jack oil made of?

The listings describe it as a hydraulic fluid with a base oil and additives: the MAG 1 listing names oxidation stable base oils with rust inhibitors, anti-wear agents and anti-foam agents, and the ULTRA 1PLUS listing names paraffinic base stocks with AW additives. The Bar’s Leaks bottle states compatibility with petroleum based, mineral oil and synthetic fluids.

How much hydraulic jack oil do I need?

It depends on the jack: the listings here range from a 12.5 oz bottle to a 1-gallon jug, with a 1-quart pack of 2 between them. Check the jack’s reservoir size in the manual, since no listing states a fill volume for a specific jack.

How do I clean hydraulic oil?

Wipe up spills with rags and a drip tray, and keep oil off the floor so it does not track underfoot. The listings state no cleanup guidance, so follow the product label and local rules for used oil.

How do I use hydraulic jack oil?

Pour it into the jack’s reservoir per the jack maker’s manual, and use it to top up a low jack or fill a jack after a drain. The Bar’s Leaks bottle also states it stops current leaks in floor and bottle jacks.

Related: the jacks and stands hub, best hydraulic jack oil with anti-wear additives, hydraulic floor jack repair, electric vs hydraulic floor jack, best scissor car jack, best adjustable height jack stands, and best bottle jack pneumatic.