Best Chop Saw for Metal (2026): 5 Picks Compared
Five chop saws for metal compared by blade type, power, miter range, weight and warranty, from cold-cut Evolution saws to an abrasive VEVOR and a compact Hoteche.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallEvolution S14MCS9.7/10View on Amazon - 2
Best with WarrantyEvolution S355CPSL9.6/10View on Amazon - 3
Best AbrasiveVEVOR Chop Saw9.5/10View on Amazon - 4
Best Simple PickDEWALT D287309.5/10View on Amazon - 5
Best CompactHoteche P805110A9.4/10View on Amazon - 6
DEWALT Chop SawView on Amazon - 7
APLMAN 6 Inch Cut off Saw Metal Cutting Chop Saw Miter SawView on Amazon
A garage project that needs clean cuts through angle iron and rebar is where a chop saw earns its floor space. When the cut must stay square and the edge must stay clean enough to weld, the best chop saw for metal is the tool that matches the job, not the biggest saw on the shelf. This list compares saws by blade, power, miter range, weight and warranty, so a home mechanic can pick the saw that fits the work ahead.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Evolution S14MCS: Cold cut saw with 3500+ cuts, +/-46 degree miter, brake and soft start. Check price on Amazon
- Best with Warranty Evolution S355CPSL: Dry-cut saw with chip deflector and a stated 3-year warranty. Check price on Amazon
- Best Abrasive VEVOR Chop Saw: Abrasive saw with 2300W, spark guard and a thick vise. Check price on Amazon
- Best Simple Pick DEWALT D28730: Straightforward 14-inch saw with quick-lock vise and 2300W motor. Check price on Amazon
- Best Compact Hoteche P805110A: Lighter 7-inch saw at 17.8 pounds with a UL-certified plug. Check price on Amazon
Picks for the garage
Evolution S14MCS 14" Mitering Chop Saw
For a fabricator who wants cold, burr-free cuts in mild steel; skip it if bench space or weight is tight, at 72.4 pounds.
Pros
- Cold cutting leaves a burr-free, weld-ready finish, per the listing
- EVOMAX blade is rated for 3500+ cuts in 4-inch mild steel
- Miter range reaches +/-46 degrees, wider than the 0-45 degree picks
- Soft start and electronic blade brake are stated safety features
Cons
- Heaviest pick at 72.4 pounds, so it suits a fixed bench
- No warranty term stated in the listing data
- Needs full blade speed before contact, per the listing guidance
- 15A motor rating is stated, with no wattage figure to compare against watt-rated picks
Evolution S355CPSL – Heavy Duty 14 Inch Metal
For a metalworker who wants dry, burr-free cuts with a stated warranty; skip it if a miter range beyond 45 degrees is needed.
Pros
- Dry-cut blade leaves a smooth, instantly workable finish, per the listing
- Pressed steel base described as lightweight in the listing
- Chip deflector directs debris away from the operator
- 3-year warranty with US-based support stated
Cons
- Miter range stops at 45 degrees, narrower than the S14MCS pick
- Spec-table weight of 1.0 pounds conflicts with the heavy-duty description, so weight is Not stated here
- No RPM figure stated in the listing data
- No cutting capacity in millimetres stated
VEVOR Abrasive Chop Saw 14in/35cm Blade 2300W
For a shop that wants an abrasive saw for steel bars, rebar, angle iron and aluminum; skip it if a burr-free, weld-ready finish is the priority.
Pros
- 2300W motor at 3600 RPM, per the listing
- Thicker vise with wave patterns for increased friction and clamping tightness
- Protective spark guard wraps the blade when lifting, per the listing
- 0-45 degree adjustable fence, with tool-less angle adjustment stated
Cons
- Abrasive cutting, not cold cutting, so finish differs from the Evolution picks
- No warranty term stated
- Title lists a wrench while the bullets describe tool-less adjustment, so check what is included
- No miter detents stated, unlike the S14MCS detents
DEWALT Chop Saw, 14-Inch (D28730)
For a mechanic who wants a straightforward 14-inch chop saw with a quick-lock vise; skip it if a stated warranty or RPM figure is required.
Pros
- 2300W motor with overload protection stated
- Quick-lock vise allows fast clamping on different size materials
- 45 degree pivoting fence for fast, accurate angle cuts
- Ergonomically designed handle, per the listing
Cons
- No RPM figure stated
- No warranty term stated
- Spec-table weight conflicts with a 14-inch chop saw, so weight is Not stated here
- No blade type stated beyond the 14-inch size
Hoteche 7-Inch Metal Cutting Chop Saw 1500W
For a small shop or DIY user who wants a lighter 7-inch saw for smaller stock; skip it if 14-inch capacity or a wide miter range is needed.
Pros
- 1500W copper motor at 8000 RPM no-load speed, per the listing
- Cuts round steel up to 50mm, square steel up to 45mm, and angle steel 60mm x 60mm
- UL-certified plug stated, with safety features
- Includes 1 cutting disc, 1 pair of carbon brushes, and a wrench
Cons
- 7-inch blade is smaller than the 14-inch picks
- No miter angle stated in the listing data
- No warranty term stated
- No 14-inch blade option stated in the listing
Other tools worth a look
DEWALT Chop SawCheck price on Amazon
APLMAN 6 Inch Cut off Saw Metal Cutting Chop Saw Miter SawCheck price on Amazon
Compared on paper
| Model | Shop Score | Blade | Power | Miter | Weight | Warranty |
|---|---|---|---|---|---|---|
| Evolution S14MCS | 9.7/10 | 14″ | 15A, 1,100 RPM | +/-46° | 72.4 pounds | Not stated |
| Evolution S355CPSL | 9.6/10 | 14″ | 15 Amp | 0-45° | Not stated | 3 years |
| VEVOR Chop Saw | 9.5/10 | 14″ | 2300W, 3600 RPM | 0-45° | 30.0 pounds | Not stated |
| DEWALT D28730 | 9.5/10 | 14″ | 2300W | 45° | Not stated | Not stated |
| Hoteche P805110A | 9.4/10 | 7″ | 1500W, 8000 RPM | Not stated | 17.8 pounds | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 2 November 2026.
How the points were given
Each saw is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A stated safety feature earns safety points, and only a stated warranty term earns warranty points.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Evolution S14MCS | 9.7 | 33 | 22 | 22 | 8 | 0 |
| Evolution S355CPSL | 9.6 | 28 | 20 | 20 | 5 | 3 |
| VEVOR Chop Saw | 9.5 | 27 | 19 | 20 | 7 | 0 |
| DEWALT D28730 | 9.5 | 26 | 20 | 19 | 5 | 0 |
| Hoteche P805110A | 9.4 | 22 | 18 | 19 | 8 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
The listings cover blade sizes from 7 inches to 14 inches, with cold-cut, dry-cut and abrasive designs in the same list. Miter range is stated for most picks, from 0-45 degrees to plus or minus 46 degrees, while one listing states no miter angle at all. Safety features differ by listing: a blade brake, a chip deflector, a spark guard, overload protection, and a UL-certified plug each appear on a different saw. Only one listing states a warranty term, so warranty points went to that saw alone.
Buying guide: the best chop saw for metal
Cold cut or abrasive
Cold-cut and dry-cut saws leave a burr-free finish that the listings describe as instantly workable, and the Evolution cold-cut listing calls its result weld-ready. An abrasive saw, like the VEVOR pick, grinds through steel bars, rebar, angle iron and aluminum with a spark guard in place, which suits rough cutting where finish matters less. Pick the blade type by the finish the next step needs: a weld-ready edge points to cold cutting, while general stock cutting points to abrasive.
Miter range
Most picks in this list cut angles from 0-45 degrees, which covers common angle cuts for frames and brackets. The Evolution S14MCS listing states a wider range, up to plus or minus 46 degrees, with detents and a stainless-steel gauge. If the work is all square cuts, miter range matters less than blade type and vise grip; if angled joints are regular work, the wider range is worth checking first.
Power and speed
Motor ratings in this list appear as amps on the Evolution saws and as watts on the other picks, so compare like with like and read the blade type alongside the rating. Speed figures also differ: the Evolution cold-cut saw runs at 1,100 RPM, the VEVOR abrasive saw at 3600 RPM, and the Hoteche saw at 8000 RPM no-load speed. A higher RPM figure does not by itself mean a better cut, because blade size and blade type change what the speed does at the metal.
Weight and space
Weight in this list runs from 17.8 pounds for the Hoteche saw to 72.4 pounds for the Evolution S14MCS saw, with the VEVOR saw in between at 30.0 pounds. A heavier saw suits a fixed bench where it can stay set up, while a lighter saw moves between jobs and storage more easily. Measure the bench against the listed dimensions before buying, and check that the vise and fence have room to swing through the full miter range.
For the next step, a bandsaw vs chop saw comparison helps when the cut list grows beyond straight chop cuts.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Measure the bench against the listed dimensions, including 17.5 inches x 27.75 inches x 21.6 inches for the largest saw in this list.
- Check the motor rating on the listing against the circuit available in the garage before the first job.
- Plan storage around weight: the 72.4 pound saw suits a fixed bench, while the 17.8 pound saw moves more easily.
- Before the first cut, check the blade, the vise grip, the spark guard or chip deflector, and the miter setting on the listing for that saw.
FAQ: garage tools
What blade size should I choose for metal?
Most picks here use a 14-inch blade, which suits general metal cutting in a home garage. The Hoteche pick uses a 7-inch blade and states capacities for round steel up to 50mm, square steel up to 45mm, and angle steel 60mm x 60mm, so match blade size to the stock size on the listing.
Is a cold-cut saw better than an abrasive saw?
It depends on the finish needed. Cold-cut and dry-cut listings describe a burr-free, instantly workable finish, while the abrasive listing describes grinding through steel bars and rebar with a spark guard. For weld-ready edges, the cold-cut listings make the stronger case; for rough stock cutting, the abrasive saw is the simpler match.
What miter range do these saws offer?
Most state 0-45 degrees, and the Evolution S14MCS states plus or minus 46 degrees with detents. The Hoteche listing states no miter angle, so check that listing if angled cuts are part of the work.
Do any of these saws carry a warranty?
Only one listing in this list states a warranty term: the Evolution S355CPSL, with a 3-year warranty and US-based support. The other listings state no warranty term, so check the listing for the saw being considered.
Related: our engine and shop equipment hub. Also see our best metal sawhorse. Also see our best F clamps for welding. Also see our best electric sander for metal.
