Best Drill Press X Y Table (2026): 5 Tables Compared

A bracket needs a row of holes in exactly the right spots, and nudging the workpiece by hand after every hole turns a short job into a long afternoon. The best drill press x y table moves the work under the bit with a handwheel instead of by hand, so each hole lands where it should. We compared 5 tables by X and Y travel, table size, groove pitch, material and mounting, using only what each listing publishes.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	ZOENHOU 12.2 Inch Milling Machine Worktable	9.7/10	Buy on Amazon
2	HFS (R) Multifunction Worktable Milling Working	9.6/10	Buy on Amazon
3	Fulton Drill Press Table 15" x 24" x 1 15" 24"	9.6/10	Buy on Amazon
4	MYSWEETY Multifunction Worktable Milling Working	9.6/10	Buy on Amazon
5	12.2 Inches Milling Machine Worktable	9.5/10	Buy on Amazon

1

ZOENHOU 12.2 Inch Milling Machine Worktable

ZOENHOU·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12.2 x 3.5 x 3 in multifunction cross table with a cast iron base and aluminum dovetail slides, X travel of 200 mm and Y travel of 50 mm, with a ruler that reads in inches and millimeters.

Check price on Amazon

Pros

• X travel of 200 mm and Y travel of 50 mm for moving work under the bit
• Cast iron base with aluminum dovetail slides
• Three T-shaped grooves with a groove distance of 34 mm
• Ruler reads in inches and millimeters, with a movable ruler for the X axis

Cons

• No warranty term is stated
• No safety certification is stated
• Package lists only 1 worktable, 1 accessories bag and 1 manual
• Stated for light duty machining, not heavy milling work

2

HFS (R) Multifunction Worktable Milling Working

HFS·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 310 x 90 mm multifunction cross table in dovetail aluminum with X travel of 200 mm and Y travel of 50 mm, a strong rigid structure and an M8X1.25 screw.

Check price on Amazon

Pros

• X travel of 200 mm and Y travel of 50 mm
• Strong rigid structure stated for higher standards of use
• Handwheel with zero adjustment, a circle of 1.25 mm and a grid of 0.05 mm
• Slot pitch of 34 mm for fixture mounting

Cons

• Assembly required, with instructions included
• No warranty term is stated
• No safety certification is stated
• No fence, hold downs or inserts stated in the package

3

Fulton Drill Press Table 15" x 24" x 1 15" 24"

Fulton Woodworking Tools·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15 x 24 x 1-3/8 in laminated drill press table with two tracks for jigs and fixtures, an aluminum L fence, hold downs and zero clearance inserts, plus a drum sander opening below the insert.

Check price on Amazon

Pros

• Thick laminated table, 15 x 24 x 1-3/8 in, laminated top and bottom to resist warping
• Two tracks run front to back and accept any 3/8 in hex head bolt
• Aluminum L fence, 2 hold downs and 2 zero clearance inserts included
• Drum sander opening below the insert fits a drum sander up to 3 in in diameter

Cons

• No X or Y slide travel is stated: this is a fixed table, not a cross slide table
• No warranty term is stated

4

MYSWEETY Multifunction Worktable Milling Working

MYSWEETY·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A mini multifunction cross table in dovetail aluminum with X adjustment of 180 mm and Y adjustment of 50 mm, a groove distance of 34 mm and a handwheel ring of 3 mm, needing no assembly.

Check price on Amazon

Pros

• X adjustment of 180 mm and Y adjustment of 50 mm
• Dovetail aluminum slides for a compact, accurate table
• No assembly required
• Handwheel with adjustable scale, a ring of 3 mm

Cons

• X adjustment of 180 mm, less than the longest X travel in this group
• No warranty term is stated
• No safety certification is stated
• Only the Silver finish stated in this listing

5

12.2 Inches Milling Machine Worktable

MUKLEI·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12.2 x 3.5 x 3 in aluminum multifunction worktable with 6 adjustable screws, 3 on the X axis and 3 on the Y axis, each with a lock-nut, for mini drills and drill brackets.

Check price on Amazon

Pros

• 6 adjustable screws with lock-nuts, 3 on each axis
• Premium aluminum alloy stated as sturdy, heavy-duty, anti-rust and corrosion-resistant
• Stated to move smoothly left, right, forward and backward
• Package includes the table, adjustable scale, travel screw, fixed jaw, cross-slide and base

Cons

• No X or Y travel figure is stated
• No warranty term is stated
• After-sales bullet mentions scissor jacks, which this table is not

Compared on paper

Specs are the manufacturer’s ratings as listed, collected 25 October 2026. Where a listing contradicts itself, both figures are shown.

How the points were given

Each table is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing states a safety certification, so every pick scores zero on safety, and no listing states a warranty term, so every pick scores zero on warranty.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score. Only powered tools, or tools with stated safety features, get safety points. Everything else is rated out of 90.

What the listings tell you

We read 5 listings. 3 state an X travel figure and a Y travel figure, and the same 3 state a groove pitch of 34 mm. Only 1, the Fulton, includes a fence, hold downs and zero clearance inserts. 2 state a load capacity. No listing states a safety certification or a warranty term.

How to choose the best drill press x y table

X and Y travel

Travel decides how far the work moves without unclamping. The ZOENHOU and HFS tables state X travel of 200 mm and Y travel of 50 mm, while the MYSWEETY states X adjustment of 180 mm and Y adjustment of 50 mm. The Fulton and MUKLEI state no travel figures, so check the listing before ordering if travel matters for the job.

Table size and grooves

Size decides what fits on the table. The cross tables measure 12.2 in long, except the MYSWEETY at 13.78 in wide, while the Fulton measures 15 x 24 in. 3 tables state a groove pitch of 34 mm for fixture mounting, and the ZOENHOU states three T-shaped grooves.

Materials and base

All 3 cross tables with stated travel use dovetail aluminum slides, and the ZOENHOU adds a cast iron base. The Fulton uses laminated MDF top and bottom to resist warping, with a smooth top for easy positioning of stock.

Mounting and fit

Mounting differs by table. The Fulton mounts with post knobs on a slotted factory table top, or with aluminum hold down clamps on any other style of table top. The ZOENHOU fixes to a mini bench drill with fixing screws and nuts, and the HFS suits bench drills. Check the drill press table before ordering.

Garage Fit Check

• Measure the drill press table first: the Fulton is 15 in deep, while the cross tables range from 3.5 in to 4.8 in deep.
• Check the mounting: post knobs fit a slotted factory table top, clamps fit any other style, and the ZOENHOU uses fixing screws and nuts.
• Check travel before ordering: 3 tables state X and Y travel, 2 do not.
• No power is needed: the cross tables move by handwheel or screw adjustment, and the Fulton is a fixed table.
• Store the fence, hold downs and inserts with the Fulton table so the kit stays complete.

FAQ: garage tools

How do I set up a drill press table?

Mount the table to the drill press table first. The Fulton mounts with post knobs on a slotted factory table top, or with aluminum hold down clamps on any other style. The ZOENHOU fixes to a mini bench drill with fixing screws and nuts. The HFS needs assembly, with instructions included.

Do I need a drill press for woodworking?

A drill press suits woodworking, metal working, plastic and composite drilling when straight holes or many holes in quick succession are needed, per the Fulton listing. A drill press table adds a flat surface, tracks for jigs and a fence for positioning.

What size drill press table do I need?

Match the table to the work and the press. The cross tables measure 12.2 in long, the MYSWEETY measures 13.78 in wide, and the Fulton measures 15 x 24 in. Measure the drill press table and the workpiece before ordering.

What is a drill press X-Y table?

An X-Y table is a cross slide table that moves the workpiece in two directions under the bit. The ZOENHOU and HFS tables move 200 mm in X and 50 mm in Y by handwheel, so holes can be placed without unclamping the work.

Related: the best drill press for small garage, the best drill press for beginners, benchtop vs floor drill press, mini mill vs drill press and our engine and shop equipment hub.