Best Fuse Puller (2026)
Fuse pullers for cars compared by jaw width, handle insulation, pack count and warranty.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAleric Puller 6 Pack9.6/10View on Amazon - 2
Best KitWinyxleng Puller Set9.6/10View on Amazon - 3
Best PrecisionBFXM Puller Pliers9.6/10View on Amazon - 4
Best Plastic SetAeaocvo Fuse Pullers9.5/10View on Amazon - 5
Ideal 34-001 Fuse PullerView on Amazon - 6
ZIBOO BP-FP-2 Cartridge Carded Fuse PullerView on Amazon - 7
Ideal Medium Safe-T-Grip Fuse PullerView on Amazon - 8
Ideal Industries Inc 34-001View on Amazon
A dead circuit leaves the radio silent and the dashboard dark, and fishing a small fuse out of a crowded panel with bare fingers only bends the fuse and scrapes the panel. This guide to the best fuse puller compares jaw width, handle insulation, pack count and warranty across the picks, so the tool that reaches the fuse fits the panel it has to work in.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you.
Quick picks
- Best Overall Aleric Puller 6 Pack: 6 pack with a forged metal relay plier, an insulating sleeve and a 60 days warranty. Check price on Amazon
- Best Kit Winyxleng Puller Set: 6 pack with 1 relay plier and 5 fuse pullers in different sizes, with a 1 years warranty. Check price on Amazon
- Best Precision BFXM Puller Pliers: Jaws adjustable from 0.78 to 3.94 inches, with an insulated handle and a fine tip. Check price on Amazon
- Best Plastic Set Aeaocvo Fuse Pullers: 5 pullers in 5 sizes and 5 colors, with plastic insulation for safe handling. Check price on Amazon
Picks for the garage
Aleric Relay Puller Pliers and Relay Fuse Remover
A 6 pack set of relay puller pliers and fuse remover tools with a forged metal relay plier, a stainless steel fuse tool, thin tips and offset handles for narrow fuse panels.
Pros
- 6 pack covers relay pliers and fuse tools for daily needs
- Forged metal relay plier with thin tips for narrow areas
- Handle covered with a red flexible insulating sleeve
- Blue fuse pulling tool is made of stainless steel
Cons
- Listing repeats the same claims across many bullets
- No jaw width range is stated
- No length is stated apart from the pack dimensions
- Warranty term is short at 60 days
Winyxleng Fuse & Relay Puller Pliers 6-Pack
A 6 pack set with 1 relay puller pliers and 5 fuse puller pliers in different sizes, in forged metal and 304 stainless steel with thin tips and offset handles for dashboards and fuse panels.
Pros
- 6 pack pairs 1 relay plier with 5 fuse pullers in different sizes
- Relay plier in forged metal for strength and durability
- Fuse pullers in 304 stainless steel and ABS engineering plastic
- Thin tips and offset handles reach confined dashboard spaces
Cons
- No insulation claim is stated for any handle
- No jaw width range is stated
- No length or weight is stated
- Warranty is listed as 1 years, in the listing wording
BFXM Relay Puller Pliers
A 2 piece plier set with a large relay pulling tool in high strength carbon steel and a small fuse pulling tool in 304 stainless steel, with an insulated handle and jaws adjustable from 0.78 to 3.94 inches.
Pros
- Jaws adjust from 0.78 to 3.94 inches for different relay and fuse sizes
- Relay plier in high strength carbon steel, impact resistant
- Small fuse tool in 304 stainless steel, corrosion resistant
- Red flexible insulated handle for non-slip and insulation
Cons
- No warranty term is stated
- Set covers only 2 pieces, with no spare fuse tool
- Weight is listed to many decimal places
- Offset handle design suits relays first, fuses second
5 Pcs Fuse Puller, 5 Sizes Automotive Fuse Puller
A set of 5 plastic fuse pullers in 5 distinct sizes and colors, red, black, yellow, white and blue, with a compact ergonomic design for narrow spaces and insulation for safe handling.
Pros
- 5 pullers in 5 sizes and 5 colors for quick identification
- Plastic build is lightweight, flexible and insulating
- Compact ergonomic design reaches narrow spaces
- Listed for cars, trucks, motorcycles and standard automotive fuses
Cons
- No dimensions or weight are stated
- No warranty term is stated
- Plastic build suits fuses only, with no relay plier included
- No jaw width range is stated
Bussmann Plastic 3 in. Fuse Puller - 1 Each
A plastic fuse puller listed as made in the United States, with a single puller per pack and conflicting length figures across the title and the spec table.
Pros
- Plastic build for simple fuse removal
- Made in the United States, per the listing
- Pack holds 1 puller for a spare in the glovebox
- Cartridge fuse puller style, per the listing title
Cons
- Title gives both 3 in and 5 in lengths, with no resolution
- Spec table dimensions of 3.65 by 9.95 by 0.9 inches read as pack dimensions
- Only 1 puller per pack, with no sizes or colors listed
- No warranty term is stated
Other tools worth a look
Ideal 34-001 Fuse PullerCheck price on Amazon
ZIBOO BP-FP-2 Cartridge Carded Fuse PullerCheck price on Amazon
Ideal Medium Safe-T-Grip Fuse PullerCheck price on Amazon
Ideal Industries Inc 34-001Check price on Amazon
Compared on paper
| Model | Shop Score | Type | Jaw width | Handle | Pack | Warranty |
|---|---|---|---|---|---|---|
| Aleric Puller 6 Pack | 9.6/10 | Plier set | Not stated | Insulating sleeve | 6 pieces | 60 days |
| Winyxleng Puller Set | 9.6/10 | Plier set | Not stated | Not stated | 6 pieces | 1 years |
| BFXM Puller Pliers | 9.6/10 | Plier set | 0.78 to 3.94 inches | Insulated | 2 pieces | Not stated |
| Aeaocvo Fuse Pullers | 9.5/10 | Plastic set | Not stated | Insulating plastic | 5 pieces | Not stated |
| Bussmann Fuse Puller | 9.3/10 | Plastic puller | Not stated | Not stated | 1 each | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 30 October 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each puller is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Insulated handles earn safety points where the listing states insulation, and a clear warranty term earns warranty points where the listing states a term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Aleric Puller 6 Pack | 9.6 | 29 | 21 | 21 | 5 | 2 |
| Winyxleng Puller Set | 9.6 | 30 | 22 | 21 | 0 | 3 |
| BFXM Puller Pliers | 9.6 | 30 | 22 | 20 | 5 | 0 |
| Aeaocvo Fuse Pullers | 9.5 | 26 | 19 | 21 | 4 | 0 |
| Bussmann Fuse Puller | 9.3 | 23 | 19 | 18 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
The 5 listings cover a plastic puller set, plier sets in 6 packs, and a 2 piece plier set with adjustable jaws. Jaw width is stated only for the BFXM set, at 0.78 to 3.94 inches, while the other sets state pack counts of 5 and 6 pieces instead of jaw figures. Warranty is stated for 2 listings, at 1 years and at 60 days, and insulation is stated for 3 listings.
Buying guide: best fuse puller
Jaw width and fuse size
Jaw width decides whether a puller grips a fuse or a relay without slipping. The BFXM set states jaws adjustable from 0.78 to 3.94 inches, which covers different sizes of relays and fuses in a panel. Sets that state no jaw figure instead offer several pullers in different sizes, so the right size comes from the set rather than from an adjustment.
Pliers or plastic pullers
Pliers suit relays and fuses in narrow panels, with thin tips and offset handles that reach where hands cannot. Plastic pullers suit fuses alone, with a compact ergonomic shape and insulation for safe handling. A relay plier in forged metal adds strength for stiff relays, while a plastic puller adds lightness and color coding for quick identification.
Insulation and grip
Insulation matters on an electrical tool, since a fuse panel sits close to live circuits. The BFXM set lists a red flexible insulated handle, the Aleric set lists a red flexible insulating sleeve, and the plastic set lists insulation for safe handling. A non-slip grip also matters, since a puller that slips can damage a fuse or a nearby component.
Pack count and storage
Pack count runs from 1 puller to 6 pieces across these listings, and the right count depends on how many vehicles and panels the set must serve. A 6 pack with a relay plier plus fuse pullers covers relays and fuses together, while a 5 piece plastic set covers fuse sizes in 5 colors. A lone puller suits a glovebox spare, but it cannot cover a relay job.
Warranty and listing gaps
Warranty terms are thin across the set: 1 years on the Winyxleng set and 60 days on the Aleric set, with no term stated for the other picks. Listing gaps also matter: the plastic set states no dimensions or weight, and the Bussmann listing states conflicting lengths. Where a listing conflicts with itself, both figures are shown rather than picking a winner.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Check the jaw width against the relays and fuses in the panel: BFXM jaws run from 0.78 to 3.94 inches.
- Check the handle: insulated handles are stated for BFXM, Aeaocvo and Aleric picks.
- Check the count: sets run from 1 puller to 6 pieces, so match the set to the vehicles it must serve.
- Check storage: thin tips and offset handles suit narrow dashboard spaces and fuse panels.
- Check the warranty term before a job: Winyxleng states 1 years and Aleric states 60 days, with no term stated for the other picks.
FAQ: garage tools
What is a fuse puller?
A fuse puller is a tool for removing and installing fuses and relays in a vehicle, without using bare fingers in a crowded panel. Pliers versions grip relays and fuses with thin tips, while plastic versions grip fuses in a compact shape that fits narrow spaces.
Do you need a fuse puller?
A fuse puller helps wherever hands cannot reach, such as narrow dashboard spaces, relay boxes and fuse panels. Thin tips and offset handles reach confined spaces and reduce the risk of damaging surrounding components, per the listings.
How do you use a fuse puller?
For the BFXM pliers, the listing states adjusting the jaws to the proper width, aligning them with the sides of the relay, pressing down on the offset handle and lifting up in a smooth motion. Plastic pullers work by gripping the fuse body and pulling it straight out of the panel.
What sizes do fuse pullers come in?
Sizes here run from a single plastic puller to 5 pullers in 5 distinct sizes and colors, and to 6 pack plier sets with a relay plier plus fuse pullers. The BFXM set states jaws adjustable from 0.78 to 3.94 inches for different relay and fuse sizes.
Do fuse pullers come with a warranty?
Warranty terms here are 1 years on the Winyxleng set and 60 days on the Aleric set, quoted exactly as listed. No warranty term is stated for the BFXM, Aeaocvo or Bussmann listings.
Related: the best fuse puller hub, the automotive fuse kit, the wire stripper hand tool and the wire crimping tool.
