Best Impact Screwdriver Bits (2026): 5 Sets Compared
Five impact screwdriver bit sets for impact drivers and drills, from a 27-piece mixed set to long Phillips bits, compared by size, length and steel.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGEINXURN 27-Piece Set9.6/10View on Amazon - 2
Best Long BitsBosch ITPH26B 10-Pack9.5/10View on Amazon - 3
Best Bulk SetGEINXURN 45-Pack Set9.5/10View on Amazon - 4
Best Multi-LengthDCWecher 12-Pack PH29.5/10View on Amazon
A screw strips when the bit does not fit, and a weak bit rounds off after a few fasteners. An impact driver makes it worse, hammering the tip until it twists or snaps, and a rounded screw head turns a small job into a long one. The best impact screwdriver bits fit the screw, absorb the hammering and keep their edges through job after job. This guide compares five bit sets for impact drivers and drills, from a mixed set with every common drive to long Phillips bits for deep screws.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall GEINXURN 27-Piece Set: 27 pieces across Phillips, Torx, Square and Slotted in 1 and 2 inch lengths, with a holder and magnetic tips. Check price on Amazon
- Best Long Bits Bosch ITPH26B 10-Pack: 10 Phillips #2 bits at 6 inches with an Xtended torsion zone, rated 10x life over standard impact bits by the maker. Check price on Amazon
- Best Bulk Set GEINXURN 45-Pack Set: 45 mixed insert bits with a magnetic bit holder and a 1/4-inch hex shank. Check price on Amazon
- Best Multi-Length DCWecher 12-Pack PH2: 12 Phillips #2 bits in 6 lengths from 1 to 6 inches for open and deep screws. Check price on Amazon
Picks for the garage
Geinxurn 27 Piece Impact Screwdriver Bits Set
A 27-piece set with 13 bits at 1 inch and 13 at 2 inches across Phillips, Torx, Square and Slotted drives, plus a magnetic bit holder.
Pros
- 27 pieces across 4 drive types in 2 lengths
- Color-coded base for quicker selection, per the maker
- Impact Shock Absorbent Zone for high-torque impact drivers
- Magnetic tips help prevent dropped screws, per the maker
Cons
- No warranty term is stated
- No shank size is stated
- Only 1 holder for the whole set
- No single length beyond 2 inches is offered
BOSCH ITPH26B 10-Pack 6 In. Phillips #2 Impact
A 10-pack of 6 in Phillips #2 bits with an Xtended torsion zone and laser-etched markings, built for high-torque impact drivers.
Pros
- 6 in length for deep access
- Xtended torsion zone absorbs high torque, per the maker
- 10x life over standard impact bits, per the maker
- Laser-etched markings on a high-visibility sleeve
Cons
- Phillips #2 only, with no other drive types
- No magnetic tip is stated
- No shank size is stated
- No warranty term is stated
GEINXURN Impact Tough Magnetic Mixed 45Pack Insert
A 45-piece mixed insert bit set in S2 alloy steel with a magnetic bit holder and an Impact Shock Absorbent Zone.
Pros
- 45 pieces, the largest set here
- Impact Shock Absorbent Zone for high-torque impact drivers
- 1/4-inch (6.35 mm) hex shank stated
- Magnetic bit holder included
Cons
- No drive-type breakdown is stated for the 45 bits
- No bit lengths are stated
- No warranty term is stated; the listing states a customer-first service promise instead
- No color coding is stated
DCWecher 12-Pack Phillips Bits #2 Impact Magnetic
A 12-pack of magnetic Phillips #2 bits in 6 lengths from 1 to 6 inches, in heat-treated S2 alloy steel with CNC-machined tips.
Pros
- 6 lengths from 1 to 6 inches for open and deep screws
- Magnetic tips and 1/4-inch hex shank
- CNC-machined tips for a clean fit and less cam-out, per the maker
- Black phosphate finish helps reduce surface rust in storage, per the maker
Cons
- Phillips #2 only, with no other drive types
- The bullets read 'these 2 Phillips bits' in a listing titled as a 12-pack
- No warranty term is stated
- No holder is stated
DYRECELVE 10-Piece Phillips Bits #2 Impact
A 10-piece set of matching 2-inch Phillips #2 bits in heat-treated S2 steel, with magnetic tips and a holder.
Pros
- 10 matching PH2 bits, so spares are ready
- Magnetic tips assist with compatible steel screws
- 1/4-inch hex shank fits impact drivers, drills and bit holders
- Clear PH2 size marking on each bit, with a holder included
Cons
- Single size only, Phillips #2 at 2 inches
- No warranty term is stated
- No torsion zone is stated
- No longer bits for deep screws
Compared on paper
| Model | Shop Score | Pieces | Drives | Lengths | Material | Shank | Warranty |
|---|---|---|---|---|---|---|---|
| GEINXURN 27-Piece Set | 9.6/10 | 27 | Phillips, Torx, Square, Slotted | 1 and 2 in | S2 alloy steel | Not stated | Not stated |
| Bosch ITPH26B 10-Pack | 9.5/10 | 10 | Phillips #2 | 6 in | Not stated | Not stated | Not stated |
| GEINXURN 45-Pack Set | 9.5/10 | 45 | Mixed | Not stated | S2 alloy steel | 1/4 in hex | Not stated |
| DCWecher 12-Pack PH2 | 9.5/10 | 12 | Phillips #2 | 1, 2, 2.56, 3.5, 4, 6 in | S2 alloy steel | 1/4 in hex | Not stated |
| DYRECELVE PH2 10-Pack | 9.4/10 | 10 | Phillips #2 | 2 in | S2 steel | 1/4 in hex | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 1 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each bit set is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a safety listing or a warranty term, so all score zero on safety and warranty.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| GEINXURN 27-Piece Set | 9.6 | 32 | 22 | 22 | 0 | 0 |
| Bosch ITPH26B 10-Pack | 9.5 | 32 | 22 | 20 | 0 | 0 |
| GEINXURN 45-Pack Set | 9.5 | 30 | 21 | 21 | 0 | 0 |
| DCWecher 12-Pack PH2 | 9.5 | 30 | 21 | 20 | 0 | 0 |
| DYRECELVE PH2 10-Pack | 9.4 | 28 | 20 | 19 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
We read five impact screwdriver bit listings. Two are single-size Phillips #2 sets, at 2 inches and 6 inches, while three mix sizes or drive types. All five state S2 steel or S2 alloy steel, and all five state heat treatment. Four state magnetic tips, and three state a 1/4-inch hex shank. None states a warranty term, and none states a safety listing.
Buying guide: best impact screwdriver bits
Match the bit to the screw
Phillips #2 is the common size here: DYRECELVE, Bosch and DCWecher are all PH2 sets. The 27-piece GEINXURN set adds PH1, PH3, Square and Torx plus Slotted, while the 45-pack is mixed with no stated breakdown, so check the drive types before buying.
Length
A 1 inch bit suits open screws, a 2 inch bit suits general work, and a 6 inch bit reaches deep fasteners. DCWecher covers 1, 2, 2.56, 3.5, 4 and 6 inches in one set, Bosch is 6 inches only, and DYRECELVE is 2 inches only, so match the length to the depth of the screw.
Steel and torsion zones
All five sets state S2 steel or S2 alloy steel with heat treatment. Bosch states an Xtended torsion zone to absorb the high torque of impact drivers, and both GEINXURN sets state an Impact Shock Absorbent Zone. DYRECELVE and DCWecher state no torsion zone.
Magnetic tips and holders
Magnetic tips help hold screws while positioning, and the 45-pack comes with a magnetic bit holder. DYRECELVE and the 27-piece set include a holder too, while Bosch uses a high-visibility sleeve with laser-etched markings to make the size easy to spot.
How many bits
A 10-piece set of matching Phillips #2 bits covers one common size with spares ready, while a 27-piece or 45-piece mixed set covers more drive types in one purchase. DCWecher sits between the two, with 12 bits in 6 lengths of a single size.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Storage: the DYRECELVE, 27-piece and 45-pack sets include a holder; the Bosch sleeve carries laser-etched markings for user convenience.
- Shank: DYRECELVE, DCWecher and the 45-pack state a 1/4-inch hex shank; Bosch and the 27-piece state no shank size, so check the listing before buying.
- Lengths: the picks run from 1 inch to 6 inches, so match the bit to the depth of the screw.
- Drive types: only the 27-piece lists Torx, Square and Slotted alongside Phillips; the other sets are Phillips #2 or mixed without a stated breakdown.
- Warranty: no pick states a warranty term, so keep the listing details for the set you buy.
FAQ: garage tools
What is the best screwdriver bit set?
The 27-piece GEINXURN set is the top pick here for variety, with 27 pieces across 4 drive types in 1 and 2 inch lengths. For long Phillips bits, the Bosch 10-pack at 6 inches is the pick, and for bulk the 45-pack is the pick.
Are screwdriver bits universal?
Not as the listings state them. Three picks state a 1/4-inch hex shank that fits compatible impact drivers, drills and bit holders, while Bosch and the 27-piece state no shank size, so check the shank and the drive type before buying.
How many bits do I need?
It depends on the screws you drive. A 10-piece set of matching Phillips #2 bits covers one common size with spares, while a 27-piece or 45-piece mixed set covers more drive types in one purchase.
Do impact bits need a torsion zone?
The listings differ. Bosch states an Xtended torsion zone to absorb high torque, and both GEINXURN sets state an Impact Shock Absorbent Zone. DYRECELVE and DCWecher state no torsion zone, so compare the listings before choosing.
What drive types do these sets cover?
Phillips #2 is in every set here, and the 27-piece adds PH1, PH3, Square, Torx and Slotted. The 45-pack is mixed with no stated breakdown, so the drive types in that set are not stated.
Related: best drill bit set. Also see our best screwdriver bit organizer. Also see our hammer drill vs impact driver. Also see our best hex shank drill bit set. Also see our best cordless screwdriver 8V. Also see our best torx screwdriver set.
