Best Hole Saw Kit (2026): 5 Kits Compared
Five hole saw kits, from a compact 5-saw carbon steel set to a 25-piece kit with saws from 3/4 inch to 6 inches, compared by size range, material and arbors.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBosch HSBIM9 Kit9.5/10View on Amazon - 2
Best Bi-Metal ValueAmazon Basics 9-Piece9.5/10View on Amazon - 3
Best Big SetANGELSWORD 24-Piece9.5/10View on Amazon - 4
Best Size RangeKATA 25-Piece Kit9.4/10View on Amazon - 5
Best Small KitKATA 8-Piece Kit9.4/10View on Amazon
A door needs a new lock hole, a desk needs a cable pass-through, and a vent needs a round opening in drywall. A hole saw cuts that circle cleanly, and a kit keeps the sizes a garage job calls for together in a case. This guide compares the best hole saw kit across the listings in this roundup, from a compact set for soft materials to a bi-metal kit that cuts mild steel.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Bosch HSBIM9 Kit: Bi-metal saws with 8% cobalt alloy, two SpinLOCK arbors and a progressor tooth design. Check price on Amazon
- Best Bi-Metal Value Amazon Basics 9-Piece: Six bi-metal saws from 25/32 inch to 2-11/16 inches with two arbors and 75mm pilot drills. Check price on Amazon
- Best Big Set ANGELSWORD 24-Piece: Fourteen saws from 3/4 inch to 6 inches with double-ground teeth and two installation plates. Check price on Amazon
- Best Size Range KATA 25-Piece Kit: Saw sizes from 3/4 inch to 6 inches with a wrench, installation plate and case. Check price on Amazon
- Best Small Kit KATA 8-Piece Kit: Five saws from 1 inch to 2-1/8 inches with a mandrel, drill bits and a storage case. Check price on Amazon
Picks for the garage
BOSCH HSBIM9 9-Piece Bi-Metal Hole Saws Assorted
A 9-piece bi-metal kit with six hole saws, two SpinLOCK universal arbors and a steel pilot bit, for wood, aluminum, metal and plastic.
Pros
- Bi-metal saws with 8% cobalt alloy for increased durability
- Two SpinLOCK universal arbors fit all brands and sizes, per the listing
- Progressor tooth design with alternating teeth for better performance
- Reinforced shoulders add strength and longer life, per the listing
Cons
- No warranty term is stated
- No saw sizes are stated in the listing
- Spec table lists NumberOfItems as 1 against a 9-piece title
- No cutting depth is stated
Amazon Basics 9-Piece Bi-Metal High Speed Steel
A 9-piece bi-metal kit with six hole saws from 25/32 inch to 2-11/16 inches, two arbors and a hex key.
Pros
- Six bi-metal HSS-M3 saws from 25/32 inch to 2-11/16 inches
- Two hex arbors with 75mm pilot drills cover 14-30mm and 32-152mm saws
- Cuts mild steel, aluminum, plastic and plasterboard
- Powder-coated finish for smooth cuts and durability, per the listing
Cons
- No warranty term is stated
- Spec table lists NumberOfItems as 1 against a 9-piece title
- No cutting depth is stated
- No storage slots are described for the carrying case
ANGELSWORD Hole Saw Kit,Hole Saw Set,24pc
A 24-piece kit with 14 hole saws from 3/4 inch to 6 inches, double-ground teeth and a 1-inch cutting depth.
Pros
- Fourteen saws from 3/4 inch to 6 inches
- Double-ground teeth the maker claims are 1.5X faster and 1.7X smoother
- Two mandrels, five drill bits, a hex key wrench and two installation plates
- High carbon steel with 2X lifespan, per the listing
Cons
- No warranty term is stated
- Cannot be used on hard wood, cement, glass or metal, per the listing
- Spec table lists NumberOfItems as 1 against a 24-piece title
- No case is stated in the listing
KATA 25 Piece Hole Saw Kit with 3/4"-6" for Wood
A 25-piece kit with hole saws from 3/4 inch to 6 inches, a wrench, mandrels and an installation plate.
Pros
- Saw sizes from 3/4 inch to 6 inches
- Wrench (19-22mm), installation plate and hex key included
- Heat treated carbon steel with black coating and sharp teeth
- Customized heavy duty case with designated slots
Cons
- No warranty term is stated
- Title says 25 pieces while the spec table lists 20
- Not intended for thick metal, tile, concrete or stone, per the listing
- Not for cutting depths beyond about 1 inch
KATA 8PCS Hole Saw Kit 1" to 2-1/8" for Wood
An 8-piece kit with five hole saws from 1 inch to 2-1/8 inches, a mandrel, drill bits and a storage case.
Pros
- Five common sizes from 1 inch to 2-1/8 inches
- Heat-treated carbon steel with a black coating for clean cutting
- Works with a standard electric drill or impact drill, per the listing
- Clear plastic storage case keeps the kit organized
Cons
- No warranty term is stated
- Title says 8 pieces, bullets list 9 pieces and the spec table lists 6
- Not intended for metal, stainless steel, tile, stone or concrete, per the listing
- Not for cutting depths beyond about 1 inch
Compared on paper
| Model | Shop Score | Size range | Material | Cutting depth | Arbors | Extras | Warranty |
|---|---|---|---|---|---|---|---|
| Bosch HSBIM9 Kit | 9.5/10 | Not stated | Bi-metal, 8% cobalt | Not stated | 2 SpinLOCK | Steel pilot bit, case | Not stated |
| Amazon Basics 9-Piece | 9.5/10 | 25/32 in to 2-11/16 in | Bi-metal HSS-M3 | Not stated | 2 hex, 75mm pilot | Hex key, case | Not stated |
| ANGELSWORD 24-Piece | 9.5/10 | 3/4 in to 6 in | High carbon steel | 1 in | 2 mandrels | 5 bits, 2 plates | Not stated |
| KATA 25-Piece Kit | 9.4/10 | 3/4 in to 6 in | Carbon steel | About 1 in | Mandrels | Wrench, plate, case | Not stated |
| KATA 8-Piece Kit | 9.4/10 | 1 in to 2-1/8 in | Carbon steel | About 1 in | 1 mandrel | 2 bits, hex key, case | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 1 November 2026. Where a listing contradicts itself, both figures are shown.
How the kits were scored
Each kit is scored on performance, build, value, safety and warranty, using only what the listing publishes. None states a safety listing, so all score zero on safety, and no listing states a clear warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bosch HSBIM9 Kit | 9.5 | 32 | 22 | 20 | 0 | 0 |
| Amazon Basics 9-Piece | 9.5 | 30 | 21 | 21 | 0 | 0 |
| ANGELSWORD 24-Piece | 9.5 | 29 | 21 | 21 | 0 | 0 |
| KATA 25-Piece Kit | 9.4 | 28 | 20 | 20 | 0 | 0 |
| KATA 8-Piece Kit | 9.4 | 27 | 19 | 19 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
Best hole saw kit: what the listings tell you
The Bosch and Amazon Basics kits cut mild steel and aluminum, while the KATA and ANGELSWORD kits are for soft materials only. The Bosch kit lists no saw sizes, and the KATA and ANGELSWORD kits state a cutting depth of about 1 inch.
The KATA 8-piece title says 8 pieces, the bullets list 9 pieces and the spec table lists 6. The Amazon Basics, ANGELSWORD and Bosch spec tables each list 1 item against kits of 9, 24 and 9 pieces.
Buying guide: choosing a hole saw kit
Size range
Match the range to the holes the garage calls for. The KATA 25-piece kit and the ANGELSWORD kit span 3/4 inch to 6 inches, the Amazon Basics kit spans 25/32 inch to 2-11/16 inches, and the KATA 8-piece kit spans 1 inch to 2-1/8 inches. The Bosch kit lists no saw sizes, so check the listing before buying.
Bi-metal or carbon steel
Bi-metal saws cut metal as well as wood and plastic. The Bosch kit uses bi-metal saws with 8% cobalt alloy, and the Amazon Basics kit uses HSS-M3 bi-metal steel. The KATA and ANGELSWORD kits use carbon steel and high carbon steel, and their listings state they are not for metal.
Arbors and pilot bits
An arbor holds the saw and centers it with a pilot bit. The Bosch kit includes two SpinLOCK universal arbors and a steel pilot bit, and the Amazon Basics kit includes two hex arbors with 75mm pilot drills. The KATA 8-piece kit includes one mandrel and two drill bits, and the ANGELSWORD kit includes two mandrels and five drill bits.
Cutting depth
The KATA kits and the ANGELSWORD kit state a cutting depth of about 1 inch, and the ANGELSWORD listing says to use the installation plate with saws larger than 2 inches. The Bosch and Amazon Basics listings state no cutting depth.
Storage case
The KATA 8-piece kit comes in a clear plastic storage case, the KATA 25-piece kit in a customized heavy duty case with designated slots, the Amazon Basics kit in a durable carrying case, and the Bosch kit in a plastic case. The ANGELSWORD listing states no case.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
Check these points on the listings before buying.
- Check the saw sizes before buying: the Bosch kit lists no saw sizes, so confirm the sizes in the listing.
- Check the count: the KATA 8-piece title says 8 pieces, the bullets list 9 pieces and the spec table lists 6.
- Match the material: the KATA and ANGELSWORD kits are for soft materials only and state they are not for metal.
- Mind the depth: the KATA kits and the ANGELSWORD kit state a cutting depth of about 1 inch.
- Keep the case in the garage: the KATA 25-piece case has designated slots that keep every saw blade in place.
FAQ: garage tools
What is a hole saw?
A hole saw is a cylindrical saw that cuts round holes in wood, drywall, plastic and metal, depending on the saw. The kits here cover round holes such as pipe openings, cable pass-throughs and vents.
How do you use a hole saw kit?
Fit the saw to the arbor, mount the pilot bit, and cut at low speed with the drill straight. The KATA 8-piece listing says to start at low speed, keep the drill straight and clear chips often, and the KATA 25-piece listing says to choose the correct saw size and avoid excessive pressure.
What is a hole saw arbor?
An arbor, also called a mandrel, holds the hole saw and centers it with a pilot bit. The Bosch kit includes two SpinLOCK universal arbors, the Amazon Basics kit includes two hex arbors with 75mm pilot drills, and the ANGELSWORD kit includes two mandrels.
Can a hole saw cut metal?
Yes, on the kits whose listings state it. The Bosch kit cuts wood, aluminum, metal and plastic, and the Amazon Basics kit cuts mild steel, aluminum, plastic and plasterboard. The KATA and ANGELSWORD kits state they are not for metal.
How deep can a hole saw cut?
The KATA kits and the ANGELSWORD kit state a cutting depth of about 1 inch. The Bosch and Amazon Basics listings state no cutting depth.
Related: the bi-metal vs carbide hole saw guide, the best hole saw carbide picks and the best hole saw for sheet metal picks, plus the best drill bit set and the cordless tools hub.
