Best Magnetic Nut and Bolt Tray (2026): 5 Trays Compared
Five magnetic nut and bolt tray sets for the home garage, compared by tray sizes, materials, pickup tools and warranty terms.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Top PickOEMTOOLS 260529.7/10View on Amazon - 2
Best Stainless SetHORUSDY 850109.7/10View on Amazon - 3
Best Collapsible SetTOOLEAGUE 3-Piece Set9.7/10View on Amazon - 4
Best Color CodingSHALL 4-Pack Set9.6/10View on Amazon - 5
Lisle 40900 Large Magnetic 1/2” Socket Tray RedView on Amazon - 6
GEARWRENCH 41" Mechanics Creeper with Magnetic TraysView on Amazon
A brake job leaves a bench covered in hardware, and a small pile of nuts beside the caliper can vanish into a drain pan or roll under the bench just when the caliper needs to go back on. A tray that holds that hardware in place, within reach and sorted by corner, turns a fiddly finish into a calm one. This guide compares the best magnetic nut and bolt tray options for a home garage, by tray sizes, materials, pickup tools and warranty terms.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Top Pick OEMTOOLS 26052: 4 collapsible trays in 4 colors, high tensile silica, and a limited lifetime warranty. Check price on Amazon
- Best Stainless Set HORUSDY 85010: Stainless steel trays plus a pickup tool that extends to 25 inches. Check price on Amazon
- Best Collapsible Set TOOLEAGUE 3-Piece Set: 3 silicone tray sizes plus a 15 lb magnetic pickup pen. Check price on Amazon
- Best Color Coding SHALL 4-Pack Set: 4 square silicone trays in red, blue, green and purple with dual-sided magnetic bases. Check price on Amazon
Picks for the garage
OEMTOOLS 26052 4-Pc Collapsible Magnetic Tray Set
A 4-pack of collapsible magnetic trays in green, blue, red and orange, made of high tensile silica, expanding to 2 inches deep and holding up to 2 lbs of parts.
Pros
- 4 colors help sort parts by job
- Magnetic base holds bolts and nuts during engine work
- Holds up to 2 lbs of parts and tools
- Collapsible design packs away compactly
Cons
- Listing gives 4-1/2 inch trays while the spec table lists 5 inch dimensions
- Spec table lists 3.38 inch height against a 2 inch expanded depth
- No pickup tool is included
- No stainless steel construction is stated
HORUDSY 4PC Magnetic Tray Set with Magnet Stick
A 4-piece set of stainless steel trays with a telescoping magnetic pickup tool that extends to 25 inches, including a 9.5 inch by 5.5 inch rectangular tray, a 6 inch round bowl and a 3.75 inch by 2.5 inch mini tray.
Pros
- Telescoping pickup tool reaches 25 inches into tight spaces
- Stainless steel trays with rubber-coated magnets resist scratching
- Trays hold parts on vertical surfaces, sideways or upside down
- 3 tray sizes cover small and large hardware
Cons
- No warranty term is stated
- No collapsible design is stated
- No color coding is stated
- No tray depth is stated
3Pcs Collapsible Magnetic Parts Tray Set with 15Lb
A 3-piece set of silicone trays in small, medium and large sizes, plus a 15 lb magnetic pickup pen, with trays that expand to 1.97 inches and collapse to 0.78 inches.
Pros
- 3 sizes cover small screws through large hardware
- Silicone trays protect finishes from scratches
- 15 lb magnetic pickup pen is included
- Trays clean with soap and water
Cons
- No warranty term is stated
- Red is the only color listed
- No round tray is included
- Pickup pen length range is not stated
SHALL New Version Collapsible Magnetic Parts Tray
A 4-pack of square silicone trays in red, blue, green and purple, each 4.5 inch by 4.5 inch, collapsing to 1-1/8 inches or expanding to 2 inches in depth, with dual-sided magnetic bases.
Pros
- Dual-sided magnetic bases give a wider holding surface
- 4 colors help color-code parts by job
- Silicone trays resist fluids and heat and protect finishes
- Collapse for easy carrying in a tool bag or pocket
Cons
- No warranty term is stated
- No pickup tool is included
- Square shape only, with no round or rectangular tray
- No stainless steel option is stated
4-Pack Magnetic Parts Tray Set
A 4-piece set of stainless steel trays with strong magnetic bases, including a 3.03 inch round tray, a 5.91 inch round tray, a small square tray and a large shallow tray.
Pros
- Stainless steel trays with a treated base resist slipping and scratching
- Magnetic bases hold parts upside down, sideways or on toolboxes
- Round and square shapes cover varied hardware
- Set suits auto repair and appliance maintenance
Cons
- No warranty term is stated
- No pickup tool is included
- Square tray sizes are not stated
- Title rounds tray sizes, so bullets give the precise figures
Other tools worth a look
Lisle 40900 Large Magnetic 1/2” Socket Tray RedCheck price on Amazon
GEARWRENCH 41" Mechanics Creeper with Magnetic TraysCheck price on Amazon
Best Magnetic Nut and Bolt Tray Compared
| Model | Shop Score | Trays | Material | Largest tray | Pickup tool | Warranty |
|---|---|---|---|---|---|---|
| OEMTOOLS 26052 | 9.7/10 | 4 trays | High Tensile Silica | 4-1/2 inch | Not stated | OEMTOOLS Limited Lifetime |
| HORUSDY 85010 | 9.7/10 | 3 trays and pickup tool | Stainless Steel | 9.5 inch by 5.5 inch | Extends to 25 inches | Not stated |
| TOOLEAGUE 3-Piece Set | 9.7/10 | 3 trays and pickup pen | Silicone | 11.02 inch by 7.09 inch | 15 lb pen | Not stated |
| SHALL 4-Pack Set | 9.6/10 | 4 trays | Silicone | 4.5 inch by 4.5 inch | Not stated | Not stated |
| GRENPRO 4-Pack Set | 9.6/10 | 4 trays | Stainless Steel | 5.91 inch round (largest stated) | Not stated | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 28 October 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each tray set is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None states a safety listing, and warranty terms are absent from most listings.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OEMTOOLS 26052 | 9.7 | 30 | 21 | 21 | n/a | 4 |
| HORUSDY 85010 | 9.7 | 32 | 22 | 21 | n/a | 0 |
| TOOLEAGUE 3-Piece Set | 9.7 | 32 | 21 | 21 | n/a | 0 |
| SHALL 4-Pack Set | 9.6 | 30 | 21 | 21 | n/a | 0 |
| GRENPRO 4-Pack Set | 9.6 | 29 | 22 | 20 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
The 5 listings split into 3 collapsible sets and 2 stainless steel sets. A pickup tool comes with 2 sets: a 15 lb pen with the TOOLEAGUE set and a tool that extends to 25 inches with the HORUSDY set. Color coding appears on 2 sets: 4 colors on the OEMTOOLS set and 4 colors on the SHALL set. Only the OEMTOOLS set states a warranty term, a limited lifetime warranty, while the other listings state no warranty term. Tray sizes run from a 3.03 inch round tray to an 11.02 inch by 7.09 inch large tray.
Buying guide: magnetic trays for the garage
Tray size and count
Match the tray to the hardware on the bench. A small tray at 5.31 inch by 3.15 inch suits screws and washers, while the large tray at 11.02 inch by 7.09 inch has room for bigger hardware from a brake job or a tire rotation. A 4-pack lets a mechanic sort parts by corner or by step, so a bolt from one wheel does not mix with a bolt from another.
Collapsible or rigid
Silicone trays collapse for storage: the TOOLEAGUE trays expand to 1.97 inches and collapse to 0.78 inches, and the SHALL trays collapse to 1-1/8 inches or expand to 2 inches in depth. The OEMTOOLS trays expand to 2 inches deep. No collapsible design is stated for the stainless steel sets, which trade pack-flat storage for a rigid tray that keeps its shape on the bench.
Magnet hold and placement
A magnetic base keeps hardware in place on a toolbox or a metal surface, and the GRENPRO and HORUSDY sets hold parts upside down or sideways as well. The SHALL set uses dual-sided magnetic bases for a wider holding surface. The HORUSDY trays use rubber-coated magnets and the GRENPRO trays use a treated base, both meant to protect surfaces from scratches.
Pickup tools
A dropped bolt under a bench or behind an engine calls for a pickup tool, and 2 sets here include one. The TOOLEAGUE set includes a 15 lb magnetic pickup pen, and the HORUSDY set includes a telescoping tool that extends to 25 inches. For longer reach options, see the best telescopic magnetic pickup tool.
Materials and finish care
Silicone trays are flexible and durable, protect finishes from scratches, and clean with soap and water. High tensile silica is listed for the OEMTOOLS trays as a durable material for regular garage use. Stainless steel trays are listed as durable too, with a treated or rubber-coated base to guard against slipping and marking.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Check bench and fender space against the largest tray: 11.02 inch by 7.09 inch on the TOOLEAGUE set.
- Collapsed trays pack flat: 0.78 inches for the TOOLEAGUE trays and 1-1/8 inches for the SHALL trays.
- No power source is needed: every tray here works from its magnetic base.
- Sort by color where offered: 4 colors on the OEMTOOLS set and 4 colors on the SHALL set.
FAQ: garage tools
What size magnetic tray holds lug nuts?
A larger tray suits lug nuts: the OEMTOOLS listing names lug nuts among its uses, and the large trays here run to 11.02 inch by 7.09 inch on the TOOLEAGUE set and 9.5 inch by 5.5 inch on the HORUSDY set.
Do magnetic trays work on a fender?
Yes, where the listing states it. The SHALL trays are listed as suitable for tool boxes or car fenders, and the GRENPRO trays attach to toolboxes and metal surfaces.
Can a magnetic tray hold parts upside down?
The GRENPRO and HORUSDY listings state that their trays hold parts upside down, sideways or on vertical surfaces, so hardware stays put when the tray is not sitting flat.
What does a collapsible tray change for storage?
A collapsible tray shrinks when the job is done: the TOOLEAGUE trays collapse to 0.78 inches and the SHALL trays collapse to 1-1/8 inches, so a set fits in a tool bag or a pocket.
Related: the tool storage hub, the best telescopic magnetic pickup tool, the best magnetic tool holder and the best socket organizer.
