Best Magnetic Pickup Tool for Lathe Chips (2026)

A lathe leaves a spray of sharp chips across the bench and the floor, and the simplest way to clear them is a magnet on a stick. The chips cling to the wand, the wand lifts them clear, and a quick release drops them in the bin. The best magnetic pickup tool for lathe chips is the one that gets to the pile, lifts the load and lets go cleanly. This guide compares the tools by reach, lift, release and kit size.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Evolution Power Tools Cyclone Magnetic Swarf	9.7/10	Buy on Amazon
2	4-Piece Telescoping Magnetic Pickup Tools Set	9.7/10	Buy on Amazon
3	GUTIMORE Magnetic Pickup Tool Pack of 2	9.6/10	Buy on Amazon
4	HORUSDY 4PCS Telescoping Magnetic Pick Up Tool	9.6/10	Buy on Amazon
5	HORUSDY 4 - PIECE Magnetic Pickup Tools Kit	9.6/10	Buy on Amazon

1

Evolution Power Tools Cyclone Magnetic Swarf

EVOLUTION·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A magnetic swarf and chip collector wand with a quick-release plunger, made for metal shavings and cuttings, collecting up to 6.5 kg.

Check price on Amazon

Pros

• Made for swarf, chips and metal shavings
• Quick-release plunger switches off the magnet
• Collects up to 6.5 kg of shavings
• Simple, heavy-duty design for the workshop

Cons

• No length is stated
• No warranty term is stated
• A single wand, not a kit with a tray or mirror
• No lift capacity in pounds is stated

2

4-Piece Telescoping Magnetic Pickup Tools Set

SEDY·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece set with a 31 in telescoping stick that lifts up to 15 lbs, a 25 in pen magnet, a 20 in flexible stick and a 3.7 in magnetic parts tray.

Check price on Amazon

Pros

• Telescoping stick lifts up to 15 lbs
• 31 in stick, 25 in pen magnet and 20 in flexible stick
• 3.7 in magnetic parts tray included
• Stainless steel with non-slip rubber grips

Cons

• The flexible stick states no lift capacity
• The pen magnet lifts only 1.5 lbs
• No warranty term is stated
• No quick release is stated

3

GUTIMORE Magnetic Pickup Tool Pack of 2

guti-more·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece set with a 25 in flexible pickup that lifts 2 lbs and a telescoping pickup from 6.7 in to 30 in that lifts 10 lbs.

Check price on Amazon

Pros

• Telescoping pickup lifts up to 10 lbs
• Extends from 6.7 in to 30 in
• 25 in flexible pickup for confined places
• Flexible tube bends freely for drains and gaps

Cons

• The flexible pickup lifts only 2 lbs
• No parts tray or mirror is included
• No warranty term is stated
• No quick release is stated

4

HORUSDY 4PCS Telescoping Magnetic Pick Up Tool

HORUSDY·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece kit with a 360° inspection mirror, two telescoping magnetic pickup tools and a 24 in flexible claw grabber.

Check price on Amazon

Pros

• 360° inspection mirror extends to 37.4 in
• Two telescoping magnets, 5 to 25.6 in and 6.9 to 29.5 in
• 24 in flexible claw grabber with 4 claws
• Non-slip handles and a pocket clip for carry

Cons

• No lift capacity is stated
• No warranty term is stated
• No parts tray is included
• No quick release is stated

5

HORUSDY 4 - PIECE Magnetic Pickup Tools Kit

HORUSDY·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece kit with telescoping magnets from 7 to 30.5 in and 5 to 25 in, a 14.4 in flexible pickup and a collapsible magnetic parts tray.

Check price on Amazon

Pros

• Telescoping magnet extends to 30.5 in
• 14.4 in bend-it flexible pickup for narrow spaces
• Collapsible magnetic parts tray with non-marring rubber
• Stated to prevent accidents from stray metal pieces

Cons

• No lift capacity is stated
• No warranty term is stated
• No mirror or claw grabber is included
• No quick release is stated

Compared on paper

Every rating comes from the brand’s listing and is not a shop test (gathered 11 November 2026).

How the points were given

Each tool is scored on performance, build, value, safety and warranty. How we pick explains the weights. Safety points need a stated safety listing or certification, and none of these listings states one. Warranty points need a stated term, and none of these listings states one.

No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. Only powered tools, or tools with stated safety features, get safety points. Everything else is rated out of 90.

What the listings tell you

All 5 listings are magnetic pickup tools, but only 1 is made for swarf and chips: the Evolution wand. 2 state a lift capacity, 15 lbs on the SEDY stick and 10 lbs on the GUTIMORE telescoping pickup, and 1 states a capacity in kilograms, 6.5 kg on the Evolution wand. Only 1 states a quick release, the Evolution plunger. None states a warranty term, and none states a safety listing or certification.

Buying guide: best magnetic pickup tool for lathe chips

Swarf wand or telescoping stick

The Evolution wand is the only tool here made for swarf and chips: wave it over the pile and the magnet holds the shavings. The telescoping sticks are made for dropped screws, bolts and tools, and they work for chips too, with a longer reach. A wand sweeps a pile fast; a stick gets into a gap. Pick the wand for the bench and the floor, and a stick for the corners the wand cannot reach.

Reach: how far the tool extends

The SEDY stick extends to 31 in, the GUTIMORE telescoping pickup to 30 in, and the HORUSDY 85034 to 30.5 in. The HORUSDY 85035 magnets extend to 25.6 in and 29.5 in, and its mirror extends to 37.4 in. The Evolution wand states no length. Longer reach means less bending over the pile.

Lift: what the magnet holds

The SEDY stick lifts up to 15 lbs, the GUTIMORE telescoping pickup lifts up to 10 lbs, and the GUTIMORE flexible pickup lifts up to 2 lbs. The Evolution wand collects up to 6.5 kg of shavings. The two HORUSDY kits state no lift capacity. A bigger lift matters for a pile of chips, and a smaller lift suits single screws and clips.

Release: how the chips come off

Only the Evolution wand states a quick release: a plunger switches off the magnetic attraction and drops the shavings where they are wanted. The other tools state no release, so the listings leave how the chips come off unclear. A quick release drops the load without handling the chips.

Kits, trays and mirrors

The SEDY set, the HORUSDY 85035 kit and the HORUSDY 85034 kit are all 4-piece sets. The SEDY set adds a 3.7 in magnetic parts tray, the HORUSDY 85034 adds a collapsible parts tray with non-marring rubber, and the HORUSDY 85035 adds a 360° inspection mirror and a 24 in claw grabber. The GUTIMORE set is a 2-piece pair, and the Evolution wand is a single tool. A tray holds the parts the magnet picks up, and a mirror finds the chips the eye cannot see.

After the chips are swept up, a parts tray keeps the small stuff sorted; see the parts tray magnetic guide for sizes and uses.

Garage Fit Check

• Hang the wand and sticks on a pegboard or in a drawer; the SEDY pen magnet has a pocket clip for carry.
• Check the reach before the first sweep: the sticks here extend to 30 in, 30.5 in and 31 in, and the wand states no length.
• The Evolution wand collects up to 6.5 kg of shavings, so empty it before the load gets heavy.
• No power is needed for any of these picks; they work by magnet alone.
• Store the tools where the magnet cannot grab other tools; the SEDY tray holds nuts, bolts and screws in one place.

FAQ: garage tools

What is the best way to pick up lathe chips?

Sweep a magnetic wand over the pile. The Evolution wand is made for swarf and chips, with a quick-release plunger that drops the load where it is wanted.

How much can a magnetic pickup tool lift?

It depends on the tool: the SEDY stick lifts up to 15 lbs, the GUTIMORE telescoping pickup lifts up to 10 lbs, and the Evolution wand collects up to 6.5 kg of shavings. The two HORUSDY kits state no lift capacity.

Do magnetic pickup tools have a quick release?

Only one here does. The Evolution wand has a quick-release plunger that switches off the magnetic attraction. The other tools state no release.

Can a magnetic pickup tool find dropped screws?

Yes, that is what the telescoping sticks are made for. The SEDY stick extends to 31 in, the GUTIMORE telescoping pickup extends to 30 in, and the HORUSDY 85035 adds a 360° inspection mirror for tight spaces.

Related: the best magnetic sweeper for garage floor nails, magnetic sweeper vs push broom, the best inspection mirror with swivel head, the best dial indicator for lathe, the best magnetic nut and bolt tray and our engine and shop equipment hub.