Best Oil Funnel: 4 Picks
Four automotive funnels for oil, fuel and coolant compared on capacity, screens, reach and fluid fit.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Best overallWirthCo 32002 Safety Funnel9.6/10View on Amazon - 2
Best for coolantEPAuto Coolant Funnel Kit9.6/10View on Amazon - 3
Best setKongNai Funnel 5-Pack9.6/10View on Amazon - 4
Long reachCartisen Long-Neck Funnel9.5/10View on Amazon
An oil change goes wrong at the funnel: oil down the side of the engine, coolant burping out of the filler neck, a funnel that will not stay put while you pour. The best oil funnel is the one that fits the filler, holds enough to pour without babysitting it, and keeps debris out of the system. These four funnels, from a screened safety funnel to a five-piece set with a hose, cover what the listings state for pouring oil, fuel and coolant in the garage. A funnel that seals to the filler, holds a useful amount and strains out debris turns a messy chore into a clean one.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best overall WirthCo 32002 Safety Funnel: 2 quart HDPE funnel with a 60 micron screen and a hang hole. Check price on Amazon
- Best for coolant EPAuto Coolant Funnel Kit: Spill-proof kit with a 5 in extension and a 45-degree elbow. Check price on Amazon
- Best set KongNai Funnel 5-Pack: Five funnels with a long hose, a mesh screen and a handle. Check price on Amazon
- Long reach Cartisen Long-Neck Funnel: 11.3 in long-neck funnel with raised sides and a 4.3 in opening. Check price on Amazon
The picks
WirthCo 32002 Red Safety Funnel
WirthCo 32002 red safety funnel for oil, fuel, gas and automotive use, with a 2 quart capacity and a 60 micron screen for filtration. It states a 6.5 inch top diameter, 8.5 inch height, 2-1/4 inch spout length and a hang hole, in chemical-resistant HDPE.
Pros
- 2 quart capacity, the largest stated here
- 60 micron screen for filtration
- HDPE with chemical and corrosion resistance
- Hang hole for storage
Cons
- Spec table says 1-pint against the 2 quart title
- Single funnel for one fluid at a time
- No warranty term is stated
- Red color shows stains
EPAuto Spill Proof Radiator Coolant Filling Funnel
EPAuto spill-proof radiator coolant filling funnel kit that prevents spills and trapped air during coolant fills. It includes a 5 inch extension bar and a 45-degree elbow for caps under shrouds or at an angle, with a 60 fluid ounce capacity.
Pros
- Spill-proof design for coolant fills
- Prevents trapped air per the listing
- 5 in extension and 45-degree elbow included
- 60 fluid ounce capacity stated
Cons
- For coolant, not oil
- Kit has more parts to store
- No screen is stated
- No warranty term is stated
Plastic Oil Funnels for Automotive Use Set of 5
KongNai set of 5 plastic funnels for automotive use: 1 large flexible long funnel with a hose and 4 regular funnels. It states a removable mesh screen, a wide mouth for rapid filling and a handle for one-handed steadying.
Pros
- Five funnels: one per fluid
- Long hose reaches buried fillers
- Removable mesh screen stated
- Handle for one-handed steadying
Cons
- Spec table quantities contradict the 5-count title
- No capacity is stated
- Thinner plastic than the HDPE pick
- No warranty term is stated
Long-Neck Oil Funnel for Automotive
Cartisen long-neck oil funnel for automotive use, 11.3 inches long with a 4.3 inch top opening and a 0.5 inch bottom opening. The listing states waterproof, impact-resistant flexible plastic, raised sides against dust and leaks, and angled spouts.
Pros
- 11.3 in reach for buried fillers
- 4.3 in wide top opening
- Raised sides reduce dust and leaks
- Waterproof, impact-resistant plastic stated
Cons
- Spec table pack quantities contradict the 1-pack title
- No capacity is stated
- No screen is stated
- No warranty term is stated
Compare the picks
| Funnel | Use | Capacity | Screen | Reach |
|---|---|---|---|---|
| WirthCo 32002 Safety Funnel | Oil, fuel, gas | 2 qt | 60 micron | Not stated |
| EPAuto Coolant Funnel Kit | Coolant | 60 fl oz | Not stated | 5″ |
| KongNai Funnel 5-Pack | Oil, gas, coolant | 5 funnels | Mesh, removable | Long hose, handle |
| Cartisen Long-Neck Funnel | Oil, gas, lubricants | Not stated | Not stated | 11.3″ |
Specifications are manufacturer rated, as published on each listing and collected 22 October 2026.
How we scored them
Each funnel is scored on performance, build, value, safety and warranty.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Buying guide: how to pick the best oil funnel
All four of these move liquid from a bottle into a filler neck, but they are built for different jobs. One is a coolant kit, one is a screened safety funnel, one is a five-piece set and one is a long-neck pourer. Here is how to match the funnel to the fluid.
Match the funnel to the fluid
The EPAuto kit is the specialist: a spill-proof radiator coolant filling funnel kit that the listing says prevents spills and trapped air, since trapped air pockets may cause erratic cooling system and heater performance. It is for coolant, not oil, and it ranks here as the coolant pick. The WirthCo 32002 is the all-rounder: the listing names oil, fuel, grease and alcohol, with a 60 micron screen for filtration. The KongNai set covers oil, gas and coolant across its five funnels, with a removable mesh screen for filtering foreign objects during oil, gas or coolant changes. The Cartisen long-neck names automotive oils, gas and lubricants for cars, trucks and SUVs. Buy the funnel for the fluid you pour most.
Capacity
Capacity decides how much attention the pour needs. The WirthCo holds 2 quarts, the largest stated capacity here, though its spec table also says 1-pint; the title and bullets state 2 quarts, so the title and bullets win. The EPAuto kit holds 60 fluid ounces. The KongNai and Cartisen listings state no capacity. A bigger funnel means fewer refills mid-pour and less chance of an overflow when the bottle glugs. The 60 fluid ounce EPAuto kit sits between the two, sized for a cooling system fill rather than quart-by-quart topping.
Screens and filtration
Two funnels state a screen. The WirthCo has a 60 micron screen with a hang hole for storage, and its HDPE body offers chemical and corrosion resistance. The KongNai set has a removable mesh screen filter strainer on the funnel with the tube. The EPAuto and Cartisen listings state no screen. A screen catches the debris that ruins a fresh oil change: gasket bits, dust from the bottle threads, whatever was sitting in the funnel since last time.
Reach and access
Some fillers hide under shrouds or sit at an angle. The EPAuto kit includes a 5 inch extension bar and a 45-degree elbow for caps under shrouds or at an angle. The KongNai set includes a large flexible long funnel with a long hose that the maker says solves the problem of the spout not reaching the oil tank, plus a handle on the side to steady it one-handed. The Cartisen is 11.3 inches long with a 4.3 inch top opening and a 0.5 inch bottom opening, angled spouts and raised sides to reduce dust entry and leaks. The WirthCo is 8.5 inches tall with a 6.5 inch top diameter and a 2-1/4 inch spout. Measure the filler before you buy: a funnel that cannot reach is a funnel that spills.
Sets vs singles
The KongNai set includes 1 large flexible long funnel and 4 regular plastic funnels; note its spec table lists package quantity 10 and 4 items against the 5-count title, and the title and bullets win. Five funnels mean one for oil, one for coolant, one for fuel, and spares when one is dirty. The other three are singles: the WirthCo, the EPAuto kit and the Cartisen 1-pack. A single good funnel beats a set of flimsy ones, but a set keeps fluids separate, which matters when coolant and oil must never meet.
Material: HDPE vs plain plastic
Only two listings name their plastic. The WirthCo states premium grade HDPE with excellent chemical and corrosion resistance, which is the right material for a funnel that sees oil, fuel and grease. The Cartisen states high-quality plastic that is waterproof, impact-resistant and flexible, reusable and not easily broken or deformed. The EPAuto and KongNai listings state plastic without a grade. For a funnel that lives in a garage and meets petroleum products, a stated HDPE body is the strongest material claim here.
Spout size vs filler neck
The spout has to fit the filler it pours into. The WirthCo states a 1-1/16 inch spout outside diameter with a 2-1/4 inch spout length. The Cartisen states a 0.5 inch bottom opening. The EPAuto and KongNai listings state no spout diameter. Before buying, measure the filler neck on your engine or radiator: a spout wider than the neck will not seat, and a spout much narrower pours slowly and splashes. The two stated spouts here cover the common range, but the filler decides.
One funnel per fluid
Coolant and oil must never meet, and fuel residue does not belong in an oil fill. That is the practical case for the KongNai 5-pack: dedicate one funnel to oil, one to coolant, one to fuel, and keep spares for when one is dirty. With single funnels like the WirthCo, EPAuto and Cartisen, pick the fluid each one serves and label it. A funnel is cheap; a contaminated system is not.
Garage Fit Check
- Space: the WirthCo hangs on its hang hole; the EPAuto kit stores as a kit with extension and elbow.
- Fluids: keep one funnel per fluid type; the KongNai 5-pack makes that easy.
- Fillers: check the filler neck diameter against the spout: the WirthCo spout is 1-1/16 inches OD, the Cartisen bottom opening is 0.5 inch.
- Before the first pour: confirm the screen is in place and the funnel is clean and dry.
Frequently Asked Questions
Can I use one funnel for oil and coolant?
The listings suggest not mixing: the KongNai 5-pack exists so each fluid gets its own funnel, and the WirthCo and Cartisen are single funnels you would dedicate to one fluid. Residue from one fluid does not belong in another system.
What is the screen for?
Filtration. The WirthCo states a 60 micron screen and the KongNai a removable mesh screen, both for catching foreign objects and debris during oil, gas or coolant changes.
Do I need a special funnel for coolant?
The EPAuto kit is built for it: a spill-proof design that the listing says prevents trapped air, which can cause erratic cooling and heater performance, with a 5 inch extension and 45-degree elbow for hard-to-reach caps.
How do I pour without spilling?
Match the spout to the filler, use the handle or hose to steady the funnel, and pour at the funnel’s pace. The KongNai wide mouth and the Cartisen raised sides both aim at spill-free pouring per their listings.
Plastic or metal funnel?
All four listings here are plastic: the WirthCo states premium grade HDPE with chemical and corrosion resistance, and the Cartisen states waterproof, impact-resistant flexible plastic. None of these listings offers a metal funnel. For garage fluids, plastic has the practical edge anyway: it will not scratch a filler neck and it rinses clean.
Related: best oil change kit for beginners, best oil change kit for home mechanics, oil extractor vs drain pan, and the engine and shop equipment hub. Also see our best oil drain pan under 40. Also see our best creeper for oil changes.
