Best Paint Gun for Primer (2026): 5 HVLP Guns by Nozzle Size
Five HVLP gravity feed paint guns for primer compared by nozzle sizes, cup capacity, working pressure, air consumption and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallZeinlenx HVLP Kit9.6/10View on Amazon - 2
Widest Nozzle RangeKCNKCN HVLP Kit9.6/10View on Amazon - 3
Best for High-Build PrimerBENTOHKLE HVLP Kit9.5/10View on Amazon - 4
Best with GaugeENDOZER HVLP Set9.5/10View on Amazon
A fender in bare metal and a can of primer on the bench is a job that lives or dies on the gun: primer is thicker than color, so the best paint gun for primer is the one whose nozzle sizes and air figures match the material in the cup. We compared five HVLP gravity feed guns by stated nozzle sizes, cup capacity, working pressure, air consumption and warranty, using only what each maker publishes.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Zeinlenx HVLP Kit: Four nozzle sizes to 2.5mm, 1000cc cup and a 1 year warranty stated. Check price on Amazon
- Widest Nozzle Range KCNKCN HVLP Kit: Five nozzle sizes to 3.0mm with stated pressure and air consumption. Check price on Amazon
- Best for High-Build Primer BENTOHKLE HVLP Kit: Listed for extreme high build and polyester primers, regulator included. Check price on Amazon
- Best with Gauge ENDOZER HVLP Set: Three nozzle sizes with an air pressure gauge and quick adapter set. Check price on Amazon
Picks for the garage

Zeinlenx HVLP Gravity Feed Spray Gun Kit
An HVLP gravity feed kit with four nozzle sizes and a 1000cc aluminum cup, listed for primer, base coat and clear coat.
Pros
- Four nozzle sizes: 1.4, 1.7, 2.0 and 2.5mm
- 1000cc aluminum cup for longer spray sessions
- Brass air cap with stainless steel needle and nozzle
- 1 year warranty stated
Cons
- Needs an air compressor to run
- Pre-installed nozzle may need effort to remove, per the maker
- No regulator or gauge stated in the kit
- No air consumption figure stated

KCNKCN HVLP Air Spray Gun
An HVLP kit with five nozzle sizes up to 3.0mm, a 1000cc cup and a 2-in-1 regulator, with stated pressure and air consumption.
Pros
- Five nozzle sizes from 1.4 to 3.0mm
- Working pressure stated at 2.5-3.5 bar
- Air consumption stated at 275 L/min
- 2-in-1 regulator with filter included
Cons
- No warranty term stated
- Nozzle swaps also need the matching needle changed
- Largest nozzle set here means more parts to keep track of
- Lifetime support is stated, but no warranty term

BENTOHKLE HVLP Gravity Feed Spray Gun with 4
An HVLP gravity feed kit with four nozzle sizes and a 1000cc cup, listed for high-build and polyester primers.
Pros
- Four nozzle sizes: 1.4, 1.7, 2.0 and 2.5mm
- Listed for extreme high build and polyester primers
- Air regulator and quick connector included
- Air consumption stated at 4.2-7.1 cubic feet per minute
Cons
- Warranty is only 30 days
- Rated pressure range starts at 2.0 bar
- No gauge stated in the kit
- Nozzle swaps need the wrench from the package

ENDOZER Professional HVLP Spray Gun Set Gravity
An HVLP gravity feed set with three nozzle sizes, a 600cc cup and an air pressure gauge, listed for primer and top coats.
Pros
- Three nozzle sizes: 1.3, 1.5 and 1.8mm
- Air pressure gauge and quick adapter set included
- Stainless steel nozzle and needle with brass hood
- Fluid, pattern and air controls stated
Cons
- No warranty term stated
- Not for latex paint, per the maker
- 600cc cup is smaller than the 1000cc cups here
- Largest nozzle is 1.8mm, smaller than the 2.5mm kits

TCP Global Professional HVLP Spray Gun 1.8mm
A single-tip HVLP gravity feed gun with a 1.8mm fluid tip and a 1-liter aluminum cup, listed for primer and basecoat.
Pros
- 1.8mm fluid tip listed for primer and single stage materials
- Large 1-liter aluminum cup
- Air compressor regulator included in the kit
- Pattern, fluid and air adjustment knobs stated
Cons
- Only one nozzle size, 1.8mm
- No warranty term stated
- No air consumption figure stated
- Heaviest here at 4.0 pounds
Compared on paper
| Model | Shop Score | Nozzles | Cup | Pressure | Warranty |
|---|---|---|---|---|---|
| Zeinlenx HVLP Kit | 9.6/10 | 1.4, 1.7, 2.0, 2.5mm | 1000cc | Not stated | 1 year |
| KCNKCN HVLP Kit | 9.6/10 | 1.4, 1.7, 2.0, 2.5, 3.0mm | 1000cc | 2.5-3.5 bar | Not stated |
| BENTOHKLE HVLP Kit | 9.5/10 | 1.4, 1.7, 2.0, 2.5mm | 1000cc | 2.0-3.5 bar | 30 days |
| ENDOZER HVLP Set | 9.5/10 | 1.3, 1.5, 1.8mm | 600cc | Not stated | Not stated |
| TCP Global G6600 | 9.4/10 | 1.8mm | 1 liter | Not stated | Not stated |
We copy each listing’s rated specs exactly as the manufacturer gives them; as of 19 November 2026.
How the points were given
Each gun is scored on performance, build, value, safety and warranty from what the maker states. For a spray gun, performance means the nozzle range and stated air figures, and safety points need a stated safety feature; none of the five states one, so safety scores stay at zero. Two of the five state a warranty term. How we pick.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Zeinlenx HVLP Kit | 9.6 | 28 | 19 | 20 | n/a | 3 |
| KCNKCN HVLP Kit | 9.6 | 30 | 20 | 21 | n/a | 0 |
| BENTOHKLE HVLP Kit | 9.5 | 28 | 19 | 20 | n/a | 1 |
| ENDOZER HVLP Set | 9.5 | 27 | 19 | 19 | n/a | 0 |
| TCP Global G6600 | 9.4 | 26 | 19 | 18 | n/a | 0 |
The displayed number is the weighted point total scaled linearly between 9.2 and 9.8. Earning more points is the only way up. Where a tool neither runs on power nor lists a safety feature, safety shows n/a and the other 90 points decide.
What the listings tell you
Nozzle count is the clearest split. The KCNKCN includes five sizes from 1.4 to 3.0mm, the Zeinlenx and BENTOHKLE include four from 1.4 to 2.5mm, the ENDOZER includes three from 1.3 to 1.8mm, and the TCP Global is a single 1.8mm tip. Cup capacity splits the same way: 1000cc on the Zeinlenx, KCNKCN and BENTOHKLE, 1 liter on the TCP Global, and 600cc on the ENDOZER.
Buying guide: the best paint gun for primer
Nozzle size for primer
Primer needs a larger fluid tip than basecoat because the material is thicker. The BENTOHKLE maker lists its 2.0 and 2.5mm nozzles for high viscosity coatings such as extreme high build or polyester primers, and the KCNKCN goes to 3.0mm. A single 1.8mm tip, as on the TCP Global, covers standard primer and single stage materials per its maker, but leaves no larger option for thick high-build coats.
Air pressure and consumption
Your compressor has to keep up with the gun. The KCNKCN states working air pressure of 2.5-3.5 bar and air consumption of 275 L/min. The BENTOHKLE states a rated pressure of 2.0-3.5 bar and air consumption of 4.2-7.1 cubic feet per minute. The other three state no air consumption figure, so check your compressor output against the figures you do have before ordering.
Cup size and refills
A 1000cc cup covers more panel between refills than a 600cc cup. The Zeinlenx, KCNKCN and BENTOHKLE state 1000cc aluminum cups, the TCP Global states a 1-liter aluminum cup, and the ENDOZER states a 20 oz (600 ml) cup. For primer on a full panel, the bigger cup means fewer stops mid-coat.
Controls and kit contents
All five state pattern, fluid and air adjustment. The KCNKCN and BENTOHKLE include an air regulator, the ENDOZER includes an air pressure gauge and quick adapter set, and the TCP Global kit includes an air compressor regulator. Filters and cleaning brushes are stated on the KCNKCN and BENTOHKLE kits.
Wear eye protection with every air tool, use impact-rated sockets on impact wrenches, disconnect the air line before changing accessories, and finish lug nuts with a torque wrench to the vehicle's spec. See OSHA eye and face protection. Read our Safety Disclaimer.
Garage Fit Check
- Check your compressor against the stated air figures: 275 L/min on the KCNKCN, 4.2-7.1 cubic feet per minute on the BENTOHKLE.
- Match the inlet: 1/4 inch NPT is stated on the ENDOZER and the KCNKCN regulator.
- Keep the spare nozzles and matching needles together; the KCNKCN maker states nozzle swaps need the corresponding needle.
- Store the gun with its filter and brushes so cleaning after primer stays quick.
FAQ: garage tools
What nozzle size do I need for primer?
The makers here list larger tips for thicker material: the BENTOHKLE lists 2.0 and 2.5mm nozzles for high viscosity coatings such as extreme high build or polyester primers, and the KCNKCN includes sizes up to 3.0mm. The TCP Global lists its single 1.8mm tip for primer and single stage materials.
Do these guns need an air compressor?
Yes. The Zeinlenx maker states the gun needs to be connected to an air compressor, and the TCP Global kit includes an air compressor regulator. Stated air figures are 275 L/min on the KCNKCN and 4.2-7.1 cubic feet per minute on the BENTOHKLE.
Can I spray latex paint with these guns?
The ENDOZER maker states its gun is not for latex paint. The BENTOHKLE maker lists latex paints among the high viscosity coatings for its nozzle set. Check the maker statement for the exact gun before you spray.
Do any of these paint guns state a warranty?
The Zeinlenx states a 1 year warranty and the BENTOHKLE states 30 days. The KCNKCN, ENDOZER and TCP Global state no warranty term, though the KCNKCN states lifetime support.
More garage guides
Also see our best paint gun for automotive. Also see our best paint gun for beginners. Also see our how to clean a paint gun. Also see our best paint gun with regulator.
Back to all air tools.




