Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Clean Paint Gun: Flush, Brush and Clear the Passages

A clean spray gun starts with an empty cup, a flush with cleaner, and a brush through the nozzle and the passages, and the three kits in this guide cover the brushing and clearing.

How to Clean Paint Gun: Flush, Brush and Clear the Passages
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Spray Gun Cleaning Kit, Airbrush Cleaning KitSpray Gun Cleaning Kit, Airbrush Cleaning Kit9.7/10View on Amazon
  2. 2QWORK 17pcs Spray Gun Cleaning KitQWORK 17pcs Spray Gun Cleaning Kit9.6/10View on Amazon
  3. 3Multi-Purpose Spray Tool Cleaning Kit with SprayMulti-Purpose Spray Tool Cleaning Kit with Spray9.6/10View on Amazon

A spray gun that sputters after a paint job usually has dried paint left in the cup, the passages or the nozzle. How to clean paint gun work comes down to emptying the cup, flushing the gun with cleaner, brushing the nozzle and the small passages, and letting the parts dry before the gun goes back on the shelf. The kits below cover the brushing and clearing part of that job.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: the steps for cleaning a paint gun from cup to nozzle, what each cleaning kit covers, and the answers to the questions that come up most.

Spray Gun Cleaning Kit, Airbrush Cleaning Kit

Spray Gun Cleaning Kit, Airbrush Cleaning Kit

TOAINRSI9.7/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An all-in-one spray gun cleaning kit with changeable end brushes, an extension rod, ultra-fine needles, a 500ml wash bottle, a curved pick and a storage case.

Pros

  • Three bristle types: soft nylon, brass wire and stainless steel
  • 500ml wash bottle and curved pick tool included
  • Extension rod reaches deep inside narrow tubes and hidden passages
  • Covers daily maintenance and deep cleaning with no extra tools required

Cons

  • No warranty term is stated
  • Steel bristles can scratch delicate parts when matched to the wrong task
  • Nylon bristles suit delicate parts, not heavy-duty buildup
  • Wash bottle holds 500ml, with no spare bottle for another cleaner
QWORK 17pcs Spray Gun Cleaning Kit

QWORK 17pcs Spray Gun Cleaning Kit

QWORK9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 17-piece spray gun cleaning kit with nylon brushes and 10 micro needle picks for HVLP, suction, gravity-fed and airless guns.

Pros

  • 17 pieces, with 10 micro needle picks
  • Reinforced nylon bristles reach narrow crevices without damaging sensitive parts
  • Fits HVLP, suction, gravity-fed and airless guns
  • Micro needle picks and mini brushes unclog fine openings and thin tubes

Cons

  • No wash bottle is included
  • No storage case is included
  • Nylon bristles only, with no brass or steel option for heavy buildup
  • 13.38 in long, so it needs a long spot on the shelf
Multi-Purpose Spray Tool Cleaning Kit with Spray

Multi-Purpose Spray Tool Cleaning Kit with Spray

AOIUBTSM9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A multi-purpose spray tool cleaning kit with spray bottles, brushes of various sizes and precision tools for HVLP gravity, suction and detail guns.

Pros

  • Multiple graduated bottles for cleaning solutions and solvents
  • Fits HVLP gravity feed guns, suction feed spray guns and detail airbrushes
  • Precision brushes reach tight spaces and delicate components
  • Brushes of various sizes for thorough maintenance

Cons

  • No warranty term is stated
  • No needle picks for fine nozzles and thin tubes
  • No storage case; the bottles and brushes need their own storage
  • No pick tool for stubborn buildup

How to Clean Paint Gun, Step by Step

Work through the steps in order, and lay the small parts out as they come off the gun so they go back in the same places.

  1. Empty the cup. Pour out the paint that is left and wipe the cup clean.
  2. Flush the gun. Fill the cup with cleaner, spray it through the gun into a waste container until the spray runs clear, then empty the cup again.
  3. Take the gun apart as far as the manual allows. Remove the nozzle, the needle and the cup, and lay the small parts out in order.
  4. Clear the nozzle and the passages. Push a fine needle through a clogged nozzle tip, then run a brush through each passage until the bristles come out clean.
  5. Brush the cup and the body. Work the brushes into the corners where paint collects, and rinse the parts with fresh cleaner.
  6. Dry and put the gun back together. Let the parts dry fully, then reassemble the gun and store it with the cup off.
Cleaner fumes need fresh air

Clean in fresh air, keep cleaner away from flame, and wear gloves and eye protection. Never spray cleaner toward anyone, and keep the waste container covered.

What the Three Cleaning Kits Cover

The three kits below differ in what they hold: needles and picks, a wash bottle, or graduated bottles for cleaner. Match the kit to the gun and to the steps above.

Kit Pieces Needles and picks Bottles Case
TOAINRSI Cleaning Kit Not stated Ultra-fine needles, curved pick 500ml wash bottle Storage case
QWORK 17-Piece Kit 17 pieces 10 micro needle picks Not stated Not stated
AOIUBTSM Cleaning Kit Not stated Not stated Multiple graduated bottles Not stated

Matching the Kit to the Gun

Start with the gun type. The AOIUBTSM kit (on Amazon) lists HVLP gravity feed guns, suction feed spray guns and detail airbrushes, and the QWORK kit lists HVLP, suction, gravity-fed and airless guns. The TOAINRSI kit (on Amazon) lists most airbrushes and small precision parts, and it also suits carburetors. Pick the kit that names the gun, then check the brush sizes against the nozzle and the passages.

The Cleaning Kits for This Job

The brushing and clearing steps above need the kit brushes and needles: the three kits below cover those steps for HVLP, airbrush and gravity-fed guns.

Air tool safety

Wear eye protection with every air tool, use impact-rated sockets on impact wrenches, disconnect the air line before changing accessories, and finish lug nuts with a torque wrench to the vehicle's spec. See OSHA eye and face protection. Read our Safety Disclaimer.

FAQ: garage tools

How often should I clean a paint gun?

Clean the gun after every use, before paint dries in the passages. A gun that sits with paint in it needs a deeper clean, and dried paint in the nozzle is harder to clear than fresh paint.

Can I clean a paint gun with water?

Water alone suits water-based paint. For other paints, use the cleaning solution or solvent the paint calls for, and follow the gun manual for what can go through the gun.

What do the needles in a cleaning kit clear?

The fine needles clear clogs in the nozzle tip and the thin passages where paint collects. The TOAINRSI kit lists ultra-fine stainless steel needles for fine nozzles, and the QWORK kit lists 10 micro needle picks for fine openings and thin tubes.

Do I need a different kit for an HVLP gun?

Two of the kits here name HVLP guns: the AOIUBTSM kit lists HVLP gravity feed guns, suction feed spray guns and detail airbrushes, and the QWORK kit lists HVLP, suction, gravity-fed and airless guns. Check the gun type against the kit before ordering.

What if paint has dried in the gun?

Dried paint needs a deeper clean: soak the parts in cleaner, then work the brushes and needles through the passages until they run clear. The TOAINRSI kit lists brass wire bristles for stubborn residue and stainless steel bristles for heavy-duty buildup.

Related: how to use a paint gun, best paint gun cleaning kit, paint gun vs airbrush and the air tools hub.

More buying guides

Air Tools ·

Best Paint Gun for Beginners (2026)

Four paint guns for beginners compared by tip size, cup size, controls and power, from a gravity-feed HVLP gun to a cordless electric sprayer.