Best Plastic Welder for Dent Repair (2026)

A parking-lot tap leaves a crack across the bumper, and a new bumper costs far more than the plastic it is made of. A plastic welder melts a staple across the crack and rebuilds the break from inside, so the bumper holds again without a replacement part. The best plastic welder for dent repair heats fast, holds staples in a range of shapes and comes with the rods and tools the job needs.

This roundup compares 4 plastic welder kits on Amazon, from 150W to 220W, on power, heat-up, staples, rods and kit contents. Listings were collected 12 November 2026; check the listing before you buy, since details change.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	220w Plastic Welder,Upgraded 2 in 1 Plastic	9.5/10	Buy on Amazon
2	Plastic Welder Machine for Auto Bumper Repair	9.5/10	Buy on Amazon
3	150W Upgraded Plastic Welder Kit,1000PCS Hot	9.4/10	Buy on Amazon
4	OIMERRY Plastic Welder Repair Machine Kit	9.4/10	Buy on Amazon

1

220w Plastic Welder,Upgraded 2 in 1 Plastic

Miotorio·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 220W 2-in-1 plastic welder with 1000 staples and 92 rods, heating in 1 to 3 seconds, with mesh sheets, aluminum sheets and a suitcase.

Check price on Amazon

Pros

• 220W, the most here
• Heats in 1 to 3 seconds stated
• 1000 staples and 92 rods
• 9 rod materials listed

Cons

• No warranty stated
• No safety listing stated
• No smoothing head stated
• No LED light stated

2

Plastic Welder Machine for Auto Bumper Repair

ZJPHANER·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A plastic welder with a pure copper transformer, a 600°C max temperature and 6 nail types, with 1000 staples, an LED light and a portable toolbox.

Check price on Amazon

Pros

• 600°C max temperature stated
• Heats to 400°C in 3 to 5 seconds
• 6 nail types included
• 1000 staples stated

Cons

• No wattage stated
• No warranty stated
• No safety listing stated
• No rods stated

3

150W Upgraded Plastic Welder Kit,1000PCS Hot

Ghguole·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 150W 2-in-1 plastic welder with 1000 staples in 6 types, 8 welding rods, 2 smoothing heads, LED indicators and overheating protection.

Check price on Amazon

Pros

• 1000 staples in 6 types
• Overheating protection stated
• 2 smoothing heads included
• Carrying case included

Cons

• Instructions may be for an old version
• No warranty stated
• No safety listing stated
• 8 rods only, fewer than the Miotorio

4

OIMERRY Plastic Welder Repair Machine Kit

OIMERRY·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-level adjustable plastic welder with an LED screen showing the power level, 110V power, a long handle with light and 800 staples in a toolbox.

Check price on Amazon

Pros

• 5 power levels on an LED screen
• 110V with a longer power cord
• Triangular tip for smoothing
• Toolbox included

Cons

• No wattage stated
• 800 staples, fewer than the 1000 in the other kits
• No warranty stated
• No safety listing stated

Compared on paper

Specs such as CFM, PSI and torque are the manufacturer’s ratings as listed, collected 12 November 2026. Where a listing contradicts itself, both figures are shown.

How the points were given

Each welder is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a UL, ETL or CSA listing, so all score zero on safety, and none states a warranty term.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.

What the listings tell you

We read 4 plastic welder listings. 3 state 1000 staples, 1 states 800, and 2 state a wattage. One states a 600°C max temperature, and none states a warranty term or a safety listing.

Buying guide: the best plastic welder for dent repair

Power (watts)

Power decides how fast the gun heats. The picks here state 150W or 220W, and the 220W Miotorio states heating in 1 to 3 seconds. 2 of the picks state no wattage at all, so compare them on temperature: the ZJPHANER states a 600°C max, heating to 400°C in 3 to 5 seconds.

Staples and rods

Staples bridge the crack and rods fill it. 3 of the picks include 1000 staples in 6 types, while the OIMERRY includes 800. Rods run from 8 to 92 pieces, and the Miotorio lists 9 rod materials, from ABS to TPO.

Heat-up and temperature

Heat-up runs from 1 to 3 seconds on the Miotorio to 3 to 5 seconds to 400°C on the ZJPHANER. The OIMERRY trades raw heat for control, with 5 power levels on an LED screen. A level display helps when a lower heat suits thin plastic, since the OIMERRY listing warns that excess heat can penetrate the plastic.

Kit contents

Count what comes in the box. The Ghguole kit adds a carrying case, pliers and a utility knife, while the Miotorio adds a spatula, mesh sheets and aluminum sheets. The OIMERRY packs its kit in a toolbox, and the ZJPHANER in a portable toolbox.

Safety and power supply

None of the picks states a UL, ETL or CSA listing. The Ghguole states overheating protection, and the OIMERRY states 110V with a longer power cord. Check the listing for the power supply before you buy.

Garage Fit Check

• Power: the OIMERRY states 110V, so check the outlet near the bench before you buy.
• Bench space: the kits pack a gun, staples, rods and a case or toolbox, so clear a bench for the kit and the bumper.
• Staples: 3 of the picks include 1000 staples in 6 types, so check the shapes match the cracks you plan to fix.
• Ventilation: welding melts plastic, so work where air moves and keep the hot tip away from trim.

FAQ: garage tools

How does a plastic welder fix a cracked bumper?

A plastic welder heats a metal staple and melts it across the crack, bridging the break from inside the plastic. Rods then fill the gap, and a smoothing head flattens the repair. The picks here use staples in 6 types, with V-shaped nails for inner corners and M-type nails for outer corners.

What wattage plastic welder do I need?

The picks here state 150W or 220W. The 220W Miotorio states heating in 1 to 3 seconds, while the 150W Ghguole states fast heating without waiting. 2 of the picks state no wattage, so compare them on stated temperature instead.

Can a plastic welder fix a kayak?

Yes, kayak repair is a stated use: the Ghguole listing names bumpers, kayaks and plastic products, and the Miotorio names canoes and kayaks. The OIMERRY names automotives, motorcycles, ATVs and boats, and the ZJPHANER names automotive parts plus household plastic items. Check the listing for the plastic type before you weld.

Do these kits include welding rods?

2 of the picks include rods: the Ghguole includes 8 welding rods, and the Miotorio includes 92 rods in 9 materials. The ZJPHANER and OIMERRY state staples but no rods, so check the listing if rods matter for the job.

Related: the best plastic welder kit, the best heavy duty plastic welder, plastic welder for bumper repair, the bumper repair kit and our air tools hub. Also see our best cordless plastic welder. Also see our plastic welder vs plastic bonder. Also see our best suction cup dent puller. Also see our best dent puller kit for metal.