Plastic Welder for Bumper Repair: Choosing a Kit (2026)
Hot stapler and welding rod kits for bumper repair, compared by power, staples, rods, heat limits and the tools each kit includes.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Plastic Welder Machine for Auto Bumper Repair with PureView on Amazon - 2
Allturn Plastic Welder 2 in 1 with the M8 Hot Cutting TipView on Amazon - 3
ARCCAPTAIN 130A Flux Core Welder MIG Welder 110V Gasless MIGView on Amazon - 4
S7 200A TIG WelderView on Amazon - 5
Futelo 160A MIG WelderView on Amazon - 6
SSimder 140A MIG Welder 3 in 1View on Amazon
A cracked bumper does not always need a new bumper. A plastic welder for bumper repair melts a staple or a rod into the crack so the plastic holds together again, and the right kit depends on the crack and the plastic. This guide explains the methods, the figures the listings state, and the kits.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: methods, power and heat limits, and the gear.
Upgraded 220W Plastic Welder
A 220W 2-in-1 welder with 1000 hot staples and 100 plastic rods for bumper repair.
Pros
- 220W rapid heating with a 110V-US plug
- 1000 hot staples in 6 types, with 0.6 mm and 0.8 mm wire
- 100 plastic rods for ABS, PP, PE, TPE, PC, PUR, PA, LDPE and TPO
- Overheat protection device and LED headlamps
Cons
- No warranty term stated in the listing
- Title says 1000PCS staples while the package list says 1002PCS
- Listing claims 12 types of rods but names ABS, PP, PE, TPE, PC, PUR, PA, LDPE and TPO
- No staple temperature stated in the listing
SEESII Plastic Welder 2 in 1 with Soldering Iron
A 150W hot stapler with a 60W soldering iron, 200 staples and 20 rods.
Pros
- 150W gun plus a 60W soldering iron in one kit
- Heats staples to 600°C in 3 seconds
- 2 Year Manufacturer warranty
- Welder 500g and soldering iron 195g, with soft-grip handles
Cons
- No safety feature stated in the listing
- No voltage stated in the listing
- 200 staples, the fewest of the kits here, and 20 rods
- No staple wire size stated in the listing
Allturn Plastic Welder 2 in 1 with the M8 Hot
A 110V-100W welder with 38 rods, 800 staples and a UL certified power cord.
Pros
- UL certified power cord with internal overheating protection
- 800 staples in 4 types and 38 multi-type rods
- Staples reach a maximum temperature of 1380°F in 1-2 seconds
- M8 cutting tip and 2 M6 smoothing tips
Cons
- No warranty term stated in the listing
- 100W, the lowest stated power in this guide
- M6 and M8 tips run for no more than 5 minutes at a time
- No staple wire size stated in the listing
Wrdlosy Plastic Welder Kit, 1200PCS Staples
A 1200-staple kit with a built-in LED for PP, ABS and PLA bumpers and fenders.
Pros
- 1200 staples: 500 wave, 300 flat, 200 outside corner and 200 inside corner
- Heats in 1-2 seconds with stainless steel staples that resist rust
- Built-in LED for hairline cracks
- Staple cutter and carry case in the kit
Cons
- No warranty term stated in the listing
- No wattage stated in the listing
- No safety feature stated in the listing
- Staples fit Wrdlosy holders only; not recommended for nylon or TPO
Other tools worth a look
Plastic Welder Machine for Auto Bumper Repair with PureCheck price on Amazon
Allturn Plastic Welder 2 in 1 with the M8 Hot Cutting TipCheck price on Amazon
ARCCAPTAIN 130A Flux Core Welder MIG Welder 110V Gasless MIGCheck price on Amazon
S7 200A TIG WelderCheck price on Amazon
Futelo 160A MIG WelderCheck price on Amazon
SSimder 140A MIG Welder 3 in 1Check price on Amazon
Plastic welder for bumper repair at a glance
| Method | How it works | What it handles |
|---|---|---|
| Hot staples | A hot staple melts into the crack from inside and bridges it | Cracked bumpers, fenders, dashboards, lamp holders |
| Welding rods | A rod melts into the joint and a smoothing tip levels it | Surface cracks and holes on bumpers |
| 2-in-1 kit | Staples inside, rods on the surface, in one kit | Bumper cracks needing strength and a flat finish |
How hot staples hold a crack
Hot staples are the strength step. The gun heats a staple and presses it into the plastic across the crack. The VCTSELITY kit holds 1000 staples in 6 types, with 0.6 mm and 0.8 mm wire, and the WRDLOSY kit holds 1200 staples in 4 types: 500 wave, 300 flat, 200 outside corner and 200 inside corner. The Allturn kit holds 800 staples in 4 types: 200 flat, 200 wavy, 200 M-type and 200 V-type. The Seesii kit holds 200 staples in 4 types: V, W, Large Wave and Small Wave.
Welding rods and the smoothing iron
Welding rods are the surface step. The iron melts a rod into the joint, fills the gap, and a smoothing tip levels the surface for sanding. The VCTSELITY kit holds 100 rods for ABS, PP, PE, TPE, PC, PUR, PA, LDPE and TPO, with a patch net and 2 iron smoothing tips. The Seesii kit pairs a 60W soldering iron with 20 rods: the iron melts the rods, erases surface scars, patches holes, and leaves a flat surface ready for sanding. The Allturn kit holds 38 multi-type rods and 2 hot smoothing tips, with an M8 hot cutting tip for trimming. Match the rod to the plastic: the WRDLOSY listing covers PP, ABS and PLA, and states its kit is not recommended for nylon or TPO.
Power, heat and staple sizes
Power sets how fast the gun heats. The VCTSELITY gun runs at 220W, the Seesii gun at 150W with a 60W soldering iron, and the Allturn gun at 100W. The WRDLOSY listing states no wattage. Heat limits differ too: Allturn staples run to a maximum of 1380°F in 1-2 seconds, the smoothing head to a maximum of 900°F in 5 seconds, and Seesii staples to 600°C in 3 seconds. Staple wire runs 0.6 mm and 0.8 mm in the VCTSELITY kit, and the WRDLOSY staples use a 0.03-inch crown width. The VCTSELITY, Allturn and WRDLOSY kits list a 110V plug.
Use limits in the listings
2 limits in the listings deserve attention. The Allturn M6 hot smoothing tip and M8 hot cutting tip are auxiliary repair accessories only: run them for no more than 5 minutes at a time, then allow the tool to cool down before resuming. The WRDLOSY staples fit Wrdlosy brand holders only.
Work with fresh air moving through the garage, and wear gloves when wiping the brass holder while warm. Let the M6 and M8 tips cool down before resuming, and never run them for more than 5 minutes at a time.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
The gear: kits for bumper repair
Once the crack, the plastic type and the staple size are known, the kits below cover the repair: staples for strength, and rods for the surface on the kits that include them.
FAQ: garage tools
Will a plastic welder fix a cracked bumper?
Yes, on the plastics these kits cover. Hot staples bridge the crack from inside, and welding rods fill and smooth the surface. Practice on scrap first: the WRDLOSY listing recommends it for best results.
What plastics can these kits repair?
The VCTSELITY rods cover ABS, PP, PE, TPE, PC, PUR, PA, LDPE and TPO. The WRDLOSY listing covers PP, ABS and PLA, and states its kit is not recommended for nylon or TPO. The Allturn listing states it can repair all thermoplastics on the market, such as car bumpers, garbage cans, water tanks and dashboards.
How hot do the staples get?
The Allturn staples run to a maximum temperature of 1380°F in 1-2 seconds. The Seesii kit heats staples to 600°C in 3 seconds. The Allturn smoothing head runs to a maximum temperature of 900°F in 5 seconds.
How long can I run the Allturn M6 and M8 tips?
No more than 5 minutes at a time. The Allturn listing states the M6 hot smoothing tip and the M8 hot cutting tip are auxiliary repair accessories only, and to allow the tool to cool down before resuming.
What comes in the kits?
The VCTSELITY kit holds 1000 staples and 100 rods, with mesh, foil, sponges, a plier and smoothing tips. The Allturn kit holds 800 staples and 38 rods, with a knife and tips in a black tool bag. The WRDLOSY kit holds 1200 staples with a staple cutter and a carry case. The Seesii kit holds 200 staples and 20 rods.
Related: best plastic welder kit, best plastic stapler welder and the bumper repair kit. Also see our best primer for automotive plastic. Also see our best black plastic scratch remover. Also see our best cordless soldering iron kit with case. Also see our car detailing hub. Also see our engine and shop equipment hub. Also see our garage upgrades hub.
