Best Sandpaper for Fiberglass (2026): 5 Picks Compared

A fiberglass panel with a rough repair edge needs a steady hand and the right abrasive before paint goes on. Coarse grit shapes the repair, finer grit levels the surface, and an ultra-fine finish leaves paint ready to shine. The best sandpaper for fiberglass is a wet-or-dry sheet or sponge that covers that whole range without falling apart when wet.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Dura-Gold 50 Sheet Assorted 3-2/3" x 9" Wet or Dry	9.7/10	Buy on Amazon
2	BMOTL Wet Dry Sandpaper Sheets 9x3.6	9.6/10	Buy on Amazon
3	45 PCS Wet Dry Sandpaper 80-5000 Grit Sheets	9.6/10	Buy on Amazon
4	24 PCS Sanding Sponge Block 80-3000 Grit Wet Dry	9.5/10	Buy on Amazon
5	Shineboc Sandpaper Assortment	9.5/10	Buy on Amazon

1

Dura-Gold 50 Sheet Assorted 3-2/3" x 9" Wet or Dry

Dura-Gold·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50-sheet wet-or-dry assortment in 10 grits from 150 to 3000, with silicon carbide abrasive and fiberglass named among its uses.

Check price on Amazon

Pros

• Fiberglass named among the listed uses
• 10 grits from 150 to 3000, 5 sheets each
• Silicon carbide, electro-coated for even grit
• Suits blocks, jitterbug sanders and orbital sanders

Cons

• No warranty term stated
• Coarsest grit is 150, above the 80 grit in other packs here
• Sheet size 3-2/3 x 9 inch differs from the 9 x 3.6 inch sheets here
• Sheets only; no sponge block form

2

BMOTL Wet Dry Sandpaper Sheets 9x3.6

BMOTL·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 42-sheet wet-or-dry assortment in 14 grits from 120 to 5000, with silicon carbide on tear-resistant latex paper and stage-by-stage grit guidance.

Check price on Amazon

Pros

• Grit guidance by stage, from 120 to 5000 grit
• Silicon carbide on tear-resistant latex paper
• Wet or dry use for auto bodies, glass, wood, drywall and metal
• 3 sheets of each grit in the pack

Cons

• Fiberglass not named in the listing
• No warranty term stated
• Sheet size 9 x 3.6 inch only; no sponge form
• No grit marking on the back stated

3

45 PCS Wet Dry Sandpaper 80-5000 Grit Sheets

Pihemum·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 45-sheet wet-or-dry assortment in 15 grits from 80 to 5000, with electro-coated silicon carbide and grit numbers printed on the back.

Check price on Amazon

Pros

• 15 grits from 80 to 5000
• Electro-coated silicon carbide with a tear-resistant build
• Grit numbers printed on the back
• Sheets can be trimmed to any size

Cons

• Fiberglass not named in the listing
• No warranty term stated
• No sponge form for curved surfaces
• No stage-by-stage grit guidance stated

4

24 PCS Sanding Sponge Block 80-3000 Grit Wet Dry

Pukamam·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A set of 24 foam sponge sanding blocks in grits from 80 to 3000, washable and reusable, with flexible foam for curved and uneven surfaces.

Check price on Amazon

Pros

• Foam adapts to curves and tight corners
• Washable and reusable blocks
• 24 blocks in grits from 80 to 3000
• Sponge layer absorbs vibration and aids grip

Cons

• Fiberglass not named in the listing
• Abrasive material not named as silicon carbide
• No warranty term stated
• Blocks measure 3.93 x 2.75 x 0.19 inch, smaller coverage than full sheets

5

Shineboc Sandpaper Assortment

Shineboc·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 21-sheet wet-or-dry assortment in 7 grits from 120 to 2000, with silicon carbide, a reinforced backing and grit numbers marked on the back.

Check price on Amazon

Pros

• Silicon carbide, electrostatically coated for even grit
• Reinforced backing resists tearing
• Grit number marked on the back
• Sheets can be cut to different sizes

Cons

• Fiberglass not named in the listing
• 21 sheets; fewer sheets than the other packs here
• No warranty term stated
• Top grit 2000; no ultra-fine grits to 3000 or 5000

Compared on paper

Specifications as published on each listing, collected 30 October 2026.

How the points were given

Each pick is scored on performance, build, value, safety and warranty. No listing here states a safety certification or a warranty term, so safety and warranty score zero for every pick. How we pick explains the weights.

The displayed number is the weighted point total scaled linearly between 9.2 and 9.8. Earning more points is the only way up. Only powered tools, or tools with stated safety features, get safety points. Everything else is rated out of 90.

What the listings tell you

Grit numbers run from coarse to ultra-fine: Pihemum from 80 to 5000 grit, BMOTL from 120 to 5000 grit, Dura-Gold from 150 to 3000 grit, Pukamam sponges from 80 to 3000 grit, and Shineboc from 120 to 2000 grit. Lower grits shape and remove material, while higher grits smooth and polish.

Sheet packs measure 9 x 3.6 inch, except Dura-Gold at 3-2/3 x 9 inch, while Pukamam sponges measure 3.93 x 2.75 x 0.19 inch. Every pick states wet-or-dry use; wet sanding reduces dust and scratches, dry sanding removes material faster.

Buying guide: best sandpaper for fiberglass

Start coarse, finish fine

The BMOTL listing gives stage guidance: 120 to 220 grit for heavy removal, 240 to 400 grit between finishes, 600 to 1000 grit before painting, 1200 to 1500 grit between lacquer coats, and 2000 to 5000 grit for a glass-smooth finish before polishing. A pack that stops at 2000 grit, such as Shineboc, covers shaping and smoothing but not the finest polishing stages.

Wet or dry

Wet sanding keeps dust down and helps the sheet resist clogging, and every pick states wet-or-dry use. Dry sanding is quicker for shaping. At finer grits, wet sanding gives a smoother result with fewer visible scratches, as the Dura-Gold and Shineboc listings describe.

Sheets or sponge blocks

Sheets suit flat panels and sanding blocks: Dura-Gold names blocks, jitterbug sanders and orbital sanders, and Shineboc names block, palm and sheet sanders. Sponge blocks suit curved surfaces, since Pukamam foam adapts to curves and tight corners.

Garage Fit Check

• Sheet packs measure 9 x 3.6 inch, except the Dura-Gold sheets at 3-2/3 x 9 inch, so check the fit against the blocks and sanders in the garage.
• Sponge blocks measure 3.93 x 2.75 x 0.19 inch, so check the grip and curve fit before starting on a shaped part.
• Pack counts run from 21 to 50 sheets, plus 24 sponge blocks, so check the count against the panel job.
• Grit numbers are marked on the back of the Shineboc and Pihemum sheets, which helps when sorting grits.

FAQ: garage tools

What is sandpaper made of?

The sheet packs here use silicon carbide abrasive, electro-coated for even grit distribution. The Pukamam sponges state a high-quality abrasive material without naming silicon carbide.

What grit range suits fiberglass finishing?

Coarse grits from 80 to 220 shape and remove material, mid grits from 240 to 1000 smooth between finishes, and fine grits from 1200 to 5000 polish toward a glass-smooth finish, following the BMOTL stage guidance.

Should fiberglass be sanded wet or dry?

Either, since every pick here states wet-or-dry use. Wet sanding reduces dust and scratches at finer grits, while dry sanding removes material faster at coarser grits.

Are sheets or sponge blocks better for curved fiberglass?

Sponge blocks, since Pukamam foam adapts to curves and tight corners. Flat sheets suit flat panels and sanding blocks.

Related: the best DA sander for auto body, the air tools hub and the car detailing hub.