Best Screwdriver Bit Set with Nut Driver Adapter (2026)

A repair that mixes hex bolts and Phillips screws usually means extra trips to the toolbox, and a nut driver that does not fit the bolt head ends the job early. The best screwdriver bit set with nut driver adapter keeps bits, nut drivers and adapters in the same case, so the driver in hand matches the fastener in front of it. This guide compares the sets on piece count, bit steel, nut driver range and case, so you can match a set to the work in your garage.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	232-Piece Ultimate Screwdriver Bit Set	9.7/10	Buy on Amazon
2	RLVKEAZ 88-Piece Impact Driver Bit Set	9.6/10	Buy on Amazon
3	86PCS Magnetic Nut Driver Set 1/4" Metric/SAE	9.6/10	Buy on Amazon
4	WORKPRO 39 PCS Magnetic Nut Driver Set	9.6/10	Buy on Amazon
5	ELEAD 47-Piece Magnetic Nut Driver & Screwdriver	9.5/10	Buy on Amazon

1

232-Piece Ultimate Screwdriver Bit Set

SEDY·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 232-piece Cr-V steel screwdriver bit set with security bits, a nut driver, a ratchet wrench and a bits holder in a labeled case.

Check price on Amazon

Pros

• 232 pieces, the widest coverage here
• Cr-V steel for impact driver and wrench accessories
• Security bits plus a nut driver and ratchet wrench
• Labeled slots in a robust case for organized storage

Cons

• No dimensions stated
• No warranty term stated
• No safety listing stated
• No bit lengths stated

2

RLVKEAZ 88-Piece Impact Driver Bit Set

RLVKEAZ·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 88-piece S2 steel magnetic bit set with 9 bit types, nut drivers, a mini ratchet and bit lengths from 1 to 6 inch.

Check price on Amazon

Pros

• S2 steel bits in 9 types, from Phillips to Triangle
• Metric 1.5 to 8 mm and SAE 5/64 to 5/16 in hex bits
• Bit lengths from 1 to 6 inch for recessed screws
• Mini ratchet, bit holders and nut drivers included

Cons

• No warranty term stated
• No safety listing stated
• No case or box named in the listing
• SAE hex bits stop at 5/16 in

3

86PCS Magnetic Nut Driver Set 1/4" Metric/SAE

Bluebow·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 86-piece Cr-V and S2 steel nut driver set with deep nut drivers, a 200 mm flexible shaft, an angle driver and a carry case.

Check price on Amazon

Pros

• Deep nut drivers in 48, 65 and 80 mm plus a 17 mm socket
• 200 mm flexible shaft and angle driver for tight spots
• Ball-head adapters in 1/4, 3/8 and 1/2 in
• Manganese phosphate coating for corrosion resistance

Cons

• No warranty term stated
• No safety listing stated
• No weight stated
• Listing does not say which pieces are Cr-V and which are S2

4

WORKPRO 39 PCS Magnetic Nut Driver Set

WORKPRO·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 39-piece magnetic nut driver set in Cr-V steel with metric and SAE nut drivers in 38 and 65 mm, 3 S2 screwdriver bits and a tool box.

Check price on Amazon

Pros

• Metric and SAE nut drivers in 38 and 65 mm lengths
• Red for SAE and blue for metric, with laser-etched sizes
• 3 S2 steel screwdriver bits for higher torque
• Rubidium magnet locks bits while tightening or loosening

Cons

• No warranty term stated
• No safety listing stated
• No weight or dimensions stated
• Only 3 screwdriver bits in a 39-piece set

5

ELEAD 47-Piece Magnetic Nut Driver & Screwdriver

ELEAD·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 47-piece magnetic nut driver and screwdriver bit set in Cr-V and S2 steel with 16 nut drivers, a mini ratcheting wrench and a 1/4 in socket fit.

Check price on Amazon

Pros

• 16 nut driver pieces in metric and SAE sizes
• Cr-V bits and S2 drill bits with manganese phosphate coating
• Strong magnetic hold with inlaid magnets
• Engraved sizes for easy identification

Cons

• No warranty term stated
• No safety listing stated
• 2.95 lb, the heaviest stated weight here
• No dimensions stated

Compared on paper

Specs such as CFM, PSI and torque are the manufacturer’s ratings as listed, collected 6 November 2026. Where a listing contradicts itself, both figures are shown.

How the points were given

Each set is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a UL, ETL or CSA listing, so no pick earns safety points, and none of the 5 states a warranty term.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score. Where a tool neither runs on power nor lists a safety feature, safety shows n/a and the other 90 points decide.

What the listings tell you

We read 5 bit set listings. All but 1 of the 5 use Cr-V steel somewhere in the set, while 1 uses S2 steel across its bits. 3 of the 5 include a ratchet wrench, and 2 of those are mini ratchets. Only 1 lists both weight and dimensions, and none states a warranty term or a safety listing.

Best screwdriver bit set with nut driver adapter buying guide

Piece count

Piece count decides how many fastener types one set covers. The SEDY set lists 232 pieces, the RLVKEAZ set lists 88, the Bluebow set lists 86, the ELEAD set lists 47 and the WORKPRO set lists 39. A larger count covers more sizes, so check the nut driver sizes in the set against the nuts on the job.

Bit steel

S2 steel and Cr-V steel are the two steels named across these sets. RLVKEAZ builds its bits from S2 steel, SEDY builds its set from Cr-V steel, and Bluebow, WORKPRO and ELEAD mix Cr-V with S2 bits. Bluebow and ELEAD add a manganese phosphate coating for corrosion resistance, and WORKPRO notes an electrophoresed surface with resistance to oxidation and corrosion.

Nut driver range

Nut driver range decides whether the set fits the nuts on the job. WORKPRO lists metric nut drivers from 4 mm to 14 mm and SAE from 5/32 in to 9/16 in, in 38 and 65 mm lengths. Bluebow lists deep nut drivers in 48, 65 and 80 mm plus a 17 mm open-end socket. ELEAD lists 16 nut driver pieces in metric and SAE sizes. RLVKEAZ and SEDY list nut drivers without giving every size.

Adapters and extensions

Adapters decide what the set plugs into. Every set here uses a 1/4 in hex shank or a 1/4 in socket, and WORKPRO and Bluebow list socket adapters in 1/4, 3/8 and 1/2 in sizes, while RLVKEAZ lists socket adapters without giving sizes. Bluebow adds 75 and 150 mm extension bars, a 200 mm flexible shaft and an angle driver. SEDY adds a 1/4 magnetic extension for electric screwdrivers, hand drills and pneumatic tools.

Case and storage

A case keeps 232 pieces from scattering across the garage. SEDY packs its set in a case with labeled slots, WORKPRO ships a sturdy tool box, and Bluebow ships a rugged carrying bag. RLVKEAZ and ELEAD name no case or box in the listing, so plan a spot on the shelf for the loose pieces.

Garage Fit Check

• Check the shank before the first job: every set here drives from a 1/4 in hex shank or a 1/4 in socket.
• Match the nut driver sizes to the job: WORKPRO lists metric from 4 mm to 14 mm and SAE from 5/32 in to 9/16 in.
• Mind the weight on the shelf: the RLVKEAZ set weighs 1.97 lb and the ELEAD set weighs 2.95 lb.
• Keep the small bits sorted: the SEDY case has labeled slots, and the WORKPRO box keeps 39 pieces in one place.
• Bluebow and ELEAD use a manganese phosphate coating that resists corrosion.

FAQ: garage tools

What does a nut driver adapter do?

A nut driver adapter lets a drill or driver turn nuts and bolts with a socket-style head. WORKPRO lists 3 impact socket adapters in 1/4, 3/8 and 1/2 in, and Bluebow lists ball-head adapters in the same sizes. RLVKEAZ lists socket adapters without giving sizes, and the adapter fits the 1/4 in hex shank, so the drill drives the nut driver like a bit.

How many pieces do I need in a bit set?

It depends on the fasteners on the job. These sets list 39, 47, 86, 88 and 232 pieces, and the WORKPRO set covers metric and SAE nut drivers in 38 and 65 mm lengths with 3 screwdriver bits. Check the bit types in the set: RLVKEAZ lists 9 types, from Phillips and Torx to Square and Triangle.

Do these bit sets fit an impact driver?

RLVKEAZ, SEDY, WORKPRO, Bluebow and ELEAD all describe their sets for impact drivers, and each uses a 1/4 in hex shank or socket. SEDY notes its set is made for impact driver and wrench accessories, and WORKPRO lists its nut drivers as impact driver bits. Match the shank to the chuck before driving.

What bit types do these sets include?

RLVKEAZ lists 9 types: Phillips, Torx, Security Torx, Hex, Square, Double Square, Slotted, Pozidriv and Triangle. ELEAD lists Phillips, Slotted, Hex, Pozidriv and Torx. SEDY lists hex, Torx, nut driver, Phillips, Square and star bits, and WORKPRO lists PH2 screwdriver bits with its nut drivers.

Related: the best cordless impact wrench for lug nuts, the best cordless ratchet for motorcycles, the best flare nut wrench set for beginners and our cordless tools hub.